The expense of wiring up and plugging in the modules of a photovoltaic system comprises between 10 - 20% of the entire cost of each unit. The aim of installers and system operators is to reduce these costs. This can be achieved, for instance, by using preassembled cables, such as those supplied by Yamaichi.

The Y-ConJack-31 is a new RJ45 connector jack for PCB with integrated magnetic filter, and LED light pipes for the function display. The jack is particularly suited to industrial applications such as industrial ethernet. The function principle of the integrated magnetic filter module definitely makes a decisive contribution to the signal conditioning, thanks to the galvanic separation (potential separation) and the additional components. Overlaye...

With the FMS006-7000-0 Yamaichi enlarges its portfolio of high-quality SIM card readers. The special feature of this 6-pin reader is the tray function. It is particularly suitable for applications requiring a frequent change of the SIM card or the easy access to the card without opening of the enclosure. The SIM card is placed in the tray and then inserted with the tray into the card reader. Thus the SIM card is completely protected by the card r...

Yamaichi Electronics presents a new high frequency connector. The High Speed portfolio is extended by this coax antenna connector system.

Yamaichi Electronics now offers an innovative High Speed ZIF connector for FFC/FPC. Thus the already existing Flip Type connector series HF601 has been extended by a 22 pin High Speed version for data transfer rates of up to 3 Gbps.

Yamaichi Electronics offers a new manual microSD Card reader, the PJS008U-3000-0, for vertical insertion and extraction, i.e. in the 90° angle to the PCB. The PJS008U-3000-0 is a manual microSD Card reader for all microSD Cards in compliance with the specification of the microSD Card standard. The positioning pins and the DIP connection to the PCB ensure the secure fixing of the card reader on the PCB. Thus the PJS008U-3000-0 is as stable as the...

Yamaichi Electronics now offers the FPS009-2910-0, a new Push / Push SD Card connector with stand-off. The card reader FPS009-2910-0 has been newly developed on the basis of the already established top mount component FPS009-2901-0. It offers the same advantages but also an interesting new feature: the card reader has a stand-off of 1.2mm and thus allows for mounting of other components underneath / below the reader.

Yamaichi Electronics now offers with the FMS008-4000-xx connector a variable reading system for SIM and Smart cards. The card reading system’s basis is a 8-pin SIM block card reader which is special because of its low assembly height of 0.95 mm. This low profile allows for an embedded assembly processing, i.e. the card reader is embedded into the PCB. This feature significantly facilitates the insertion of the cards and additionally reduces the...

Yamaichi Electronics now offers a novel flip type ZIF connector for FFC/FPC and thus enlarges its portfolio of board-to-cable connections. The new series HF601 is a zero insertion force FFC connector with a 0.5mm pitch and a minimal height of 2mm, which combines plug security and variability due to a wide range of different pin counts.

Yamaichi Electronics enlarges its portfolio of board-to-board and board-to-cable connecters with two new connector types, BoardFit and MatchCon. BoardFit (P3/P4 series) unifies the attributes of a miniature connector with the possibility to transfer currents up to 9A. Therefore, the series has been designed with two variants: BoardFit 3.0 possesses a 3mm pitch and transfers up to 5A. If higher currents up to 9A are needed BoardFit 4.2 can be us...

Yamaichi Electronics has enlarged its portfolio of board-to-board and board-to-cable connecters with two new connector types, MatchCon and BoardFit. The MatchCon connectors are described here. The new MatchCon connectors (MBP/MBS series) are characterized by a special contact design which is particularly qualified for applications with strong vibration exposure, e.g. in the automotive area. Due to positioning springs the male and female contacts ...

Yamaichi Electronics has enlarged its portfolio of board-to-cable connection systems for high speed applications. The series HF507S are board connectors characterised by transfer rates up to 5Gbps. They are available with 21, 31, 41 and 51 pin counts, in 180° or 90° and additionally in shielded or unshielded versions.

Yamaichi Electronics now offers the FPS009-2409-0, a new push/push SD/MMC card connector. The well-known top mount component FPS009-2405-0 for SD and MMC cards has been revised and replaced by the improved card holder FPS009-2409. The PCB layout is unmodified compared to the old version which means that the new card reader can be used with the existing layout.

With years of experience in the development and sale of standard and customised connectors, test & burn-in sockets and test contactors, Yamaichi Electronics has now reinforced its commitment for the small-to-medium sized cable assembly business.

The latest in the range of high-end test contactors, PCBs and burn-in sockets offered by Yamaichi Electronics is now individual spring contact pins, so-called spring probe pins. Besides semiconductor and sensor testing, they can also be used in other areas, such as medical/space, application testing, failure analysis, programming, and burn-in.

Embedded computing systems based on the MicroTCA standard (Micro Telecommunications Computing Architecture) are now used not only in the telecommunication sector, but also in areas like industry, the military, and traffic or medical technology. The PICMG MicroTCA.0 basis specification relies on the use of Advanced Mezzanine Cards (AMC). The small footprint of the AMC allows systems to be built in extremely compact and robust form. For shelf manag...

The Y-ConBluetooth-Dongle-1 is an IP67/68/69K device for wireless data transmission according to the Bluetooth SIG 2.0 standard. Y-ConBluetooth-Dongle-1 is a Class 2 device working on 2.4 GHz, with a maximum data rate of 3 Mbit/s.

The Y-ConBluetooth-Dongle-1 is an IP67/68/69K device for wireless data transmission according to the Bluetooth SIG 2.0 standard. Y-ConBluetooth-Dongle-1 is a Class 2 device working on 2.4 GHz, with a maximum data rate of 3 Mbit/s.

Yamaichi Electronics has introduced the new QFN socket series NP506 with ultra fine pitch 0.4 mm and 0.5 mm in open-top design for the test & burn-in of small IC packages.

Yamaichi Electronics now offers a new multi-card or combination card connector. The FRS016T-2000-0 offers two slots offset by 90° and stacked in one casing for microSD flash memory cards as well as SIM chip cards. The SIM card is operated manually at that and the microSD card via the convenient Push/Push mechanism.