Power

Prepare for CEC Level VI

5th November 2015
Caroline Hayes
0

The countdown begins. In February 2016, the CEC (California Energy Commission) Level VI standard is due to come into effect. It will bring some significant revisions and definitions, advises Jon Vallis, Ideal Power.

Reducing the no-load power of external power supplies has resulted in estimated savings of 32billion kW in energy consumption, a reduction in CO² emissions by more than 24million tons and an annual saving of $2.5billion (US EPA (Environmental Protection Agency figures). These figures are the result of a decade of regulation and programmes by the industry, both voluntary and mandatory ones. The drive for ‘greener’ energy, however, means that a standard, due to be implemented in February 2016, will further reduce the energy consumed by external power adapters. In some cases, the reductions could result in as little as 20% of the levels allowed in previous standards.

A decade of progress

In 2004, the CEC introduced the first mandatory standard for energy efficiency, denoting a power supply that meets EnergyStar Tier 1 and Australia’s MEPS (Maximum Efficiency Performance Standards). Today, all external power supplies must meet CEC Level IV for the USA and Canada and Level V if shipped to the EU.

Jon Vallis: anticipates significant revisions with CEC Level VI

The next step, driven by CEC VI, is to further reduce no-load power in single and multiple voltage external power supplies. It introduces multiple output power supplies to the regulation and also addresses external power supplies below 250W. The standard has no-load power thresholds for single voltage, external AC/DC power supplies, low voltage and basic models, for categories of 1W and below, 49 to 250W and 250W and above. There are also limits for no-load power for multiple voltage external power supplies in the same power ranges.

Another distinction of CEC Level VI is that it does not apply to direct operation power supplies, i.e. those that function in an end product without the assistance of a battery. It does apply to indirect operation devices, i.e. those devices which are not battery chargers, but which cannot operate the end product without the assistance of a battery. EISA2007 will govern the limits of indirect operation power supplies.

Ideal Power products are now accredited to ISO-9001-2008

Exemptions to CEC Level VI include any device that may need FDA (Food and Drug Administration) approval for medical use; power the charger of a detachable battery pack, or charges the battery of a product that is fully, or primarily, motor-operated; and products made available as a service or spare part by the end-product manufacturer before July 1 2008.

The EU is revising its EcoDesign Directive (or ErP II for energy related products) which is considered to be a parallel standard. Countries such as Canada and Australia are expected to adopt CEC Level VI.

For help in meeting the increased levels of energy saving required to comply with CEC Level VI, the company has an IP support team to provide local assistance.

 

 

 

 

 

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier