Dual function position sensor

14th August 2015
Posted By : Siobhan O'Gorman
Dual function position sensor

Offering a non-contacting position sensing technology in an innovative design that provides both linear and rotary position feedback in a single package, the Blade25 inductive position sensor has been introduced by Gill Sensors & Controls. The company’s proprietary inductive sensing technology can monitor the activator's (target) position in either a straight linear movement or in a curved 'arc' rotary movement as it passes over the sensing element. 

The Blade25 is a two piece sensor that measures either ±45° of rotary movement or ±12.5mm of linear displacement. In both cases there is no contact between the sensing element and the small metal 'target', which acts as the activator and attaches to the moving element in the assembly. The activator has an air gap between the second part of the sensor, which features a solid-state sealed electronics package that is surrounded by the activator.

Gill's Blade25 proprietary inductive technology eliminates the bearing and mechanical wear issues of conventional shaft driven sensors by separating the position 'activator' from the sensor's electronics. This separation eliminates the need for precise and expensive bearings. In addition, the air gap provides an unlimited mechanical life span, as the two pieces never come in contact. This technology is suited to extremely dirty and contaminated environments, in areas where strong magnetic fields are present, and in complex mechanical assemblies that have tolerance and wear issues over their lifetime.

The standard Blade25 sensor is available with analogue, PWM or serial output (RS232 19.2k 8N) and is specifically designed to meet stringent OEM environmental requirements with an IP67 rating. Manufactured in a thin, fully sealed 40x50x6mm package, the sensor's robust housing uses a side cable exit with 3.4mm jacketed cable. The device features a standard mild steel activator as the target. Alternately, OEM engineers can choose to integrate the activator feature into their designs for either linear stroke applications, or at the end of shafts for rotary applications. Gill engineers are available for consultation for incorporating this feature into their design.

As Paul Cain, Manager of Business Development for Gill Sensors North America, explains: "It's exciting that a single device can be used in both linear or limited angle rotary sensing applications. Unlike Hall effect sensors, Gill's technology is immune to outside magnetic influences, such as alternators, starter motors, audio speakers or large multiphase motors."

Pricing for the Blade25 starts at $47.00 per unit in production volumes.

You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Engineering Design Show 2019
16th October 2019
United Kingdom Ricoh Arena, Coventry
ELIV 2019
16th October 2019
Germany Bonn World Conference Center
Connected World Summit 2019
22nd October 2019
United Kingdom The Business Design Centre, London
Hotspots Specials 2019
24th October 2019
Germany Böblingen, Germany
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona