Rutronik Elektronische Bauelemente GmbH

  • Industriestrasse 2
    75228 Ispringen
  • +49 (0) 7231 / 801-0
  • +49 (0) 7231-82282

Rutronik Elektronische Bauelemente GmbH Articles

Displaying 1 - 20 of 312
6th February 2020
Current sensor suppresses interference fields

A coreless open loop current sensor for accurate and stable measurements in industrial applications is now being sampled by distributor Rutronik UK.

31st January 2020
How to drive BLDC motors effectively with MOSFET tech

Our increased use of electric motors, especially in the automotive and industrial sectors, means that they are now a very large consumer of energy worldwide. BLDC (brushless FDC) motor technology is coming to the fore to improve reliability and efficiency, and MOSFET technology is providing an efficient drive solution. Mirko Vogelmann, Product Sales Manager Power Semiconductors, Rutronik explains.

23rd January 2020
Module covers multiple wireless protocols

Based on the SoC (System-on-Chip) nRF52840, Nordic’s most powerful short-range wireless microcontroller, Minew’s new MS88SF2 multi-protocol module can be operated with the wireless protocols Bluetooth 5.0, ZigBee 3.0, Thread and ANT, as well as with proprietary 2.4GHz stacks.

Events News
16th January 2020
Rutronik plans Bluetooth, IoT demos at embedded world

How to take advantage of the latest Bluetooth, IoT, 5G and display technologies will be demonstrated at embedded world in Nuremberg (25-27 February 2020). Visitors to booth 467 in Hall 5 will see the latest solutions from RUTRONIK EMBEDDED, including system concepts ranging from connected sensor nodes and gateways to customer-specific display customisations.

5th December 2019
Bluetooth RF module supports ten BLE connections

The HCI (Host Controlled Interface) Bluetooth RF module PAN1326C2 from Panasonic is based on Texas Instruments’ CC2564C dual-mode Bluetooth controller that combines Bluetooth Basic Rate (BR), Enhanced Data Rate (EDR) and Low Energy (LE).

26th November 2019
Why devices with position tracking require an internet connection

In a few months the European satellite system Galileo will be completed. Most devices with location tracking functions already support it. Even so, their manufacturers should endeavour to implement over-the-air access, as this is the only way that satellite selection can be adjusted on demand as needed – something which can be a critical factor, writes Bernd Hantsche, Director Product Marketing Embedded & Wireless at Rutronik.

6th November 2019
Transceiver module boasts energy efficiency

The compact wireless transceiver module TCM 515 from EnOcean offers reduced power consumption, smaller size and a lower purchase price compared to the previous generation TCM 310. It is now available at distributor Rutronik UK.

1st November 2019
Energy-efficient module enables fast implementation of LTE

The ME910G1 enriches the Telit xE910 product family with a high-performance LTE-M and NB-IoT combo module. With optimised power consumption and enhanced quality of coverage it is specifically tailored for low-data throughput IoT applications and enables new low-cost IoT device deployments

24th October 2019
LTE data card reaches up to 1.2Gbps download

The LM960A18 Mini PCIe (mPCIe) data card from Telit delivers high-speed data rates via Advanced LTE for products in network appliance environments such as routers, mobile gateways and access points. It is available at Rutronik UK.

16th October 2019
Sensor prototyping kit suits IoT applications

The multi-sensor IoT prototyping kit Nordic Thingy:91 from Nordic Semiconductor is now available at Rutronik UK. Designed for IoT applications based on the nRF9160 SiP (System-in-Package), the new kit features the nRF52840 for short-range radio connection and a broad collection of sensors and interfaces, which makes it highly versatile and enables rapid prototyping and proof of concept.

9th October 2019
Power MOSFETs help cut system costs

Infineon OptiMOS 3 and 5 best-in-class (BiC) power MOSFETs in space-saving SuperSO8 package are available at Rutronik UK. They enable higher power density in addition to improved robustness compared to former models, and reduce system costs while increasing overall performance.

2nd October 2019
High-voltage MOSFETs offer enhanced PFC

The STMicroelectronics MDmesh M6 high-voltage super-junction MOSFETs offer improved PFC (Power Factor Correction) and LLC efficiency especially at light load conditions for increased power density. They are available at Rutronik UK.

3rd September 2019
DC/DC converters allow pcb layout flexibility

Modular 2W DC/DC converters with complete medical certification are included in RECOM’s REM2 series. Thanks to their compact SIP8 package (23.0x8.0x12.2mm) and many variants, they offer developers freedom in designing their PCB layout.

28th August 2019
Wireless SoCs enable design flexibility for IoT

Ultra-low power multi-protocol wireless SoCs and modules of Redpine Signals’ RS9116 family are available from Rutronik UK in hosted (nLink) or embedded (WiSeConnect) software architecture with multiple host interfaces (SDIO, USB, SPI, UART). As a result, they provide great design flexibility for battery operated IoT devices.

27th August 2019
Why do devices with position tracking require an internet connection?

In a few months the European satellite system Galileo will be completed. Most devices with location tracking functions already support it. Even so, their manufacturers should endeavour to implement over-the-air access, as this is the only way that satellite selection can be adjusted on demand as needed – something which can be a critical factor.  By Bernd Hantsche, Director Product Marketing Embedded & Wireless at Rutronik Elektro...

20th August 2019
Ultra-low-power IMU extends system battery life

The smart Inertial Measurement Unit (IMU) BMI270 from Bosch Sensortec scores with increased system battery life and an improved accelerometer. Optimised for wearable and hearable applications, the BMI270 is available from Rutronik UK.

14th August 2019
Wireless MCUs are based on secure-zone architecture

Wireless Secure MCUs featuring a comprehensive multi-protocol wireless sub-system are available at Rutronik UK. Redpine Signals’ RS14100 WiSeMCU family of SoCs and modules feature voice activity detection (VAD) and up to eight inputs for capacitive touch sensors.

6th August 2019
DC/DC converters deliver where board space is tight

The DC/DC converter series REC15E-Z from RECOM comprises fully specified 15W devices with wide input voltage ranges. It is available from Rutronik UK.The converters increase flexibility by accepting several standard bus voltages.

30th July 2019
Development kit supports both LTE standards

The nRF9160 Development Kit from Nordic Semiconductor is a cost-effective hardware development platform providing all necessary tools for evaluation and development of application firmware based on the nRF9160 SiP (System-in-Package).

11th June 2019
Slimline position sensor lowers production costs

The PST-360 from PIHER, now available from Rutronik UK, is a slimline, 12 mm height, package solution sensor mounted directly into the shaft, with no gears. Completely contactless, the position sensor provides excellent repeatability, accuracy, resolution, linearity and high stability even under harsh environmental conditions.

First Previous Page 1 of 16 Next Last

Featured products

Upcoming Events

View all events
Latest global electronics news