new product family is introduced as part of Jennic’s ongoing wireless microcontroller strategy. Jim Lindop, CEO of Jennic commented, “With our first generation products in volume production, Jennic is now demonstrating its ability to execute against an aggressive roadmap which yields continual improvements to radio, power consumption and processor performance. In addition, we are meeting the low price requirements for mass market acceptance of wireless microcontrollers.”
The JN513x family second generation wireless microcontrollers realizes a number of improvements over the existing solution: Extended range is achieved with a new modem architecture that provides 97dB receive sensitivity, and is more robust in noisier environments with greater tolerance to carrier offset and EVM. Transmit power is also improved to +3dbm. The JN513x family is the only single-chip wireless microcontroller with a 100dB link budget and specified over the full industrial temperature range and wide supply voltage; Deep sleep current consumption is 400nA allowing products waiting for a user-event to consume virtually no power. For an active part of a wireless sensor network, with on-chip oscillator and protocol timers running, sleep current consumption is under 2μA. These sleep power consumption figures, in conjunction with the tight coupling of radio, protocol hardware and software on a single-chip wireless microcontroller set a new industry benchmark for wireless sensor applications requiring extremely long battery life; The memory available has been increased to 192k ROM and 96k RAM allowing full exploitation of the on-chip 32-bit RISC processor for complex applications and algorithms coupled with ZigBee or other mesh protocol stacks. Variants are available with 32k, 16k or 8kB RAM for simpler, low cost applications; The on-chip ROM includes the world’s first IEEE802.15.4 version B media access protocol layer, provision for a range of external serial EEPROM devices, over-the-air download, hardware abstraction layers and a simple serial interface. Embedding these features in ROM free up memory space for applications and allow simple dongle products at low cost. IEEE802.15.4B and ZigBee variants of the JN513x family are available.
A family of modules provide ceramic antenna, SMA and UFL connector options. Standard power and high power modules are also available offering link budgets of 100dB and 119dB respectively. The standard module has demonstrated operation over 1km and the high-power module over 4km in open-space environments. Modules meet FCC, ETSI and TELEC regulations, reducing the effort needed to integrate Jennic devices into end products.
A new generation of evaluation kits are available. These provide a controller and four sensor units with a range of plug-in modules, offering power and antenna options. Users will now be able to evaluate different module types to suit their application and environment, with a range of site survey tools, including a customizable packet error rate measurement routine.
Developers can lower their tool investments and learning curves using a new release of Jennic’s free, Integrated Developer Environment. This includes a new C compiler offering a 10 percent code density improvement.
JN513x products are now available for general sampling in a 56-pin QFN RoHS-compliant package. The JN513x product family includes the JN5139 wireless microcontroller with 192k ROM, 96k RAM at $3.50 in 100k quantities down to the JN5131 with 192k ROM, 8k RAM at $2.95 in 100k quantities. For additional information, contact any Jennic sales representative or authorized worldwide distributor.