Vincotech GmbH

Address:
Vincotech GmbH
Biberger Straße 93
82008 Unterhaching / Germany



82008 Unterhaching
Germany

Phone: +49 (0) 89 8780 67 - 0

Fax: +49 (0) 89 8780 67 - 300

Web: www.vincotech.com


Vincotech GmbH articles

Displaying 1 - 20 of 32

SiC switches in motor drive applications

SiC switches in motor drive applications
  Patrick Baginski, Vincotech, takes a closer look at the benefits, impacts and limitations of SiC switches to the induction motor
26th April 2019

The latest benchmark for low-power industrial packages

The latest benchmark for low-power industrial packages
Vincotech has announced the release of the flow E1/E2 product family. Featuring the latest chip generations, these products also deliver superior thermal performance. This line goes to augment an offering that already includes PIM (flowPIM E1/E2) and sixpack (flowPACK E1/2) configurations for 600V and 1200V with extended power ranges up to 100A.
5th June 2018

NPC modules maximise power density and minimise losses

NPC modules maximise power density and minimise losses
  Supplier of module-based solutions for power electronics, Vincotech, has announced the launch of new neutral-point-clamped power modules featuring the latest IGBT technology for three-phase solar, UPS and ESS applications. Engineered to address the key challenges of high efficiency, low weight and small size, these flowNPC 2 modules outperform standard products.
10th January 2018


High speed modules offer reduced switching losses

High speed modules offer reduced switching losses
Supplier of module-based solutions for power electronics, Vincotech, has announced the launch of a new 1,200V sixpack family - flowPACK 1 and flowPACK 2 - featuring high-speed IGBT4 technology for reduced switching losses. These modules are a suitable fit for servo applications and line converters for elevator drives demanding switching frequencies up to 16kHz.
19th October 2017

Next-gen IGBT chips power six flow, MiniSKiiP and VINco E3 modules

Next-gen IGBT chips power six flow, MiniSKiiP and VINco E3 modules
PCIM Europe 2017: Six product families, powered by the seventh generation of Mitsubishi (M7) IGBT chips have been announced by Vincotech.
22nd May 2017

Intelligent module reduces components for motor drive assembly

Intelligent module reduces components for motor drive assembly
PCIM Europe 2017: Vincotech has developed the flowIPM 1C intelligent power module for 1200V applications, and claims it reduces both cost and footprint in industrial applications.
19th May 2017

Higher performance at lower cost with latest booster

Higher performance at lower cost with latest booster
Vincotech has announced the launch of a new line of modules called flowBOOST 1 symmetric. Engineered to deliver top switching frequencies (up to 50 kHz), these modules are able to provide a symmetric boost in 1300 V or a buck boost in 650 V applications. They also enable to use smaller and even lighter passive power components to decrease system sizes.
23rd March 2017

Donation supports women's education in central Java

Donation supports women's education in central Java
Supplier of module-based solutions for power electronics, Vincotech, has pledged €12,000 (£10,227) to support an educational project for women in central Java. This grant is in lieu of the company's traditional seasonal gifts to business partners. The funds are earmarked to support vocational training sponsored by Plan International Deutschland.
10th February 2017

Modules suitable for soft- and hard-switching applications

Modules suitable for soft- and hard-switching applications
Vincotech announced the launch of the new fastPACK 0 MOS and fastPACK 1 MOS. They are well suited for charger, SMPS and welding applications. These new modules feature a cost-effective H-bridge topology with MOSFETs and integrated capacitors in a rugged housing, which makes them suitable for both soft- and hard-switching applications. The fastPACK 0 MOS module is rated for 650 V / 80 mΩ and fastPACK 1 MOS for 40 mΩ – 20 mΩ.
2nd February 2017

1200V IPM provides the deepest level of integration

1200V IPM provides the deepest level of integration
Supplier of module-based solutions for power electronics, Vincotech has announced the launch of a deeply integrated Intelligent Power Module for 1,200V applications. The company claims that the flowIPM 1C CIB 1200 V achieves the deepest level of integration of any power module available on the market today to drive down systems' cost and speed up assembly.
18th January 2017

