Sponsored

Texas Instruments brings you the latest in Processes

1st November 2024
Sheryl Miles
0

Here, you’ll find a selection of the latest news, products, and articles from Texas Instruments focused on Processes.

AM625SIP

General purpose system in package with Arm® Cortex®-A53 and integrated LPDDR4

AM625SIP is a System In Package (SIP) derivative of the ALW packaged AM6254 device, with the addition of an integrated LPDDR4 SDRAM.

Read more here.

Click here for the data sheet.

Quickly get started with MSPM0 MCUs

Designing in microcontrollers may be complex, but we make it simple for you by offering an easy-to-use ecosystem to get started as quickly as possible. Learn how to start evaluating from selecting our LaunchPad, navigating the SDK, to configuring device peripherals with SysConfig. Dive into our software ecosystem for any level of experience to simplify development of your design.  

Watch the video.

AM625

Human-machine-interaction SoC with Arm® Cortex®-A53-based edge AI and full-HD dual display

The low-cost AM62x Sitara™ MPU family of application processors are built for Linux® application development. With scalable Arm® Cortex®-A53 performance and embedded features, such as: dual-display support and 3D graphics acceleration, along with an extensive set of peripherals that make the AM62x device well-suited for a broad range of industrial and automotive applications while offering intelligent features and optimized power architecture as well.

To discover more, click here.

You can read the application note here.

Accelerating the adoption of Ethernet in factory automation with highly integrated processors

Ethernet-based industrial communications is not a far-off, unattainable vision of factory and process automation. It is being adopted at a rapid pace.

But with cost, complexity and scalability challenges, serial interface are still the standard for wired communications.

Read the technical article here.

AM243x Sitara™ Microcontrollers datasheet

AM243x is an extension of Sitara’s industrial-grade portfolio into high-performance microcontrollers. The AM243x device is built for industrial applications, such as motor drives and remote I/O modules, which require a combination of real-time communications and processing.

Discover more here.

AM6421

Single-core 64-bit Arm® Cortex®-A53, dual-core Cortex-R5F, PCIe, USB 3.0 and security

AM64x is an extension of the Sitara™ Industrial-grade family of heterogeneous Arm® processors. AM64x is built for industrial applications, such as motor drives and Programmable Logic Controllers (PLCs), which require a unique combination of real-time processing and communications with applications processing.

Interested in reading more? Click here.

AM2432

Dual-core Arm® Cortex®-R5F-based MCU with industrial communications and security up to 800 MHz

AM243x is an extension of Sitara’s industrial-grade portfolio into high-performance microcontrollers. The AM243x device is built for industrial applications, such as motor drives and remote I/O modules, which require a combination of real-time communications and processing.

Read more here.

Functional Safety Support for Arm®-based Microcontrollers and Processors

This white paper introduces functional safety concepts such as the hazard analysis and risk assessment, random and systematic faults, safety element out of context and IEC 61508 SIL and ISO 26262 ASIL ratings.

Find out more about the technical white paper here.

Industrial Communication Protocols Supported on Sitara™ Processors and MCUs

This application report shows the industrial communication protocols supported by each of the devices in the Sitara™ MCU+ and Sitara Arm® Cortex®-A processor portfolio, as well as where and how to get these protocols.

Read the report here.

MSPM0 ecosystem

Series of videos introducing the MSPM0 ecosystem, including topics such as training, evaluation modules (EVMs), porting, migrating, programming, debugging and hardware layouts.

Watch the videos here.

MSPM0G1505

Optimizing field sensor and transmitter applications with MSPM0 MCUs.

There are many different types of process inputs in the world of process control. Including temperature, humidity, flow, level, and pressure. These process inputs need to be measured by sensors that can convert measurements into suitable signal formats (either analog or digital), and then transmit those signals through a transmitter to a receiver, which interprets the signal and makes a control decision.

Find out more here.

DRV83xxEVM

Build Scalability in Cordless Power and Garden Tools Using Low-Cost MSPM0 MCUs

Today, cordless power tools (such as drills, saws, and impact wrenches) and cordless garden tools (such as leaf blowers, string trimmers, and lawn mowers) are smaller, lighter, more efficient, and more powerful due to advancements in battery technology and motor control techniques.

Discover more here.

MSPM0G3507

BLDC and PMSM control using sensorless FOC algorithm based on MSPM0 MCUs

In the modern world, motors are used in many products, such as power tools, e-bike, e-car, industrial robot, and more. BLDC (brushless DC) and PMSM (permanent-magnet synchronous motor) motors in particular provide advantages in terms of high efficiency, low noise and long life.

Discover more here.

Find the technical article here.

AM69A

32 TOPS vision SoC for 1-12 cameras, autonomous mobile robots, machine vision, mobile DVR, AI-BOX

The AM69, AM69A scalable processor family is based on the evolutionary Jacinto™ 7 architecture, targeted at Smart Vision Camera applications and built on extensive market knowledge accumulated over a decade of TI’s leadership in the Vision processor market. 

Read more here.

AM62X

How Vision Processors Are Expanding Edge AI Capabilities in Video Doorbell and Smart Retail Designs

With the trendiness of the term “edge AI” or talk of “having more intelligence at the network edge,” it’s easy to lose sight of the benefits of having more local, real-time processing that doesn’t rely on cloud-based resources to run artificial intelligence (AI) models.

Read the full article here.

AM62A7

2 TOPS vision SoC with RGB-IR ISP for 1-2 cameras, low-power systems, machine vision, robotics

AM62Ax is an extension of the Sitara™ automotive-grade family of heterogeneous Arm® processors with embedded Deep Learning (DL), Video and Vision Processing acceleration, display interface and extensive automotive peripheral and networking options. 

To find out more, click here.

TMS320F280039C

How processing in real-time drives high-performance power systems

The previous installment of this real-time control series focused on the sensing functional block of the real-time control signal chain. It’s easy to misunderstand the second functional block, processing, and assume that it is only tied to the core central processing unit (CPU) frequency or million instructions per second (MIPS), focusing purely on data crunching. In this series installment, I’ll demonstrate the value of processing through the lens of high-performance power systems, and dispel any misconceptions about the role of processing in real-time control systems.

Discover more here.

LMG3522

3-kW server PSU with GaN and C2000

Included in this reference design demo is TI’s latest top-side cooled GaN devices from the LMG3522 family, which additionally include built-in protection and power management. 

Click here to watch the video.

LAUNCHXL-F2800137

TMS320F2800137 LaunchPad™ development kit for C2000™ real-time MCU

LAUNCHXL-F2800137 is a development board for TI C2000™ real-time microcontrollers series of F280013x devices. Ideal for initial evaluation and prototyping, it provides a standardized and easy to use platform to develop your next application.

To read more, click here.

TMDSCNCD2800137

TMS320F2800137 evaluation module controlCARD

TMDSCNCD2800137 is a low-cost evaluation and development board for TI C2000™ MCU series of TMS320F280013x devices. It comes with a HSEC180 (180-pin high-speed) edge connector and, as a controlCARD, is ideal for initial evaluation and prototyping.

To learn more, click here.

TMS320F2800135

C2000™ 32-bit MCU with 120 MHz, 128-KB flash, FPU and TMU

The TMS320F280013x (F280013x) is a member of the C2000™ real-time microcontroller family of scalable, ultra-low latency devices designed for efficiency in power electronics.

Learn more by clicking here.

MSPM0G3507

80MHz Arm® Cortex®-M0+ MCU with 128KB flash 32KB SRAM 2x4Msps ADC, DAC, 3xCOMP, 2xOPA, CAN-FD, MATHA

MSPM0G350x microcontrollers (MCUs) are part of the MSP highly integrated, ultra-low-power 32-bit MCU family based on the enhanced Arm Cortex-M0+ 32-bit core platform operating at up to 80-MHz frequency.

To read more here.

MSPM0-SDK

MSPM0 software development kit (SDK)

The MSPM0 SDK provides the ultimate collection of software, tools and documentation to accelerate the development of applications for the MSPM0 MCU platform under a single software package.

Discover more here.

Securing Arm-Based Application Processors

Computer security once meant annoying viruses on PCs. Then, the stakes increased. Hacking into business and government systems exposed personal and financial information to fraud, theft and embezzlement. Now though, the security of embedded systems—or, more accurately, the insecurity of embedded systems—poses a threat to very critical data.

Read the full document here.

AM6411

Single-core 64-bit Arm® Cortex®-A53, single-core Cortex-R5F, PCIe, USB 3.0 and security

AM64x is an extension of the Sitara™ Industrial-grade family of heterogeneous Arm® processors. AM64x is built for industrial applications, such as motor drives and Programmable Logic Controllers (PLCs), which require a unique combination of real-time processing and communications with applications processing.

Discover more here.

Featured products

Product Spotlight

Upcoming Events

No events found.
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier