MTM Power GmbH

Address:
Zirkel 3
Schwarzatal
98744
Germany

Phone: +49 69 1 54 26-0

Fax: +49 69 1 54 26 20

Web: www.mtm-power.com


MTM Power GmbH articles

Displaying 1 - 20 of 45

Switching power supplies for industrial applications

Switching power supplies for industrial applications
With the PCMAT100 S24, MTM Power introduces a new generation of AC/DC modules which can be installed as a decentralised power supply for industrial applications. As industrial compact power supply with wide input range (90 to 264VAC), the 100W module is designed for direct connection to the main power supply network and certified in acc. to DIN EN 62 368-1 / UL 62 368.
23rd May 2019

DC/DC converters with 400W to be showcased at InnoTrans 2018

DC/DC converters with 400W to be showcased at InnoTrans 2018
For years, MTM Power's series PCMD400 has been a well-proven converter series, especially designed for applications in vehicle and railway technology as well as in rugged industrial markets. With a complete redesign of this series MTM Power provides for the frist time– with the new PCMDS400 series – converters using state-of-the-art technology, which at the same time fulfil all applicable standards for the different applications in Berlin (Hall 17, Booth 207) at the InnoTrans 2018.
17th August 2018

DC/DC converters with 14W designed for railway applications

DC/DC converters with 14W designed for railway applications
The DC/DC converters of the series PMGS/PCMGS14 from MTM Power have been designed for transport and railway applications where low-ranged power is needed. The devices operate at a nominal input voltage of 72VDC or 110VDC and supply an output voltage of 24VDC (12VDC and 48VDC on request) with a high efficiency of more than 90%.
13th April 2018


DIN-rail power supplies for harsh industrial environments

DIN-rail power supplies for harsh industrial environments
MTM Power has announced the MTM Power DIN-rail module HSA50. It has been designed as a universal compact power supply with AC- (90-264VAC) and DC (120-340VDC) wide input range for the use under rough environmental conditions. The modules are available with the single outputs of 12, 24 and 48V. The ambient temperature range is -25 to 70°C and the dimensions are 42x115x75mm. They comply with protection class II, the Low Voltage Directive as well as the up-to-date EN standards as regards CE conformity.
9th March 2018

DC/DC converters designed for vehicle and rail applications

DC/DC converters designed for vehicle and rail applications
Specially designed for applications in vehicle and rail technology, MTM Power has introduced the primary switched DC/DC converters PCMDS150WK-IP65, which are also for use in industrial and telecommunication applications. The push-pull topology used while developing these converters enables a wide input voltage range with high efficiency. Thus the 150W converters are available with a wide input range for battery voltages of 24, 36, 48, 60, 72, 80, 96 and 110V.
31st January 2018

AC/DC power supplies use base plate cooling for decentralised power

AC/DC power supplies use base plate cooling for decentralised power
  Modules that can be installed as a decentralised power supply for industrial applications have been announced by MTM Power.
17th November 2017

DC/DC converter offers 6kV isolation voltage

DC/DC converter offers 6kV isolation voltage
Individual power supplies company, MTM Power, has announced a range of standard industrial converters in a DIL 24 case with an output power of 5-6W and an isolation voltage of 6.0kV. Besides their compact design the PMD5UD-6kV converters are characterised by a 4:1 ultra-wide input range.
26th October 2017

DC/DC converters with 60W support railway applications

DC/DC converters with 60W support railway applications
MTM Power has designed the DC/DC converters series PCMDS60W especially for applications in rail and vehicle technology but also for use in industrial and telecommunication applications. Without any additional external components the PCMDS60 meet all functional and normative requirements of electronic equipment in railway applications acc. to EN 50 155, EN 50 121-3-2, EN 61 373 Cat. 1, Cl. B.
7th August 2017

Primary switched DIN rail modules offer efficiency in low-power applications

Primary switched DIN rail modules offer efficiency in low-power applications
MTM Power GmbH has announced the HSD series of primary switched DIN rail modules with DC input voltage. The devices offer an input voltage range of 20-72VDC and allow efficient solutions for different applications where low power is needed. Due to the thermoselective vacuum encapsulation (EP 1 987 708, U.S. Patent No. 8,821,778 B2) the devices offer a best possible protection against dust and humidity and are especially robust against mechanical stresses like shock and vibration.
25th May 2017

