300W output power modules suitable for use in data centres

24th July 2017
Source: TDK-Lambda
Posted By : Alice Matthews
300W output power modules suitable for use in data centres

New, higher power models have been added to TDK's PH-A280 series of high voltage input DC/DC converters. Capable of operating from 200-425VDC, these 300W output power modules are suitable for use in data centres, telecommunications and renewable energy applications utilising a 380V nominal high voltage DC bus. The four new models are rated at 12V 25A, 24V 12.5A, 28V 10.8A and 48V 6.3A. This extends the existing 50-150W PH-A280 product range of 3.3, 5, 12, 24, 28 and 48V outputs.

The 300W models have a greater adjustment range of -60 to 20% to accommodate non-standard voltages.

Following the industry standard half-brick package (61.0x12.7x57.9mm), the 300W units, with efficiencies up to 92%, can provide full load with -40 to 100°C baseplate temperatures. The converters can also be conduction cooled making them suitable for use in sealed outdoor enclosures or liquid cooled applications.

All PH-A280 modules have a standard feature set, including a five-year warranty, remote on-off, and over-current and over-voltage protection. The series is fully isolated with an input to output isolation of 3,000VAC and safety certified to IEC/EN 60950-1, UL/CSA 60950-1 with CE marking for the Low Voltage and RoHS2 Directives.


You must be logged in to comment

Write a comment

No comments

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Building IoT products for smart healthcare market
8th February 2018
United Kingdom Cocoon Networks, London
Smart Mobility Executive Forum
12th February 2018
Germany Berlin
Medical Japan 2018
21st February 2018
Japan INTEX Osaka
Mobile World Congress 2018
26th February 2018
Spain Barcelona
embedded world 2018
27th February 2018
Germany Nuremberg