Analysis

Bluewave 200 UV curing spot lamp

22nd June 2007
ES Admin
0
The DYMAX BlueWaveTM 200 UV curing spot lamp from Intertronics has a patent pending Intensity Adjustment feature allows simple, manual intensity adjustment during initial UV process validation and production. This major new feature not only enables consistant process timing, but also ensures consistant quality of adhesive curing. The improved predictability of bonding thus leading to higher quality and lower reject rates.
As with any manufacturing process, defining an acceptable processing window is a crucial step in developing a UV curing process. The new Intensity Adjustment feature permits engineers to evaluate the full range of intensity produced by the BlueWave 200 spot lamp, from 0 to 100% Thus, the upper and lower intensity limits of a UV curing process can easily be identified in an actual production setting. When in production, routine radiometer measurements performed in accordance with Good Manufacturing Practices will determine if any further intensity adjustments are required. The average BlueWave 200 bulb varies less than 1% over 8 hours of normal use, so daily or weekly adjustments are typically adequate to maintain a tightly controlled process.

The BlueWave 200 primarily emits UVA and blue visible light (300-450 nm) and is designed for UV curing of adhesives, coatings, and encapsulants. It contains an integral shutter which can be actuated by a foot pedal or PLC making it ideal for both manual and automated processes. A solid-state power supply provides consistent performance at any voltage (90-263 volts, 47-63 Hz). Intertronics also offers a wide array of Dymax long-lasting lightguides including liquid/fibre, single-multi-pole, and lightguides of various lengths. Further information regarding Intertronics’ products can be found at www.intertronics.co.uk

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier