Saelig, has announced diagnostic kits for Heavy-Duty vehicle and Off-Highway (HD-OH) equipment diagnosis, built around a dedicated PicoScope automotive oscilloscope.

Saelig Company has introduced the SIGLENT SDS2000X HD Series High-Resolution Digital Storage Oscilloscopes, which feature 2GSa/s 12-bit A/D converters with an extremely low 70uVrms noise floor front end to provide a signal analysis tool with over 16 times the resolution of ordinary 8-bit oscilloscopes.

The X2E XORAYA Z7, compact automotive data logger has four customisable interface modules to suit a range of automotive manufacturing, test, and development needs for logging multiple data streams simultaneously

The ISOVP probe is a novel voltage probe for power electronics and high voltage use, providing isolation via fiber optic cables. The probe was designed with minimal input capacitance to enable high frequency measurements.

OR-01 OhmRanger-LCV has been designed as a portable instrument for measuring the resistance of delicate components by using a very low stimulus voltage to avoid damaging the device being tested.

Saelig has introduced the Cambrionix ThunderSync3-C10 Charge/Sync Hub, a Thunderbolt-certified hub which features 10 x USB Type-C connectors and offers 3Amp (15W) charging and USB 3.2 Gen 1 data for each connected device.

20GSa/s UltraVision III architecture with 8-bit and 16-bit resolution combines oscilloscope, DVM, counter, realtime spectrum analyser, and protocol analyser capabilities.

The SGX1000 series of 3/6/18GHz RF Signal Generators from Saelig combines technology to provide high performance CW and swept signal generation

Saelig has announced the thinkRF H1000A RF Power Amplifier, a discrete, rugged, and portable RF amplifier designed for public safety and emergency communications that supports operation from a 12V vehicle power system or V-mount battery. 

Saelig has introduced the JRE TVK Isolation Tester, which can help to verify the proper shielding isolation of RF enclosure test set-ups. This test combination, consisting of the STA-1, a sensitive handheld spectrum analyser, and the HPSS-1, a high power 2.45GHz test signal source, can easily and quickly measure enclosure isolation down to less than -100dB.

Saelig has introduced the SDS1104X-U four-channel 100MHz oscilloscope, a lower priced, economy version of the SDS1104X-E. Many excellent features have been retained, including the large 7" TFT-LCD display and ergonomic front panel design, while economies have been made by removing the optional MSO and function generator upgrade capabilities.

Saelig, has announced that the Rigol RSA3000 and RSA5000 Real Time Spectrum Analyser series now includes five ‘N’ versions which offer vector network analysis up to 6.5GHz. Built on Rigol's Ultra Real platform, these VNAs offer S11 and S21 reflection and transmission analysis.

Saelig Company has introduced the compact ThinkRF D4000 RF Downconverter, designed to extend the usefulness of existing spectrum analysis equipment by down-converting RF signals from the 24 to 40GHz frequency bands down to an intermediate frequency (IF) of 1.536GHz with 100kHz tuning resolution.

Saelig has introduced the GWInstek GLC-9000 leakage current tester, which performs leakage current (also called touch current) tests on general purpose electric (IEC 60990) equipment. This tester uses nine measurement device networks to simulate the human body interacting with equipment under test.

Saelig Company has introduced the Boonton PMX40 40GHz RF Power Meter which combines the utility of traditional benchtop instrument, the flexibility and performance of modern USB RF power sensors, and the simplicity of a multi-touch display.

Saelig Company has announced theThinkRF RF Drive Test System - a complete, multiband, and versatile mobile testing solution - a complete drive testing solution with one single piece of equipment, providing spectrum capturing, technology analysis, and I/Q storage

Saelig Company has introduced the SFI High Attenuation Frameless Enclosures which guarantee more than -100dB attenuation RF/EMI in a quick-setup tabletop enclosure. The frameless design allows a smaller footprint, easier storage, and guarantees high attenuation than the RF/EMI Shielded Tabletop Enclosure. 

Saelig Company has introduced the 4-channel PicoScope 6000E Series 500MHz Oscilloscopes, which provide eight to 12 bits of vertical resolution, and up to 5GSa/s sampling rate with 4GSa memory, allowing these scopes to display single-shot pulses with 200ps time resolution.

Saelig has introduced the Siglent SSG5000X series RF Signal Generators which generate analogue and vector signals over a frequency range of 9kHz to 4GHz/6GHz with a 0.001Hz frequency setting resolution. They offer excellent performance in phase noise, spectral purity, bandwidth, EVM, and output power.

Saelig has announced a very small industrial embedded PC; the Amplicon Impact-P Series. These rugged PCs feature the Intel Apollo Lake ATOM E3900 generation processors, supported by high bandwidth DDR3L 1600MHz memory, in an ultra-compact (4.7x2.2x3.8") housing that is milled out of solid aluminum.