High density 40W DC/DC converters with improved performance

31st October 2019
Posted By : Alex Lynn
High density 40W DC/DC converters with improved performance

TRACO POWER has announced their new TEN 40E and TEN 40WIE families of 40W high-density DC/DC converters optimised to reduce cost and improve performance in the industry standard two by one inch footprint. The primary difference between these two families of DC/DC converters is the TEN 40E has wide 2:1 input ranges of 9 to 18 / 18 to 36 / 36 to 75 VDC versus the TEN 40WIE series with 4:1 ultra-wide input ranges of 9 to 36 / 18 to 75 VDC.

Each family offers five single outputs of 3.3 / 5 / 12 / 15 / 24 VDC and three dual outputs of ±12 / ±15 / ±24 VDC. Standard features include: 1,600 VDC isolation; high efficiency operation up to 93%; remote on/off control; output voltage trim; -40 to +85°C operating temperature range (see derating); >1.2 million hours MTBF; and protection circuits for over-voltage / over-current and continuous short-circuit with auto-recovery.

All models are backed a three-year product warranty and safety approved to EN / IEC / UL 62368-1. Typical applications include industrial equipment, instrumentation, information technology and any distributed power architecture where weight and space are critical on the PCB. 

Products are in stock and available through the TRACO POWER global distribution network with manufacturing lead times of 12 to 14 weeks.


You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi
The Sensor Show 2020
16th June 2020
Germany Messe Munich