Cables/Connecting

Molex Showcases Interconnect Technologies at DesignCon 2009

26th January 2009
ES Admin
0

Molex Incorporated will present several demonstrations showing its newest and highest performing interconnect solutions at DesignCon 2009, which is held in Santa Clara, CA, 2nd - 5th February. During this year’s show, visitors to the Molex stand (booth 511) will discover all the latest advances and innovations in interconnect design technology. An impressive array of leading-edge products will be on show, as well as the opportunity to speak to Molex experts first hand.

Molex will demonstrate the electrical performance of its next generation of small form pluggable interfaces, ZXP. This connector will support data transmission at speeds of SFP+, up to and beyond 17 Gbps. ZXP technology is intended to support development of the next generation of applications, particularly 16 Gbps Fibre Channel. The technology will also lend itself to very high speed four lane interconnects to support emerging protocols such as 100 Gbps Ethernet.

Molex will showcase its Solder Charge Technology by facilitating silicon-driven 10 Gbps data rate signal transmission through a 14 SEARAY copper flex cable assembly. Solder Charge Technology is a new SMT attach method for printed circuit board adhesion. In the connector assembly process, stamping a Solder Charge is less expensive and more precise than melting a solder ball onto a metal lead.

The SEARAY Slim, a four-row, high-speed connector, offers the flexibility and headroom necessary for next-generation protocol improvements. It uses Molex’s Solder Charge Technology and squeezes 12.5 Gbps speeds in envelopes commonly limited to two-row architectures. Available in 7 to 15mm stack heights and 40 to 200 circuits, its narrow profile facilitates unobstructed airflow in a system.

Molex will showcase a 20 Gbps data rate signal transmission over a 1.0m copper backplane channel using the Impact evaluation backplane, along with Avago Technologies’ 65Nm embedded SerDes. The Impact backplane connector system is the fastest, densest backplane connector on the market. Functioning at data rates over 20 Gbps and offering superior signal density of up to 80 differential pairs per inch, Molex’s Impact system provides significant channel performance headroom for future system upgrades in both traditional backplane and midplane architectures. Impact is a finalist for the 2009 DesignVision Awards.

Molex will demonstrate a 10.3 Gbps (IEEE 802.3ap 10GBASE KR) data signal through Molex’s orthogonal copper GbX I-Trac backplane. GbX I-Trac is a broadside coupled, skew-equalised, 12.5 Gbps solution with low cross talk and superior impedance control. A unique feature of the GbX I-Trac system is the ability to use the same standard connector blocks for both traditional and orthogonal architectures. Market-leading 10 Gbps and IEEE 802.3ap 10GBASE KR platform designs currently use the 7-, 11- and 15-row GbX I-Trac technology.

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier