Half brick 150W DC/DC converters offer 8:1 input range

5th July 2017
Source: XP Power
Posted By : Alice Matthews
Half brick 150W DC/DC converters offer 8:1 input range

A series of 150W half brick DC/DC converters has been announced by XP Power, aimed at a wide range of applications where an ultra-wide input range are required. Conforming to the industry standard half brick footprint of 61.5x57.9x12.7mm (2.40x2.28x0.50"), and having pin out compatibility with existing industry standards, the QSB150 is highly efficient, typically up to 92%.

Available in six regulated single output models, covering all the popular nominal output voltages from 12-48VDC, a voltage trim function allows adjustment of ±10% of stated output if required to accommodate line losses or non-standard voltage requirements.

With an ultra-wide input range of 9-75VDC these units accept all nominal inputs of 12, 24 and 48VDC. By accepting three nominal battery voltages, using the QSB150 negates the need for a change in end equipment. Input to output isolation is 1,500VDC. A remote on/off input provides a method of sequencing start up and providing external control of the unit.

The QSB150 can operate in a wide range of environments and temperatures from -40°C to a maximum base plate temperature of 100°C.

The QSB150 complements the exiting QSB range of 75-600W base plate cooled modules in quarter brick, half brick and full brick packages with 2:1 and 4:1 input ranges and comes with a three year warranty.


You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

productronica 2019
12th November 2019
Germany Messe München
SPS IPC Drives 2019
26th November 2019
Germany Nuremberg Messe
Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi