AEC-Q200-qualified resistors have low TCR tracking

1st May 2015
Jordan Mulcare

AEC-Q200-qualified, high-precision, dual-in-line, thin film resistor networks from Vishay Intertechnology have low TCR tracking of ± 5ppm/°C. The AORN series also have tight ratio tolerances to ± 0.05% and long-term ratio stability of 0.015 % after 1,000 hours at +155°C. For improved ESD and moisture protection, the resistor networks are constructed with a tantalum nitride resistor film on a high-purity alumina or ceramic substrate.

The devices are available in two configurations: as four equal-value resistors ranging from 1 to 100kΩ and as two resistor dividers in the same package with ratios from 1:1 to 1:100. A rugged moulded 0.050" pitch construction and narrow (0.150") 8-pin SOIC packages are in accordance with JEDEC MS-012. The devices offer a typical power rating of 100mW per resistor element.

The integrated construction allows for higher precision over discrete SMT chips claims the company, making the devices suitable for precision voltage dividers, op amps and battery management applications. Typical end products will include automotive, telecommunications, industrial, process control and medical instrumentation. 

Per AEC-Q200, the resistor networks are rated for ESD to 2kV at higher than 10kΩ. The devices have noise lower than -30dB and voltage coefficients of lower than 0.1ppm/V. The temperature range is -55-+155°C. All devices are RoHS-compliant and halogen-free and pass the sulfur resistance test per ASTM B 809.

Featured products

Upcoming Events

View all events
Latest global electronics news