DC/DC converters function as decentralised power supplies in vehicles

DC/DC converters function as decentralised power supplies in vehicles
MTM Power's PCMDS80 series of DC/DC converters are specially designed as decentralised power supplies in vehicles and for supplying closed sub-systems in rolling stock applications. They are available with three wide input ranges thus enables the use of the converters on batteries with 24 to 100VACC. EN 50 155. The converters are also suitable for use in industrial and telecommunication applications.
9th May 2017

Power modules feature 300mW stand-by consumption

Power modules feature 300mW stand-by consumption
MTM Power GmbH has developed the PMAS10 Print Power module series with low power consumption in unswitched position. The reduced stand-by power consumption of series PMAS10 is way below 1W, typically around 300mW. The Print Power modules are designed as universal compact power supplies with AC and DC wide input ranges and single output power of 5, 12, 15 and 24V for worldwide application.
8th March 2017

DC/DC converters designed for automotive applications

DC/DC converters designed for automotive applications
A range of primary switched DC/DC converters with 400W output power has been released by MTM Power, especially designed for automotive applications. They operate according to the push-pull principle; i. e. the input DC voltage is chopped by two push-pull working transistors with a frequency of approximately 60kHz. 
23rd January 2017

AC/DC modules ensure reliable operation

AC/DC modules ensure reliable operation
With the series PMAT/PCMAT60, MTM Power expands its program with the third generation of AC/DC modules for reliable supply of electrical and electronic systems. The 60W module is electrically and mechanically compatible to the PMAS/PCMAS48 series and thus offers 25% more output power in the same case. The typical efficiency is up to 89%.
4th January 2017

150W AC/DC power supplies feature base plate cooling

150W AC/DC power supplies feature base plate cooling
MTM Power has introduced the PCMAT150 S24 Series, a new generation of AC/DC modules which can be installed as a decentralised power supply for industrial applications. From wide AC/DC (85-264 VAC) and DC/DC (100-300 VDC) input ranges, a 24VDC output voltage is generated. The contact-cooled devices are ruggedly designed and have a power good signal as well as an active PFC.
7th December 2016

300W DC/DC converters feature base plate cooling

300W DC/DC converters feature base plate cooling
MTM Power introduces the PCMDNI300 series, a new generation of DC/DC converters without galvanic isolation, which can be installed as decentralised power supplies in vehicles and for supplying closed sub-systems in rolling stock. The wide input voltage range of 28-154 VDC enables the use of the converters on batteries with 36 to 100V. The devices can be operated from -40 to +70°C without derating and have an excellent efficiency of up to 95%.
15th September 2016

200W primary switched modules offer IP67 compliance

200W primary switched modules offer IP67 compliance
MTM Power has announced a series of primary switched modules, the PM-IP67A200 series, featuring IP67 ingress protection. The modules are especially designed for the electric supply of control, sensor and actuating systems in the field directly at the application. In order to achieve protection degree IP67 for conventional power supplies, it has been necessary to install them into switching cabinets or corresponding enclosures.
25th July 2016

MTM Power successfully re-audited to DIN EN ISO 9001:2008 standard

MTM Power always wants to meet the market's growing demand for top quality and durable products. The company was certified in 1998 according to the international Quality Management System ISO 9001.
17th June 2016

Primary switched AC/DC power modules suit worldwide use

Primary switched AC/DC power modules suit worldwide use
MTM Power's PMAS15 and PCMAS15 series of primary switched AC/DC power modules have been designed as universal compact power supplies with AC/DC wide input ranges (90-264 VAC, 100-300 VDC) for worldwide application. They are available with single output voltages of 5, 12, 15, 24 and 48VDC. The series offers 15W constant output wattage, is short circuit protected, needs no ground load and features reduced stand-by power.
2nd June 2016

Primary switched DC/DC converters suit railway vehicles

Primary switched DC/DC converters suit railway vehicles
MTM Power's PMDS/PCMDS30 series of primary switched DC/DC converters has been especially designed as a decentralised power supply for railway vehicles and industrial applications. These converters operate according to the current source push-pull principle and work with a frequency of 70/140kHz.
24th May 2016

DC/DC converter functions as decentralised power supply

DC/DC converter functions as decentralised power supply
Based on the well-established 150W converter series PCMDS150 for railway and industrial applications, MTM Power has designed the PCMDS150 350S24 DC/DC converter especially for generating control voltages from high voltage energy storages.
12th May 2016


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Girls in Tech | Catalyst | 2019
4th September 2019
United Kingdom The Brewery, London
DSEI 2019
10th September 2019
United Kingdom EXCEL, London
EMO Hannover 2019
16th September 2019
Germany Hannover
Women in Tech Festival 2019
17th September 2019
United Kingdom The Brewery, London
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris