Low-power ADCs from TI for portable industrial and medical applications

4th October 2007
Posted By : ES Admin
Low-power ADCs from TI for portable industrial and medical applications

Texas Instruments has introduced a pair of 16-bit analog-to-digital converters featuring 2x better linearity than competing devices (+/-1.5 LSB maximum INL). Combined with low-power operation, best-in-class temperature drift and either an industry-standard MSOP-8 or a 3mm x 3mm SON-8 package, the ADS8317 and ADS8326 provide an easy performance upgrade for portable, battery-powered applications including industrial data acquisition and portable medical instrumentation.

When operating at the full data rate of 250kSPS, the ADCs require very little power (10mW at 5V). At 200kSPS, power dissipation is less than 4mW at 2.7V. When operating at lower data rates, the high-speed operation enables the devices to spend most of the time in a power-down mode. For example, the average power dissipation is less than 0.2mW at a 10kSPS data rate (2.7V).

Both devices offer best-in-class temperature drift specifications for reliable measurements across the operating temperature range. The ADS8317 (true differential input) features 0.1ppm/C gain error drift and 0.2ppm/C offset error drift. The ADS8326 (single-ended input) delivers 0.3ppm/C gain error drift and 0.2ppm/C offset error drift.

The ADS8317 and ADS8326 are based on a successive approximation (SAR) capacitive charge redistribution architecture that inherently includes a sample/hold function. Each offers a high-speed, wide-voltage SPI™/SSI serial interface that can be used in a multi-device, daisy-chain configuration. Both devices operate over a wide supply voltage range of 2.7V to 5.5V.

The devices are the latest additions to TI’s leading portfolio of pin-compatible MSOP-8 SAR converters, which provide designers with resolution, speed and performance upgrades for their existing systems without requiring costly and time-consuming redesigns.

Along with the leading ADS83xx ADCs, TI delivers complete signal chain system solutions including the industrial-targeted TMS320C6000™ and C5000™ digital signal processors and C2000™ controllers, as well as MSP430 and TMS470 MCUs. TI also offers a range of operational amplifiers (such as the OPA365) and voltage references (such as the REF50xx) which are well suited to work with these ADCs to achieve highest performance.


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi