RECOM Electronic GmbH & Co. KG
- Carl-Ulrich-Straße 4
Neu-Isenburg
63263
Germany - +49 (6102) 88381-0
- https://www.recom-power.com/emea/home.html
- +49 (6102) 88381-61
RECOM Electronic GmbH & Co. KG Articles
DIN-rail power supplies deliver up to 50% above rated power
A range of DIN-rail power supplies available from Dengrove Electronic Components can deliver up to 50% above rated power, which enables equipment to operate continuously during short-term overloads avoiding disruptive shutdown-reset, and allows designers to satisfy high system-demand peaks using smaller, lower-cost power supplies.
Fully automated DC/DC converters have a low profile
RECOM claims that its new R1SX series have nearly 20% lower profile than the industry standard due to their inverted transformer design. These 1W DC/DC converters are suited for bus isolation and a wide range of industrial automation control equipment. The R1SX series, an open-frame SMD converter, leverages on the fully automated manufacturing techniques to deliver stable performance and consistent high-quality at a competitive price.
Power supply designed for limited airflow applications
Designed for high power-density in applications which operate with limited airflow, RECOM has released the RECOM RAC150-G series of switched-mode power supplies. Under natural convection, the SMPS modules provide 125W from a compact 4x2" open-frame design and even up to 122W in an aluminium case; under forced air cooling, a constant output of up to 150W is achieved.
2A switching regulator can reach efficiencies up to 96%
RECOM has expanded its R-78B series with a new 2A on-board power supply. These switching regulators can reach efficiencies up to 96%, without heat sinks. The R-78Bxx-2.0 series provides a high power density of up to 17.5W per cm³ in a SIP3 housing measuring only 11.5 x 8.5 x 17.5 mm. The R-78Bxx-2.0 series switching regulators are ideally suited to replace 78xx linear regulators and are also pin compatible with linear regulators in TO-2...
DC/DC book of knowledge now contains magnetics chapter
The new edition of the RECOM DC/DC Book of Knowledge has been released, with an additional chapter on magnetics. In the first few weeks, more than 1,000 online copies have been downloaded by engineers worldwide. This shows how valuable this source of in-depth practical power design information is to the power supply community.
DC/DC converters have built-in EMI filter
RECOM's new DC/DC converters REC3A, REC5A and REC6A have a built-in EMI filter to meet EN55022, class A. Class B can be achieved easily with a small capacitor. The compact DIP24 modules (31.8x20.3x10.2mm) with 2:1 input (4.5-9VDC; 18-36VDC) provide a regulated 5VDC output and can be operated zero percent minimum load. They are short-circuit and overload protected and are available with an optional integrated under voltage lockout.
Switching regulator provides low standby consumption
Specially designed for single-cell powered IoT application, RECOM announce boost R-78S switching regulators. Due to their wide input voltage range, high efficiency and low stand-by losses, they extend not only the working lifetime of the cell, but also maintain a stable 3.3V output down to 'the last gasp' battery voltage.
DC/DC converters meets railway technology
The trend throughout the electronics industry towards ever higher packing densities has left its mark on DC/DC converters, as Recom introduces models with 20 to 120W output
DC/DC converters occupy less than 1/3 square inch
The new 2W RTC2 series modules from Recom come in a six-pin, SMD, open-frame package with a footprint of less than 1/3 of a square inch.
Switching regulators to supply microprocessors
The RECOM R420-1.8/PL switching regulators has been developed specifically for supplying microprocessors from 4-20mA loop. Characteristics of the flat module include extremely low idle power along with high efficiency.
Regulated 6W DC/DC converters with high power density
RECOM new regulated 6 W DC/DC converter, RS6 series is developed specifically for applications with high-power density in extremely compact installation space; the series supply 2.7W per cm³, and will operate at full load even at extreme temperature range from -40°C to +75°C.
DIN-rail power supplies offer 120 & 240W power output
A DIN-rail power supply series rated at 120 and 240W has been added to RECOM's existing range. The power supplies support brief peaks of 50% above rating, and the modules can be connected in parallel to increase the output power available or for redundancy. The two versions operate at input voltages ranging from 85-264VAC for worldwide usage, and are equipped with an active PFC circuit for a power factor greater than 0.95.
DC/DC converters span 8.0 to 240W for transport use
DC/DC converters designed for the railway industry make up the industry’s broadest portfolio of EN50155 certified products available on the market, says Recom. The company’s railway portfolio includes DC/DC converters from 8.0 to 240W. Recent additions to the company’s range are the RPA20-AW, RPA30-AW, RPA60-FW, RP20-FR, and RP40-FR.
Flat LED drivers useful for furniture and cabinet lighting
A family of flat constant-current and constant-voltage LED drivers has been released by RECOM. These are suitable for standalone LED luminaires where space – especially height – is at a minimum. At 11 and 13mm high, these LED drivers can be used in concealed installation applications such as in furniture, unobtrusive mounting in shelving units, behind glass panels or mirrors.
Medical-grade power supplies offer convection cooling
A series of medical-grade AC/DC power supplies offer full performance at elevated ambient temperature levels, for example in enclosures where forced cooling is not possible because of hygiene, safety, contamination or acoustic noise. RECOM’s RACM series contains 40, 65 and 100W modules which offer continuous output power with free air convection cooling.
AC/DC converters for harsh industrial environments
The RAC20-N from RECOM is an AC/DC converter in modular design for mounting onto PCBs. The compact 2x1 inch casing is ideal for use in harsh industrial environments. The AC/DC converter is equipped with a universal input for 90–264V AC, and is pin-compatible with RAC05-SC, RAC06-SC, RAC10-SC and RAC20-SB models for an easy power upgrade or reduced-cost version without other alterations to the PCB.
Compact LED drivers suit integrated lighting
DC current and DC voltage LED drivers from Recom can be built into furniture, hidden under shelving, or integrated into applications with limited space constraints.
DC/DC converters have EN and UL certification for railways
For use in rolling stock, as well as industrial applications, the RP40-FR DC/DC converter series has been released by Recom.
Power supplies to power smart building infrastructure 24/7
Intelligently networked smart homes and smart offices often require control systems with many low power nodes, actuators and sensors that are 'always on'. RECOM’s robust and reliable 2 and 3W AC/DC power supplies are specially designed to power smart building infrastructure 24/7 by offering compact sizes for easy installation, very low standby power consumption (35mW) and full household (IEC/EN60335), CE (LVD+EMC+RoHS2) and industrial safet...
Regulated 10W DC/DC converters offer wide input range
Designed for applications where wide input range and accurate regulation are key factors, the RP10-A and RP10-AW series DC/DC converters have been unveiled by RECOM. Typical applications for the converters include battery-powered systems, instrumentation, or distributed power architectures in telecomms or industrial electronics.