Crystal oscillators feature 300fs RMS phase jitter

15th January 2015
Source: IDT
Posted By : Siobhan O'Gorman
Crystal oscillators feature 300fs RMS phase jitter

Two families of crystal oscillators, which are customisable for frequencies from 16kHz to 1.5GHz, have been introduced by Integrated Device Technology (IDT). Suitable for networking, communications, data I/O, storage and server applications, the XU and XL oscillators feature a typical jitter value of 300fs RMS with a maximum value of 400fs, integrated over 12kHz to 20MHz.

The XU devices are available in LVPECL, LVDS, HCSL and HCMOS outputs, with operating voltages of 3.3, 2.5 or 1.8V. Offered in 7x5 or 5x3.2mm packages, the crystal oscillators feature frequency stabilities as low as ±20ppm and operate across a temperature range of -40 to +85ºC.

Available in LVPECL, LVDS and HCMOS outputs, the XL devices are offered with operating voltages of 3.3 or 2.5V. The crystal oscillators, which are available in 7x5, 5x3.2 or 3.2x2.5mm packages, feature frequency stabilities as low as ±20ppm and operate across a temperature range of -40 to +85°C.

“The XU and XL crystal oscillators are IDT’s response to the increasingly stringent jitter requirements resulting from higher data throughput in serial IO technologies,” commented Dave Shepard, Vice President and General Manager, Timing and RF Division, IDT. “Our oscillators offer designers a reliable and economical solution to address the growing challenges of frequency control.”

Downloads


You must be logged in to comment

Write a comment

No comments




Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Vietnam International Defense & Security Exhibition 2020
4th March 2020
Vietnam National Convention Center, Hanoi
The Sensor Show 2020
16th June 2020
Germany Messe Munich