Home > Products > Powersolve - PP3 Equivalent Primary and Rechargeable Lithium Batteries

Power

Powersolve - PP3 Equivalent Primary and Rechargeable Lithium Batteries

15th February 2012

Powersolve

ES Admin

0 0

Leading power supply specialist Powersolve just announced two new series of Lithium batteries designed to replace 9V PP3 batteries in applications that require long life, a stable operating voltage and a very low self-discharge rate. The G600 Series are rechargeable Lithium Polymer batteries while the CP9V Series are Lithium Manganese Dioxide primary batteries. • Long life • Stable operating voltage • PP3 Equivalent • Operate between -20 to +60ºC

G600 Series batteries are reusable alternatives to standard PP3 format alkaline batteries. They have a rated capacity of 600mAh and feature a standard charge cycle of four hours. These G600 batteries do not suffer from memory effect and come with a protective circuit module (PCM) which protects against over-charging, over-discharging and over current. They are fully safety tested for impact, crushing, short circuit and piercing and operate between -20 and +60ºC. Powersolve can also supply chargers.

With a nominal capacity of 1200mAh, CP9V batteries feature a maximum continuous current of 400mA, a maximum pulse current of 800mA and a self-discharge rate of less than 2% per annum @ 30ºC. Housed in an ABS case weighing just 33 grams, these batteries operate at temperatures up to +60ºC.

According to Powersolve’s Managing Director Peter Clark, versions can be manufactured to customer specific dimensions depending on quantities.