Thermistor delivers 680V for welding equipment
Ametherm has released a PTC circuit protection thermistor with an industry-high voltage rating for inrush current limiting and overcurrent protection in applications such as welding equipment and plasma cutters with extremely high voltages from 480 to 930V.
The MCL20 500100-A thermistor features a 680V voltage rating and handles a maximum inrush current of 20A at maximum peak voltage. The device offers resistance at 25°C of 50Ω with a tolerance of 20%, a dissipation constant of 55.0mW/°C, a heat capacity of 5.45J/°C, and a thermal constant of 62s. The thermistor operates over a wide temperature range of -50 to +150°C.
The radial-leaded MCL20 500100-A offers easy PCB mounting. With a 19mm diameter, 9mm maximum profile, and 7.8mm lead spacing, the thermistor provides designers with a more compact and cost-effective alternative to combining a power resistor, relay, and timer on one circuit to achieve the same functionality. The RoHS-compliant device is available with straight leads and outside or inside kinked leads.
"The MCL20 500100-A can withstand hundreds of hits of maximum inrush current without degrading," said Eric Rauch, President and CEO, Ametherm. "The device offers a short reset time, and as a PTC thermistor a quick reset will not result in a large inrush current, as its resistance is already at a high state. The result is extremely high reliability and stability in high-voltage applications, all while saving board space."
Product Spotlight
APV1111GVY
Panasonic
Panasonic PhotoMOS® Photovoltaic MOSFET High-Power Drivers
| SKU: | |
|---|---|
| Stock: | 3490 |
| Cost: | $3.95 |
