A CPRI RF Measurement option for its BTS Master handheld base station analyser family has been introduced by Anritsu. It can reduce the operational expense (OpEx) associated with troubleshooting interference at base stations. The BTS Master-based CPRI RF measurement test set allows field engineers and technicians to conduct accurate RF measurements on Remote Radio Heads (RRHs) while remaining at ground level.
This eliminates the considerable expense and time associated with calling a tower crew to conduct interference measurements.
With the new option installed, the BTS Master can conduct RF measurements over the fiber optic CPRI link connecting the baseband unit (BBU) and RRH. To simplify configuring the CPRI link for RF measurements, Anritsu has developed preconfigured radio setups and an auto detect function in the option.
A sweep speed 10x faster than other solutions in its class allows the BTS Master-based CPRI RF measurement test set to capture burst signals missed by alternative methods. Complementing the sweep speed are two unique features – the ability to tune and pan on a displayed signal, and to zoom into a particular area of interest.
Faster sweep speeds and more detailed signal analysis allow field engineers and technicians to more efficiently locate the sources of interference and PIM.
Users can conduct CPRI Spectrum and CPRI Spectrogram measurements with the test set. The overall performance and capability give operations and maintenance groups, RF performance engineers, NEM performance groups and other professionals responsible for wireless network optimisation the ability to conduct all the required tests without the cost and time associated with dispatching a tower crew.
The CPRI RF option expands the comprehensive measurement capability of the BTS Master family, which consists of the MT8820T, MT8221B and MT8222B. All the handheld base station analysers have been specifically developed to support 2G/3G/4G wireless networks, and feature over 30 analysers in one instrument to meet virtually every measurement need.
Anritsu also offers a portfolio of optical transport testers to test and verify the CPRI links. These solutions leverage Anritsu’s extensive optical test history and can be used to confirm the RRH is powered-up correctly, that the fibers are connected correctly, the condition and cleanliness of the optical connector, and that the link has no excess loss from the RRH to the BBU. The transport testers can also verify that the correct wavelength SFP/SFP+ modules are installed and that the modules support the rate configured.