Mouser Electronics is sponsoring the 2017 ST Developers Conference, September 6, 2017, in the Mission City Ballroom of the Santa Clara Convention Center in Santa Clara, Calif. The ST Developers Conference brings together STMicroelectronics and its partners with experts in markets that are poised for rapid growth in the coming years, including smart things for the Internet of Things (IoT); smart driving; and smart home, city, and industry.

The MAX14819 IO-Link master transceiver from Maxim Integrated is in stock at Mouser Electronics. The architecture of the MAX14819 reduces power dissipation by up to 50% and is fully compatible in all modes for IO-Link and SIO compliance to enable designers to incorporate intelligent sensors into Industry 4.0 or industrial Internet of Things (IoT) applications.

The Texas Instruments CC2650STK SimpleLink Bluetooth smart SensorTag loT kit assists design engineers to realise cloud-connected product ideas.

The CPT212B and CPT213B TouchXpress capacitive touch controllers from Silicon Labs is in stock at Mouser Electronics. The controllers eliminate time-consuming firmware development, providing a simple turnkey solution for adding touch-based designs to a wide range of products, including home appliances, medical equipment, consumer electronics, instrument and control panels, and lighting control.

MicroQSFP high-speed pluggable input/output (I/O) interconnects from TE Connectivity (TE) are available at Mouser Electronics. The interconnects are next-generation micro quad small form-factor pluggable (microQSFP) solutions designed to address key challenges relating to bandwidth, thermal performance, and energy costs in data centres.

The MAX32625MBED Arm Mbed-enabled development platform from Maxim Integrated is now being shipped by Mouser Electronics. The board provides a complete, functional system for developing and debugging a variety of low-power embedded systems, such as sensor hubs, connected sports devices, wearable medical patches, and fitness monitors.

The Arty Z7 development board from Digilent helps designers build a range of motor control and embedded vision systems on a ready-to-use development platform with Arduino Uno- and Digilent chipKIT-compatible headers, Digilent Pmod connectors, and USB and HDMI ports. It is available at Mouser Electronics.

  In this eBook, Mouser puts autonomous vehicles smack-dab in the middle of connected infrastructure and emphasises the Internet of Moving Things - where IoT meets mobility - because this intersection poses some of the most demanding and interesting design challenges.

With more and more applications requiring high accuracy atmospheric pressure data, engineers are seeking ever more sensitive pressure sensing methods. New sensor technologies that are based on capacitive sensing enable engineers to create miniaturised and very accurate devices while satisfying demanding energy constraints and addressing reliability challenges. By Sampo Härkönen, Senior Manager Pressure Sensor Marketing, Infineon Techno...

  As everyone is probably tired of hearing, the Internet of Things is supposed to connect everyone with everything connectable, everywhere. So far, there's been little tangible evidence of this, as it's being driven initially not by consumers but by industrial, government and other applications that are more difficult to spot.

    Paul Golata, Mouser, explains how you can express your designs with the Microchip MPLAB Xpress dev board.

  Paul Golata, Mouser, talks about shaping smarter cities, farming against the grain and intelligent analogue solutions for smart agriculture in deep space.

The BlueCoin hearing and motion sensing platform from STMicroelectronics (ST) is an integrated Bluetooth development system that incorporates low-power, high-performance 9-axis inertial and environmental sensors and a cluster of four digital MEMS microphones that are coupled with a powerful STM32F4 microprocessor. It is in stock at Mouser Electronics.

The S71KL512SC0 HyperFlash and HyperRAM Multi-Chip Package (MCP) from Cypress Semiconductor is available at Mouser Electronics. This memory subsystem solution combines high-speed NOR flash memory for fast-boot and instant-on with a self-refresh DRAM for expanded scratchpad memory in a reduced footprint, low-pin-count package that suits space-constrained and cost-optimised embedded designs.

The PolarFire Evaluation Kit from Microsemi, which allows designers to evaluate the PolarFire FPGA product family is now being shipped by distributor Mouser Electronics. The flash-based PolarFire field programmable gate arrays (FPGAs) deliver 100K to 500K logic elements at up to 50% lower power consumption than equivalent SRAM-based FPGAs.

The MAX30004 biopotential analogue front-end (AFE) from Maxim Integrated is in stock at Mouser Electronics. The device is a single-channel biopotential heart-rate detection AFE solution for wearable medical applications, such as chest bands and single-lead wireless patches for heart rate monitoring. It eliminates the need to extract and process electrocardiogram (ECG) data on its microcontroller for high-motion environments.

The Wireless Input Output (Wio) Tracker from Seeed Studio is an open source gateway that allows for faster GPS solutions for the Internet of Things (IoT) by tracking nearly any moving thing and uploading that data wirelessly. It is an Arduino-compatible development board that integrates Bluetooth 3.0 and GPRS into a single board for quickly and easily developing location-tracking solutions.

The Digi XBee Cellular 3G global embedded modem is in stock at Mouser Electronics. Designed to help original equipment manufacturers (OEMs) avoid time-consuming and expensive FCC and PTCRB end-device certifications, the modem enables engineers to quickly and easily integrate 3G (HSPA/GSM) with 2G fallback connectivity into their machine-to-machine (M2M) and Internet of Things (IoT) designs.

The LMX2594 wideband PLLatinum radio frequency (RF) synthesiser from Texas Instruments (TI) is now being shipped by Mouser Electronics. Part of TI’s PLLatinum series, the LMX2594 enables designers to easily synchronise the output of all onboard PLLs, saving design time for multiple-input/multiple-output (MIMO), beamforming, and other applications.  

Mouser Electronics, along with celebrity engineer Grant Imahara, has released the third videoin the Shaping Smarter Cities series, part of Mouser’s Empowering Innovation Together program. In the latest video, Imahara travels to Tokyo to meet with top executives and engineers from Mirai and discuss new developments in vertical farming.