banner.jpg
Products    Industries   News & Analysis    Industry Events   Resource Centre
Power Newsletter
Sponsored
16th December 2020
4.8A synchronous boost converter with load disconnect
Read more
The TPS61378-Q1 is a fully-integrated synchronous boost converter with load disconnect function integrated. The input voltage covers from 2.3 V to 14 V, while the maximal output votlage up to 18.5 V. The switching current limit is programmable from 1 A to 4.8 A. It consumes 25 uA quiescent current from Vin.
Power
15th December 2020
DC/DC converter and AC/DC power supplies launched
Read more
Last year, Traco Power has launched more than 40 new series of DC/DC converters and AC/DC power supplies - despite of the COVID-19 pandemic. Traco Power’s product range focuses on the four vertical markets, listed below.
Power
15th December 2020
MagI³C-LDHM power module for LED power supply
Read more
With the MagI³C-LDHM (LED Step Down High Current Module) Power Module, Würth Elektronik now has the perfect solution for LED power supply in its portfolio. To make it even easier for developers to use these DC/DC converters with integrated controller IC, inductors and capacitors, Würth Elektronik now offers an LDHM Evaluation Board.
Power
15th December 2020
Fully integrated RF Synthesiser for low power uses
Read more
CML Microcircuits has introduced the CMX940, a fully integrated Fractional-N RF synthesiser with VCO that achieves low phase noise and spurious performance in a low power single-chip solution. The CMX940 surpasses the industry prerequisites for enabling a new generation of private mobile radio (PMR), data modems, marine radios and other wireless systems.
Sponsored
16th December 2020
Highly integrated USB Type-C with pre-configured GUI
Read more
The TPS25750 is a highly integrated stand-alone USB Type-C and Power Delivery (PD) controller optimised for applications supporting USB-C PD Power. The TPS25750 integrates fully managed power paths with robust protection for a complete USB-C PD solution. The TPS25750 also integrates control for external battery charger ICs for added ease of use and reduced time to market.
Power
14th December 2020
In-vehicle computer with SuperCAP UPS prevents data loss
Read more
Neousys Technology has announced that the rugged in-vehicle computer, Nuvo-7000VTC, powered by Intel 9th/ 8th-GEN Core i processor with up to 8 core/ 8-thread architecture and 64GB DDR4 memory is available in three variants. The Nuvo-7100VTC comes with hot-swappable 2.5” HDD/ SSD tray, while Nuvo-7200VTC has a single PCIe expansion slot and the Nuvo-7250VTC comes with a power backup module.
Power
14th December 2020
EiceDRIVER 2EDL8 gate driver ICs for 5G
Read more
Infineon Technologies has introduced the new EiceDRIVER 2EDL8 gate driver IC product family to foster the growth in DC/DC telecom bricks for mobile network infrastructure. These dual-channel junction-isolated gate driver ICs allow for high power density, high efficiency and robustness in isolated DC/DC step-down converters/telecom bricks enabling macro base stations for 5G and LTE telecom infrastructures.
Power
14th December 2020
SiC MOSFETs for miniaturisation of auxiliary power
Read more
GeneSiC Semiconductor has announced the immediate availability of next-generation 3300V and 1700V 1000mΩ SiC MOSFETs – G2R1000MT17J, G2R1000MT17D, and G2R1000MT33J. These SiC MOSFETs enable high performance levels, based on flagship Figures of Merit (FoM) that enhance and simplify power systems across energy storage, renewable energy, industrial motors, general-purpose inverters and industrial lighting.
Power
11th December 2020
DC/DC buck converters with 1/16th brick footprint
Read more
TDK has announced the introduction of the TDK-Lambda i7A series of 33A 500W rated non-isolated DC/DC buck converters, packaged with the industry-standard 1/16th brick pinout. The output voltage of these step-down converters can be adjusted from 3.3 to 24V and accept a wide range input voltage of 18 to 60V.
Power
11th December 2020
Automotive-compliant USB Type-C Port protector
Read more
Diodes Incorporated has announced the automotive-compliant, AEC-Q100 qualified, and PPAP capable DPO2039DABQ four-channel protection solution for USB Type-C ports. DPO2039DABQ is targeted for use in applications including automotive head units, rear seat entertainment units, and in-car charging.
Read more articles
Update my preferences
facebook.png Twitter instagram.png instagram.png instagram.png