Up to 200 A with Mitsubishi Electric gen 7 chip

Up to 200 A with Mitsubishi Electric gen 7 chip
Vincotech announced that the company has released a new MiniSKiiP product line. Featuring sixpack topology and able to handle up to 200 A, these MiniSKiiP PACK 2 and MiniSKiiP PACK 3 modules are available with the new Mitsubishi Electric's latest gen 7 chips. Vincotech’s 1200 V MiniSKiiP PACK 2 & 3 modules reduce static losses by 20%. Designed for industrial and embedded drive applications, these sixpack modules provide superior EMI behavior and cut overall system costs.
12th October 2016

H-bridge module improves bi-directional power performance

H-bridge module improves bi-directional power performance
Claimed to improve UPS, SMPS, solar and welding applications in terms of speed, efficiency and full-current capability for bi-directional use power electronics, Vincotech has launched the fastPACK 0 HC.
13th September 2016

A smaller and faster IPM with CIP topology

A smaller and faster IPM with CIP topology
The launch of a new, deeply integrated Intelligent Power Module for 600V applications has been announced by Vincotech, a supplier of module-based solutions for power electronics. The flowIPM 1B CIP 600 V features the powerful combination of a high-speed F5 IGBT with the switching performance of a MOSFET and a silicon carbide boost diode in the PFC circuit optimised for frequencies up to 150kHz.
23rd August 2016

Slashing costs and shrinking footprints

Slashing costs and shrinking footprints
A deeply integrated intelligent power module for 600V applications has been launched by Vincotech. The flowIPM 1B CIP 600V features the combination of a high speed F5 IGBT with the switching performance of a MOSFET and a silicon carbide boost diode in the PFC circuit optimised for frequencies up to 150kHz.
22nd August 2016

Keeping a step ahead with Vincotech's three level design

Vincotech has announced the launch of a unique three-level solution for high-voltage solar and ESS applications. The cost-efficient new flowNPC 1 split meets the demands of sophisticated devices by combining two fast modules to improve thermal performance and enable four-quadrant operation.
31st May 2016

Low-profile package suits motion control, solar & UPS applications

Vincotech has announced the launch of a new industry-standard low-profile package for mid-power inverters. Engineered mainly for industrial drives, solar power and UPS applications, the VINco E3 package raises the performance bar with its enhanced power density and reliability.
31st May 2016

MiniSKiiP meets half-bridge in Vincotech's recent line

Vincotech has announced that half-bridge MiniSKiiPDUAL modules have been added to the standard MiniSKiiP product line, thereby extending the power range all the way up to 90kW for 650V and 1200V applications. Equipped with solder-free spring-contact, Vincotech’s  MiniSKiiP half-bridge modules can now replace baseplate modules with screwed bus bar connections to drive down inverter package and manufacturing costs by as much as 15%.
31st May 2016

Gearing up for next-gen UPS with PFC module

Gearing up for next-gen UPS with PFC module
Vincotech has announced the release of the flowSPFC 0, a new symmetric PFC module aimed to help vendors step up efficiency, drive down costs and make the most of next-gen UPS. This ultra compact module packs a lot of power into a petit housing. With an efficiency rating ranging up to 99.2%, impressive performance and a remarkably low price, the flowSPFC 0 line goes a long way towards cutting manufacturers' overall system costs.
29th February 2016

Housing modules allow users to save space on the PCB

Housing modules allow users to save space on the PCB
Vincotech has announced the release of the extension of its housing family flow90, with the new flow90 0. The flow90 housings are used for standard products with CON, PIM and PACK configurations and make the most of the PCB to minimise the application‘s footprint.
15th February 2016

PFC module draws maximum power from the grid

PFC module draws maximum power from the grid
Vincotech has announced the release of flowPFC 0 CD modules. Engineered to optimise energy quality and consumption for welding, SMPS and embedded drive applications rated from 1 to 6 kW, these power factor correction modules draw maximum power from the grid.
9th December 2015


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EMO Hannover 2019
16th September 2019
Germany Hannover
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
HETT 2019
1st October 2019
United Kingdom EXCEL, London
World Summit AI 2019
9th October 2019
Netherlands Taets Park, Amsterdam
New Scientist Live 2019
10th October 2019
United Kingdom ExCeL, London