ITE certified 110W Class II external power supplies

18th December 2018
Posted By : Alex Lynn
ITE certified 110W Class II external power supplies

The introduction of the TDK-Lambda brand DTM110-C8 Class II (no ground wire needed) external power supplies rated at up to 110W output power has been announced by TDK Corporation. Certified to the IEC 60601-1 (medical) and IEC 60950-1 (ITE) standards, the series also complies to the latest EU CoC (Code of Conduct) Tier 2 and US DoE Level VI efficiency standards.

Applications include home healthcare and B and BF rated medical products, test, measurement and portable communications equipment.

The DTM110-C8 series is packaged in a rugged, low profile IP41 rated enclosure measuring 63x140x33mm. Output connections are made using a 4-pin power DIN latching connector with other types available upon request. The 90 to 264Vac input is applied via a two-pin IEC 320-C8 receptacle.

Seven output voltages are available (12, 15, 19, 24, 28, 36 and 48V) and will operate in ambient temperatures of -20 to +60°C with applicable derating below zero and above 40°C. Average efficiency is greater than 89% and off-load power consumption is less than 0.15W, measured in accordance with the EU and US efficiency regulations.

The units are safety certified to IEC/EN/UL 60950-1, IEC 60601-1-11 and IEC/EN/UL 60601-1 with CE marking for the Low Voltage, EMC and RoHS2 Directives. The DTM110-C8 also complies with IEC 60601-1-2 Edition 4:2014, EN 55011-B, EN 55032-B EMC and immunity standards. Operational altitude is 5,000m.

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

IFSEC 2019
18th June 2019
United Kingdom EXCEL, London
Sensor+Test 2019
25th June 2019
Germany Nürnberg Messe
The Digital Healthcare Show 2019
26th June 2019
United Kingdom EXCEL, London
unbound london 2019
17th July 2019
United Kingdom Old Truman Brewery, London
DSEI 2019
10th September 2019
United Kingdom EXCEL, London