Stackpole Electronics Inc

Address:
2700 Wycliff Road
Suite 410
Raleigh
NC 27607
United States of America

Phone: +1 (919) 850-9500

Fax: +1 (919) 850-9504

Web: www.seielect.com


Stackpole Electronics Inc articles

Displaying 81 - 92 of 92

HMC Series Economical Chip Resistors with Resistance Values Up To 10G Ohms

HMC Series Economical Chip Resistors with Resistance Values Up To 10G Ohms
The HMC series from Stackpole is a thick film based chip resistor series capable of high resistance values. This series utilizes special high resistance inks and volume production to achieve a chip resistor that is capable of extremely high resistance values without significant cost increase.
2nd April 2013

Stackpole releases the SM8035 for High Energy Pulse Applications

Stackpole releases the SM8035 for High Energy Pulse Applications
Stackpole Electronics announces the release of the SM8035 4 watt molded SMD wirewound resistor. The robust wirewound element is able to withstand much higher surge energy than other film surge resistors. The SM8035, in a 1 ohm value for example, has the energy handling capacity of 43.3 Joules.
1st February 2013

Stackpole's Precision Thin Film Chip Resistor Arrays Offer Tolerances as Low as 0.1%

Stackpole's Precision Thin Film Chip Resistor Arrays Offer Tolerances as Low as 0.1%
The RAVN Series from Stackpole is a thin film based chip array designed for applications with tight tolerance or tight TCR requirements. The RAVN Series offers four resistive elements in a package measuring 1.6mm by 3.2mm with resistance values from 100 ohms up to 33K ohms in a 0.1% tolerance. This part can also achieve 10 ppm TCR for a limited resistance value range.
23rd January 2013


Stackpole’s RNCH Series for High Power and High Humidity Applications

Stackpole’s RNCH Series for High Power and High Humidity Applications
The RNCH is a high power version of Stackpole’s award winning RNCS series of anti-corrosive passivated nichrome thin film chip resistors. The RNCH offers the power rating of the RNCS0805 in the 0603 size and similar power upgrades for the 0805 and 1206 sizes.
8th November 2012

Stackpole’s RHC2512 for Power Applications Requiring Low Self Heating

Stackpole’s RHC2512 for Power Applications Requiring Low Self Heating
The RHC2512 is a two-watt thick film chip resistor which utilizes special materials, design, and processing to achieve low heat rise compared to other high power chip resistors. The RHC2512 has a hot spot temperature of just under 120C at 2 watts where most 2512 size chip resistors may reach that temperature at only 1 watt of applied power.
31st October 2012

Stackpole's Thick Film Sample Kits Provide all E96 Resistance Values Per Decade

Today, Stackpole announced the release of its new thick film sample kits. The sample kits feature Stackpole's RMCF Series general-purpose thick film chip resistors with 1% tolerance values. These thick film resistor kits feature 20 pieces of all E96 standard 1% resistor values per decade, totaling 1,920 pieces.
30th March 2012

Stackpole - High Voltage Resistor Series

Stackpole - High Voltage Resistor Series
Stackpole Electronics ASR / SPR Series metal film resistors are designed to withstand high voltage pulses. The pulse voltage capability ranges from 1KV for low resistance values in the ¼ watt size up to 10KV for higher resistance values in the mini ½ watt and 1 watt sizes. In addition, these resistors can withstand thousands of pulses of this type even up to several seconds in duration without significant resistance shift.
5th October 2010

Stackpole's Advanced ESD Solutions for USB Port Protection

Stackpole's Advanced ESD Solutions for USB Port Protection
Stackpole Electronics, Inc's discrete (ESD Series) and array (ESA Series) suppression devices are ideal for ESD protection of high speed communications ports such as USB 2.0. These products offer capacitance as low as 0.01pF, which preserves signal integrity even up to data rates approaching 5GHz. Like other gap type devices, the ESD and ESA have very low leakage current.
7th September 2010

Stackpole develops 1% tolerance chip resistors

Stackpole develops 1% tolerance chip resistors
Stackpole Electronics, Inc. announced the addition of 1% tolerance to the popular RPC Series of thick film high pulse withstanding chip resistors. Previously this series was only available down to 5% tolerance due to the elimination of the calibration laser trim. Through proprietary materials and processing, Stackpole is now able to offer 1% accuracy with only minor sacrifices to the pulse power handling of the product.
31st August 2010

Stackpole’s HVC Series High Voltage Resistors Offer ESD Withstanding Up To 40KV

Stackpole’s HVC Series High Voltage Resistors Offer ESD Withstanding Up To 40KV
The HVC Series thick film high voltage chip resistors from Stackpole are designed to operate and withstand extremely high voltages which would destroy other standard and medium voltage resistors. The high resistance values in the HVC Series in standard chip sizes of 1206 and larger are rated for voltage handling above 15KV, and the 3512 size chip can withstand up to 40KV transients. This means that even repetitive ESD surges of 15KV will not significantly affect the performance of these resistors. Standard and medium voltage chip resistors can have ESD perfomance that ranges from good to completely unacceptable at 3KV and 10KV levels. This is due to the wide range of laser calibration trimming necessary to achieve the required tolerances for these series. However the HVC Series utilizes a unique direct deposition onto the substrate, which allows for the highest resistance values and highest voltage handling with typically very little laser trim calibration needed.
17th August 2010

Stackpole’s Customizable SWT and EWT Series Tubular Wirewounds

Stackpole’s Customizable SWT and EWT Series Tubular Wirewounds
Stackpole’s SWT and EWT Series are high power tubular wirewounds that can be customized to fit many different applications. Along with the standard sizes, these two series can be provided with non-standard core sizes, adjustable center taps, non-inductive windings, different size mounting brackets, and different tab connectors. Many high power resistor applications require a resistor to fit into a fixed enclosure, housing, or space within another piece of equipment.
3rd August 2010

Stackpole Announces Release Of The MHL Series Aluminum Clad Wirewounds Rated Up To 1000 Watts

Stackpole Announces Release Of The MHL Series Aluminum Clad Wirewounds Rated Up To 1000 Watts
Stackpole announces the release of its aluminum housed low profile wirewounds, the MHL Series. Available in power ratings from 60 watts up to 1000 watts, this series offers a high power wirewound solution that is typically less than half the height of traditional aluminum housed wirewounds. This product has standard lead wire terminations coming out of one end, and can also be provided with leads coming out of opposite ends or with quick connect tabs. The element is cemented into the aluminum case which provides a flameproof part with outstanding stability that is resistant to moisture and other harsh environmental conditions.
27th July 2010


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Sensor+Test 2019
25th June 2019
Germany Nürnberg Messe
DSEI 2019
10th September 2019
United Kingdom EXCEL, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
Engineering Design Show 2019
16th October 2019
United Kingdom Ricoh Arena, Coventry
ELIV 2019
16th October 2019
Germany Bonn World Conference Center