Desk-Top back up battery unit powers hubs and routers

22nd February 2017
Source: Powersolve
Posted By : Peter Smith
Desk-Top back up battery unit powers hubs and routers

Powersolve just introduced desk-top “mini” uninterruptible power supplies (UPS) that provide back-up power in the event of an AC mains failure. The compact PUPS22 & PUPS44 UPS’s works from a 12VDC input using any approved 12V AC-DC plug-top charger capable of powering the load and with enough output power to charge the internal batteries. 

Powersolve’s ESA24-12 or ESA36-12 plug-top chargers are a good example.

According to Powersolve, both models are perfect for powering networking devices such as routers or other low power devices should the mains be interrupted. The UPS incorporates the latest Lithium Ion cells to provide an output capacity of 22 Watt/hours (PUPS22) or 44 Watt/hours (PUPS44) and a maximum output current of 2A. At full load, these products will provide battery back-up for one or two hours, or more at lower output loads.

The PUPS22/44 uses a constant current/constant voltage, trickle charge battery management system and, importantly, incorporates many features including discharge voltage protection and protection against charging over-voltage and input over-current. LEDs indicate charging and charged states.  Powersolve can supply a variety of input and output cable assemblies to suit most applications. There is also a new 5V output version available with 2A current rating.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

IoT Solutions World Congress 2018
16th October 2018
Spain Barcelona
Engineering Design Show 2018
17th October 2018
United Kingdom Ricoh Arena, Coventry
Maintec 2018
6th November 2018
United Kingdom NEC, Birmingham
electronica 2018
13th November 2018
Germany Messe Munchen
SPS IPC Drives 2018
27th November 2018
Germany Nuremberg