LED Illuminated Pushbutton Switches from knitter-switch can display two different messages

30th May 2012
Posted By : ES Admin
LED Illuminated Pushbutton Switches from knitter-switch can display two different messages
knitter-switch announces an illuminated panel mounted pushbutton Tact switch that uses LEDs to display two different symbols or messages. Each LP10 “double legend” pushbutton switch contains a combination of two coloured LEDs – red/blue, red/green and several single colours and one of two messages is visible depending on which LED is illuminated.
As an example, an “ON” message can be displayed if the green LED is powered, while an “OFF” message is shown if the red LED is powered.

According to knitter-switch, LP10 pushbutton switches are through-hole mounted, SPST (Off-Mom) switches with a minimum lifetime of 500,000 cycles. Actuation force is 160gf ±20gf and actuation travel is just 0.25mm +0.2/-0.1mm.

Measuring 10mm x 10mm with a height off the PCB of just 11mm, LP10 pushbutton switches features silver plated contacts and terminals rated at 24VDC / 50mA and a maximum contact resistance of 100mΏ. Operating temperature range is -25ºC to +70ºC.

Applications for LP10 switches include instrumentation, home automation products and multimedia devices.

Standard switches are available from a number of distributors throughout Europe. Samples are usually available on next day delivery. For more information visit www.knitter-switch.com

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Girls in Tech | Catalyst | 2019
4th September 2019
United Kingdom The Brewery, London
DSEI 2019
10th September 2019
United Kingdom EXCEL, London
EMO Hannover 2019
16th September 2019
Germany Hannover
Women in Tech Festival 2019
17th September 2019
United Kingdom The Brewery, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris