It has been announced that Stackpole's ZV Series of multilayer varistors protect low voltage electronics from high voltage transient surges. The ZV is available in sizes 0603, 0805, 1,206, 1,210, 1,812, and 2,220 in AC operating voltages from two to 130V, DC operating voltages from three to 170V.

  The RNCF Series from Stackpole is a thin film chip resistor series capable of precision. From sizes 0201 up to 2512 the RNCF offers 0.01% tolerances for a wide range of resistance values. The RNCF also offers TCR down to 2ppm for a significant value range for all sizes but the 0201 size.

The WW Series high temperature silicone coated wirewound resistors meet UL94V-0 flammability requirements. The all welded WW is available in power ratings from 0.5 up to 11W and tolerances from five to 0.1%. Typical TCR for the WW series ranges from 90 ppm or better for resistance values below one ohm to 20ppm or better for values above ten ohms.

  The RPC Series from Stackpole is an anti-surge chip resistor with superior pulse handling performance compared to standard thick film chips. Stackpole has recently added an 0402 chip size rated at 0.2W and featuring values from 1Ω to 1M in tolerances as low as ±0.5% and TCR as low as ±100ppm.

  Stackpole’s ultra precision current sensing chip resistors, the CSS Series, offers precision tolerances as tight as 0.5% and TCR as low as 15ppm. Recently, Stackpole extended the value range for the 0603 size adding a 4mΩ value and the 0805 size adding a 3mΩ value.

Stackpole is now stocking the MLFA AEC compliant metal film melf resistors. The MLFA is available in a 0.4W rated 0204 size in the MLFA25 and a 1W rated 0207 size in the MLFA1. The MLFA has exceptional stability demonstrated over life, biased humidity, and short time overload testing. In addition, the MLFA offers pulse power handling up to 3500 watts for single short duration pulses, and lightning surge withstanding up to 6KV for resistance value...

Stackpole is now stocking the most popular sizes and resistance values of its HVA Series. The HVA Series offers high voltage handling up to 8000V in a small package size. The RoHS compliant and halogen free HVA Series offers resistance values from 1M up to 1G in tolerances as low as 1% and in 200ppm TCR. The high voltage film achieves VCR of 20ppm/V or better.

It has been announced that Stackpole's new HCSM2818 is a 5W surface mount part with an all-metal element and moulded construction. The HCSM2818 is available in resistance values of four, five, ten, 15, and 20mΩ in one and five percent tolerances. TCR is 200 ppm for the values below ten milliohm and 75ppm for values of ten milliohm and above.

Stackpole's HCJ Series, a surface mount chip jumper, offers current ratings ranging from 14.2amps for the 0402 up to 63.2amps for the HCJ2512. In comparison, the typical rated current for a standard 2512 thick film jumper is 3amps. The HCJ0402 has a maximum resistance of 3mΩ while the other sizes have a maximum resistance of 0.5mΩ. This ensures much lower power dissipation for the HCJ compared to similar jumpers with typical resi...

It has been announced by Stackpole, that the PV Series offers two chip sizes, 3225 and 4032. These two sizes correspond to the equivalent five and seven millimetre disk MOV's offering protection for circuits with working voltages ranging from 11 to 300VRMS. 

It has been announced that Stackpole's RNV Series meets IEC 60065.14.1 standards handling up to 7kV for 50 discharges of a 1nF capacitor. 

Stackpole's RV series of radial leaded metal oxide varistors is available in a wide range of disk sizes and working voltages designed for general purpose overvoltage protection. The RV series is UL1449 certified and offers disk sizes from 5 up to 20mm with peak current ratings up to 18,000A and energy handling up to 792J. The RV series offers protection for electronics with operating voltages ranging from 14 to 1,465VDC.

The HCSK Series from Stackpole is a surface mount metal element high current shunt with four terminals. Four terminal Kelvin sense resistors provide accurate sensing as it removes the effect of lead resistance in the sensing function. The HCSK2725 rated at 5W at an ambient temperature of 100ºC utilises materials and a raised element which provides tolerances as low as 1% and TCR of 50ppm/ºC.

The HDM Series from Stackpole is an axial leaded carbon film technology resistor with moisture withstanding capability. Axial leaded resistors that need to withstand high humidity typically require a metal glaze technology which is considerably more expensive. The HDM Series can survive 100 hours in a pressure cooker at 120°C, over 98% relative humidity and two atmosphere’s pressure while standard carbon film and metal film resistors wo...

  Stackpole has announced the release of the HVAM Series, an axial leaded series of precision resistors designed for high voltage handling and high resistance values. The HVAM offers resistance values from 500K ohms to 10G ohms depending on size and tolerance. 

  Global manufacturer of resistors, Stackpole, has announced its UHV series which offers high voltage ratings per package size. The UHV2010 is rated up to 6KV, UHV2512 rated up to 10KV, UHV3512 rated up to 12KV, UHV4020 rated up to 16KV and UHV5020 rated up to 20KV.

  The CSRF series from Stackpole is a foil on ceramic carrier technology which offers very low resistance values and low TCR in small chip sizes. With 0.25W rated 0402 size chips in values down to 3Ω and 0.5W rated 0603 size chips in values down to 2.5Ω, the CSRF is a suitable choice for electronics.

  Global manufacturer of resistors, Stackpole, has announced an AEC-Q200 compliant series of precision thin film chip resistors. The RNCF offers sizes from 0201-2512, with a tolerance of 0.01% and TCR of 2ppm available for a select value range for sizes from 0402-2512.

  Global manufacturer of resistors, Stackpole Electronics has announced its RMCF series which is aAEC-Q200 qualified series of thick film chip resistors. This series has thousands of the most popular values in stock in sizes from 0201 through 2512.

  The HVAM series of high voltage axial leaded resistors has been released by Stackpole Electronics. The HVAM deposition technology produces a non-inductive resistive element with high stability, low noise and high voltage ratings. Precision tolerances are available down to 0.1% with TCR as low as 50ppm.