Power

DC/DC converter offers high efficiency & thermal performance

8th May 2015
Nat Bowers
0

Delivering up to 50A with a single fully regulated 12V output, a series of 600W quarter-brick isolated DC/DC converters has been unveiled by Artesyn Embedded Technologies. The ADQ600 series has an input voltage range of 40 to 60V and is primarily designed for use with standard 48V supplies in computing and server applications, as well as regulated 48V supplies in telecomms equipment.

An ultra-high efficiency of typically 95.6% at full load and the ability to operate over an ambient temperature range of -40 to +85°C, makes them a suitable choice for the isolated converter in a distributed power architecture supplying power to non-isolated converters. Their open-frame design is optimised for forced air or conduction cooling and an aluminium baseplate option is available for enhanced thermal performance. The conversion technology employs 175kHz fixed frequency switching to help minimise external EMI filtering requirements.

Standard features include output voltage trim and remote on/off, with input undervoltage and overvoltage lockout. The converters are comprehensively protected against output overvoltage, output overcurrent and overtemperature conditions. ADQ600 series converters have an enhanced pre-bias start-up capability and for high current applications two converters can be connected in parallel, automatically using the droop method of current sharing.

Artesyn ADQ600 series converters are low profile units that suit systems with demanding inter-board spacing requirements; the open-frame models have an installed height of 11mm (0.43"), while the baseplate versions require 13.3mm (0.52").

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier