|
|
|
|
|
|
|
|
|
| Without proper consideration, EMI can derail projects and create costly delays. With this new Vicor webinar, you will learn about basic EMI measurement, common and differential noise sources and identification methods, conducted EMI pre-compliance testing, layout issues, etc.
|
|
|
|
|
|
|
|
| The TPS92200 device is a 1.5-A synchronous buck LED driver with 30-V maximum input voltage. By integrating the high-side and low-side NMOS switches, the TPS92200 device provides high power density with high efficiency in an ultra-small solution size. The TPS92200 device uses peak-current-mode control and full internal compensation to provide high transient response performance over a wide range of operating conditions.
|
|
|
|
|
|
|
|
| COSEL has announced the addition of the MH3 series of high isolation 3W DC/DC converters for medical and industrial applications. Packaged in a Single In Line (SIP) type 8, the COSEL MH3 series has a reinforce isolation of 3kVAC, 4.2KVDC, complies with medical isolation standard (2MOOP (250VAC)) and ruggedized for industrial applications that might implies differential In/OUT voltage.
|
|
|
|
|
|
|
|
| TDK Corporation has announced the introduction of the WMM30 series of 25 to 30W medical wall mount power supplies. Certified to the medical safety standards IEC 60601-1 and EN 60601-1-11 and compliant to EN 60601-1-2 Edition 4 for EMC, the products have a Class II input requiring no earth ground.
|
|
|
|
|
|
|
|
| Delta Electronics has launched a new 2,000W AC/DC power supply designed for use in both medical and industrial applications - The IMA series 2,000W model comes in a compact size at 12.2”x5”x1.6” and provides a single 48V output with 5V/4A standby output.
|
|
|
|
|
|
|
|
| TRACO POWER’s new 30/65W TPI line of compact open frame AC/DC power supplies are cost-optimised for price sensitive Industrial, Automation and IoT applications. The TPI 30 provides 30 watts of power in a compact 3.34x1.38x0.77” open-frame package and single outputs ranging from 3.3~53V.
|
|
|
|
|
|
|
|
| In power electronics motor drives take up a major share in the market. With its CoolSiC MOSFET Modular Application Design Kit (MADK) boards Infineon Technologies has helped in further shortening time to market in this relevant segment. As part of the MADK platform for motors of up to 7.5kW, the evaluation board EVAL-M5-IMZ120R-SIC is a 3-phase inverter board aiming at servo drive applications.
|
|
|
|
|
|
|
|
| Microchip Technology has announced its AgileSwitch digital programmable gate driver and SP6LI SiC power module kit, a unified system solution to help designers quickly and effectively adopt disruptive Silicon Carbide (SiC) power devices – reducing time to market and ensuring confidence in field deployment.
|
|
|
|
|
|
|
|
| Proton-Electrotex has continuously worked to improve the current product line and develop new solutions in the field of power electronics. Because of this, the company is ready to present its latest developments which include IGBT module MIHA, Press-Pack IGBT and Single component module B0.
|
|
|
|
|
|
|
|
| Texas Instruments has introduced a DC/DC buck-boost converter that combines programmable input current limit and integrated dynamic voltage scaling to extend battery life by at least 50%. The TPS63900 maintains the industry’s lowest quiescent current (IQ), 75 nA, with 92% efficiency at 10µA and delivers up to three times more output current to help engineers extend the life span of battery-powered industrial and personal electronics applications.
|
|
|
|
|
|
|
|
|
|
Sent by Electronic Specifier Ltd.
To remove yourself from future e-mail distributions from ElectronicSpecifier, please click here to unsubscribe.
|
|
|
|
|
|
|
|
|
.jpg)
030920.jpg)
.jpg)
