austriamicrosystems announces new smartphone LCD backlight LED drivers with the industry’s highest efficiency and smallest PCB area

The AS3674 backlight driver family complements austriamicrosystems’ large portfolio of lighting management units which address backlight, smart light and ALS (ambient light sensing) processing inside a single IC. The AS3674 is a highly efficient 2 MHz DC-DC switch mode step-up converter controlling 5 current sources with each driving 2 LEDs in series. For added flexibility, the current for the LED channels can be set by an external resistor with a maximum of 25 mA per channel. The AS3490 incorporates the same functionality as the AS3674 but addresses only three LED channels.



A soft startup feature allows the AS3674 to be easily integrated into noise sensitive RF systems. The AS3674 is controlled by two enable inputs which can also serve as PWM inputs between 100 Hz and 800 Hz with 1:2000 dimming ratio. The 2 LED per channel configuration combined with the 2 MHz operating frequency of the converter allow the use of tiny external components such as a 4.7 AH coil and results in very high efficiency, up to 6% higher than the closest competitor.



“Today’s smartphones are power hungry miniature computers that use large displays with significant power requirements,” said Ronald Tingl, Senior Marketing Manager Illumination at austriamicrosystems. “Yet smartphone manufacturers are challenged to extend the battery capacity and shrink the overall size of the phone. The AS3674 addresses these 2 challenges by offering the industry’s highest efficiency with the smallest PCB area. In fact the total PCB area required is 60% smaller than today’s commonly used single string LED backlight solutions.”



The AS3674 operates from a 2.5 to 5.5 V power supply and includes a number of safety features such as undervoltage lockout, overcurrent and over-temperature protection and LED testing. Both the AS3674 and AS3490 are housed in space saving 12-ball WL-CSP package (1.7 x 1.4 x 0.5 mm, 0.4 mm pitch).