Murata Power Solutions Inc
- Power Electronics Division
11 Cabot Boulevard
United States of America
- 1 508 339 3000
- 1 508 339 6356
Murata Power Solutions Inc Articles
DC/DC Converters with 4:1 input deliver 18A/60W regulated 3.3V output in 1.6in. x 2in. package
Murata Power Solutions has introduced its new UEI-series of isolated, wide-range DC/DC Converters that deliver industry leading 50-60W of power output from a standard 40.6 x 50.8 x 10.16mm (1.6in. x 2in. x 0.4in.) PCB mounted, open frame package; plastic cased versions are available upon request.
Isolated, high efficiency DC/DC converter series gives ultra-high performance in a small package
Murata Power Solutions has added a new series of cost-effective eighth-brick DC/DC Converters to its existing range of brick converter products. The fully isolated (2250VDC) UCE series is available with fixed output voltages from 1.5V to 12V, output current to 40A and output power up to 100W.
Databook details industry’s DC/DC converters from Murata Power Solutions
Murata Power Solutions has introduced its new DC/DC converter databook. The 36-page colour catalogue provides technical data on the company’s extensive offering of isolated, point-of-load (POL), bus converter, processor support and memory support DC/DC converters.
POLA DC/DC Power Converters from Murata
Murata Power Solutions has launched a range of adjustable, non-isolated, Point-of-Load-Alliance (POLA) DC/DC Converters. The MPDTH series is available in a choice of 6A, 10A and 15A current ratings with nominal input voltages of 3.3VDC, 5VDC or 12VDC for each.
80A voltage regulator module from Murata
Murata Power Solutions has added a new model to its VR110 Series of single inline packaged (SIP) voltage regulator modules (VRMs) to address applications where component height is restricted. The VR110B080CA-1C is housed in a package that achieves an industry-leading installed height of just 0.807in. (module height is 0.782in.).
DC/DC Converters from Murata Power Solutions
Murata Power Solutions has introduced a new range of isolated 2W single output DC/DC Converters that deliver class-leading performance. The eight models in the NMG series are housed in small footprint (19.5mm x 7.5mm x 10.0mm high), industry-standard SIP packages that allow easy drop-in replacement of other devices. The new DC/DC Converters also provide a pin compatible power upgrade path from Murata Power Solutions’ 1W NMR series.
Rob Hill elected to Board of Directors of Power Sources Manufacturers Association (PSMA)
Murata Power Solutions’ Rob Hill has been elected to the Board of Directors of the Power Sources Manufacturers Association (PSMA). Rob has over 16 years experience in the power industry gained in a number of roles of increasing responsibility. He currently has a dual role at Murata Power Solutions as Vice President – Global Product Development, and Business Unit Lead for the Mansfield based Board Mount Power Product Range
Product Change Notification tool from Murata Power Solutions keeps customers up to date
Murata Power Solutions has announced that a new Product Change Notification (PCN) tool will be made available for customers of its DATEL DC/DC converter and Panel Meter products. Murata Power Solutions will implement phase one of the PCN program which will give customers the opportunity to register to receive PCNs and Product Discontinuation Notices / End of Life (EOL) notices.
Self-Contained true-RMS Ammeters provide compact and easy-to-use solution for measurement of non-sinusoidal AC currents
Murata Power Solution’s new Datel ACA-20RM series are the world’s first true-RMS responding digital AC ammeters with built-in current transformers (CTs). They are able to provide direct measurement of the true-RMS values of complex, non-sinusoidal AC currents of between 2A and 50A. Ideal for use in the latest computer and telecoms equipment, the compact, self-powered, single-board modules feature a large, easy-to-read LED display and provide ...
Inductive components for use in a wide range of power and EMC filtering applications
Murata Power Solutions has added ten new families of inductive components to its existing portfolio. The new introductions amount to well over 100 new part numbers and enable Murata Power Solutions to further enhance their comprehensive offering of wound ferrite magnetics for use in a wide range of power and EMC filtering applications.
New appointment strengthens distribution channel across EMEA
Murata Power Solutions has strengthened its sales team with the appointment of Andreas Hanausek as Distribution Account Manager, EMEA. Andreas will work closely with the company’s distribution partners across the region to support new and existing customer requirements.
Isolated 2W single output DC/DC Converter from Murata Power Solutions
The NMK series of isolated 2W single output DC/DC converters from Murata Power Solutions provides industry leading performance in a small footprint, pin compatible, industry standard SIP package that allows easy drop-in replacement of other devices. The NMK series also provides a straightforward power upgrade path from Murata Power Solutions’ existing 1W NMV series.
Current sense transformers designed for latest applications in high frequency equipment
Murata Power Solutions has introduced three new ranges of surface-mount current sense transformers. The 5300, 5400 and 5500 series can be used to measure or monitor AC currents in high frequency applications such as switched-mode power supplies, motor controllers, and electronic lighting ballasts. All three series are RoHS compliant, feature UL94 V-0 package materials, have a frequency range of 50kHz to 500kHz and comply with the J-STD-020C stand...
DC/DC converters support DDR Memory applications
Murata Power Solutions has introduced two new small form-factor point-of-load (POL) DC/DC Converters that deliver high-efficiency and high current density for powering DDR1, DDR2 and DDR3 memory, as well as general purpose ICs in multiple applications.
Murata names John Wanes Business Lead for Power Supply Business Unit
Murata Power Solutions, formerly known as C&D Technologies Power Electronics Division, has decided to combine its product development and marketing teams under a single management line. This has resulted in the appointment of John Wanes as the Business Lead for AC/DC Products designed at its Toronto location and build-to-print services supported by the business unit.
Murata Power Solutions names Rob Hill Business Lead for Mansfield, Massachusetts operations
Murata Power Solutions, formerly known as C&D Technologies Power Electronics Division, has decided to combine its Mansfield operation’s product development and marketing teams under a single management line. This has resulted in the appointment of Rob Hill as the Business Lead for the Mansfield product lines which include DC-DC converters, AC-DC power supplies, Point of Load Converters, Voltage Regulator Modules (VRMs) Data Acquisition Hybrids,...
Transformers approved for use with Analog Devices high speed transceivers
Murata Power Solutions (formerly C&D Technologies’ Power Electronics Division) has announced a new series of transformers that simplify implementation of isolated RS-485 and RS-422 interfaces based on Analog Devices chipsets by eliminating the need to select, compare and test alternative solutions.
Step-Down Switching Regulators from Murata provide high-efficiency
Murata Power Solutions’ (formerly known as C&D’s Power Electronic division) new 78SR Series 2A switching regulators provide high operating efficiency for applications requiring 3.3V or 5V outputs, at 2 Amps or less, from 8 to 32V inputs. At a nominal 12V input, full-load efficiencies approach 96% for 5V models, and 93% for 3.3V models.