National Semiconductor - Highest-Precision Linear RMS RF Power Detector for 3G/4G Handsets
A new linear root-mean-square (RMS) radio frequency (RF) power detector from National Semiconductor Corp. (NYSE:NSM) offers the industry’s highest precision with up to 40 dB dynamic range. The PowerWise LMH2120 increases wireless coverage and extends battery life for third-generation (3G) and fourth-generation (4G) mobile handsets.National’s LMH2120 linear RMS RF power detector enables accurate RF power amplifier (PA) measurements, which are used to control transmit power and avoid interference with neighboring signals. The LMH2120 provides stable performance over the full temperature range of -40 degrees C to 85 degrees C, with a temperature variation of just +/- 0.5 dB over a wide 40 dB dynamic range at 1900 MHz, minimizing guard bands. This feature increases coverage and quality of service, such as higher uplink data rates at greater distance from the cell tower.
The LMH2120’s performance remains consistent across various modulation schemes in multi-mode handsets and data cards using CDMA, W-CDMA, UMTS, LTE, GSM and GPRS cellular standards. It provides modulation-independent measurements of less than 0.3 dB, which eliminates the extensive look up tables required for accuracy. The LMH2120 also includes a shutdown pin for reducing power consumption in between measurements to extend handset battery life.
The LMH2120 linear RMS RF power detector operates from a single 2.7V to 5V supply and provides an output voltage proportional to the RF input power in dBm. This minimizes the need for extra calibration and reduces the resolution requirement for the system’s analog-to-digital converter. Handset designers can connect the LMH2120 to the output of the PA with a directional coupler or a resistive tap.
The LMH2120 features a supply current of 2.9 mA and includes a low-power shutdown-mode that reduces power consumption to 3.8 uA. It supports frequencies of 50 MHz to 6 GHz, with an RF power detection range of -35 dBm to 5 dBm.
The LMH2120 joins the recently released LMH2110 LOG RMS RF power detector. The LMH2110 provides precise control of RF PAs operating from 50 MHz to 8 GHz, with an RF power detection range of -40 dBm to 5 dBm.
Pricing and Availability
Available now, the LMH2120 is supplied in a small 0.82 mm by 1.22 mm, 6-bump microSMD package and is priced at $2.40 each in 1,000-unit quantities. For more information on the LMH2120, or to order samples and an evaluation board, visit www.national.com/pf/LM/LMH2120.html.
1st March 2013
Caravan Alarm System Controlled by LPRS Wireless Keyfob and Receiver Module
15th November 2012
ADLINK Technology Announces Latest Industrial Mobile Handheld Device
19th December 2011
Fairchild Semiconductor’s Digital Microphone Series Converts ECM Outputs to Digital PDM Data Streams, and includes Temperature Compensation
13th October 2011
Hand held terminals optimised for retail and industrial applications
27th September 2011
Toshiba Launches Wireless IC Compliant with TransferJetTM Close Proximity Wireless Transfer Technology
16th September 2011
TI introduces the industry’s smallest High-Speed USB protection device for portable applications