Powersolve

Address:
Unit 8A
Arnhem Road
Newbury
Berks
RG14 5RU
United Kingdom

Phone: +44 (0)1635 521858

Fax: +44 (0) 1635 523771

Web: www.powersolve.co.uk

Powersolve Electronics Ltd. was established in 1987 by a group of experienced power supply specialists who had had many years previous experience in the world wide power supply industry. The company was set up to provide a very wide range of standard products, not only of the highest quality, but also at competitive prices and variants and custom power supplies when the need arises.


Powersolve articles

Displaying 1 - 20 of 178

Pure sine wave output DC-AC inverters

Pure sine wave output DC-AC inverters
Powersolve just announced its PS series of 1000 to 5000VA DC-AC inverters. These are low cost, pure sine wave output DC-AC inverters available from Powersolve with inputs of either 12V, 24V or 48VDC. Customers can order an AC output of either 220VAC or 230VAC at 50Hz or 60Hz.
31st October 2017

Plug-Top power adaptors meet the latest CEC requirements

Powersolve's PPS60 Series of plug-top adaptors is designed to accept a universal 90 to 264VAC input while providing single outputs from 12 to 24VDC. The three models in the PPS60 Series meet the latest CEC Requirements – Level VI and feature a no-load input power figure of just 0.21W max.
19th October 2017

Compact single output 300W power supplies

Compact single output 300W power supplies
A series of compact, single output AC-DC converters designed to provide up to 300W across a wide operating temperature range of -30⁰ to +85⁰C has just been announced by Powersolve. The seven model PSY300 series power supplies are open PCB units with a 3 x 5in footprint. They operate from a wide 90 to 264VAC input range with active PFC.
1st September 2017


Rugged power supplies are rated to IP67 and NEMA 4X

Rugged power supplies are rated to IP67 and NEMA 4X
Powersolve has just announced the TEX 120 series of industrial power supplies designed for a wide variety of applications in harsh environments. Providing a maximum output of 120W, the unit’s rugged die-cast aluminium housing is water, oil, ice and dust resistant and is approved to IP67 and NEMA 4X requirements. An International safety approval package also includes CB scheme as well as ATEX and IECEx.
21st August 2017

Single output power supplies can give up to 400V

Single output power supplies can give up to 400V
Powersolve has just announced a series of high voltage AC-DC, single output power supplies that can provide up to 3000W with output voltages from 150V to 400V. There are five models in the PEK3000HV series all of which feature a full 90-264VAC input range with active PFC and forced current sharing for parallel operation. All five Models in the PEK3000HV series offer single outputs programmable between 0% and 105%.
9th August 2017

AC/DC inverters provide up to 4500VA

AC/DC inverters provide up to 4500VA
Power supply specialist Powersolve announces its PJN series of AC/DC sine wave inverters which provide between 1000VA and 4500VA from a DC input between 40 to 60VDC. They also take 230VAC mains input enabling them to operate in a UPS mode and switch over to 48VDC batteries automatically when the incoming mains fails. This make the PJN Series suitable for telecoms systems that use a 230VAC input supply and 48VDC battery back-up.
2nd August 2017

“Green” UPS series provides up to 3kVA

 “Green” UPS series provides up to 3kVA
Powersolve has added to its uninterruptible power supply offering with the launch of the six model PKR Plus Series. Designed to satisfy a wide range of applications including telecoms, LANs, servers, E-business and security systems, the PKR Plus Series provides constant and reliable power in the event of mains supply failure.
12th July 2017

DC/AC inverters with battery charger and UPS function

DC/AC inverters with battery charger and UPS function
Powersolve has just announced the EPS series of DC/AC inverters. These are  low cost DC and AC input sine wave inverters featuring an integral battery charger for UPS function. DC input options available are 12V, 24V and 48V. AC input is 175-264VAC and AC output can be ordered set to either 220 or 230VAC.
3rd July 2017

DC-AC inverters with battery charger and UPS function

DC-AC inverters with battery charger and UPS function
Powersolve has just announced its EPS series of DC/AC inverters which are a low cost DC and AC input sine wave inverter featuring an integral battery charger for UPS function. DC input options available are 12V, 24V and 48V. AC input is 175-264VAC and AC output can be ordered set to either 220 or 230VAC.
25th June 2017

Low-cost AC inrush current limiter

Low-cost AC inrush current limiter
Powersolve's ESB-101 is a low-cost peak inrush current limiter designed for capacitive loads in a variety of applications across automation systems and machinery. The ESB-101 is available in either 115VAC or 230VAC versions and limits power-up currents and provides continuous operation up to 16A.
6th April 2017

Desk-Top back up battery unit powers hubs and routers

Desk-Top back up battery unit powers hubs and routers
Powersolve just introduced desk-top “mini” uninterruptible power supplies (UPS) that provide back-up power in the event of an AC mains failure. The compact PUPS22 & PUPS44 UPS’s works from a 12VDC input using any approved 12V AC-DC plug-top charger capable of powering the load and with enough output power to charge the internal batteries. 
22nd February 2017

DC/AC inverters provide up to 4500VA and feature ECO mode

DC/AC inverters provide up to 4500VA and feature ECO mode
A series of sine wave DC/AC inverters that provides between 1000 and 4500VA from a DC input between 40 to 60VDC has just been made available by Powersolve. They are ideal for 48VDC – based telecoms systems and meet all relevant safety and EMC standards.
15th February 2017

Power supplies for harsh environments

Power supplies  for harsh environments
Powersolve has just announced encapsulated AC-DC switch mode power supplies designed specifically for harsh environments. Typically these will include Security, CCTV and LED installations. For maximum applications flexibility, all units can be wall or chassis mounted and can be supplied with a wide variety of input and output cable lengths and connectors to suit the customer’s specific requirements.
7th February 2017

12 and 24V Lead Acid battery chargers from Powersolve

12 and 24V Lead Acid battery chargers from Powersolve
Just Announced by Powersolve is the PIN Series of CE marked, 3 stage 12 and 24V Lead Acid battery chargers conveniently packaged in a compact desk-top enclosure (153 x 60 x 36.5mm).
4th November 2016

Fully encapsulated DC/DC converter modules

Fully encapsulated DC/DC converter modules
The TMDC series is a range of fully encapsulated low profile DC/DC-converter modules just made available by Powersolve. The modules feature ultra-wide input voltage ranges of 9 to 36VDC and 18 to 75VDC and are available with fixed 5.1, 12, 24 and 48 VDC output voltages in 20, 40 or 60W ranges.
27th October 2016

Powersolve's NiMH/NiCD smart charger auto detects cells

Powersolve's NiMH/NiCD smart charger auto detects cells
A smart charger for NiMH and NiCD batteries from Powersolve will auto detect and charge 8 to 15 cells in series and charge them at the correct voltage between 9.6V and 18VDC. The PSCH30 charger operates from a universal 90 to 264VAC and incorporates several safety features including automatic cut-off when the cells are fully charged and battery over-temperature protection using a thermal sensor. 
11th October 2016

DC/DC car adaptor provides up to 60W

DC/DC car adaptor provides up to 60W
A DC/DC car adaptor from Powersolve provides up to 60W output power with output voltages from 12 to 24VDC. Housed in a fully sealed plastic case, the CE marked Powersolve VDN60 plugs into a standard car cigarette socket to provide users with enough power to charge and run all types of electronic products.
28th September 2016

DC/DC converters provide 9W from a SIP-8 package

DC/DC converters provide 9W from a SIP-8 package
Powersolve has just introduced what its says is the world’s first SIP-8 packaged DC/DC converter series to provide an isolated and regulated output voltage with up to 9W of output power. Models in the Tracopower TMR9 series are available with 2:1 (TMR 9) or 4:1 (TMR 9WI) input ranges and cover nominal inputs of 12, 24 and 48VDC. Single and dual output voltages of 3.3 to 24VDC are available within the range.
7th September 2016

24-60W AC/DC power supplies suit medical applications

24-60W AC/DC power supplies suit medical applications
The TMM series of fully encapsulated 24 to 60W AC/DC power supply modules, available from Powersolve, have been designed specifically for medical applications although their EMI/EMC characteristics and safety approval package combine to make the modules suitable for demanding applications in industrial and transportation systems.
9th June 2016

Non-Isolated DC/DC switching regulators

Non-Isolated DC/DC switching regulators
  Powersolve's PSR30 and PSR60 series of DC/DC switching regulators are designed for battery or distributed power applications. Available from stock the PSR30/60 series features non-isolated outputs of up to 60W with efficiencies as high as 96%.
22nd April 2016


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Medical Japan 2018
21st February 2018
Japan INTEX Osaka
Mobile World Congress 2018
26th February 2018
Spain Barcelona
embedded world 2018
27th February 2018
Germany Nuremberg
Industry 4.0 Summit 2018
28th February 2018
United Kingdom Manchester
Factories of the Future Expo 2018
28th February 2018
United Kingdom Manchester