LEMO SA

Address:
Ch. Des Champs-Courbes 28
P.O. Box 194
1024 Ecublens
Switzerland

Phone: (31) 251 25 78 20

Fax: (31) 251 25 78 21

Web: www.lemo.com


LEMO SA articles

Displaying 1 - 20 of 35

Multi-pin connectors to be showcased at EDS 2019

Multi-pin connectors to be showcased at EDS 2019
High quality interconnect products and technologies will be displayed by LEMO at this year’s Electronic Design Show in Coventry’s Ricoh Arena. Designing precision connectors  for over 70 years LEMO offers high quality, reliable connectors and cables in a vast number of product combinations which are found in a variety of challenging application environments.
30th August 2019

Rugged connectors to feature at DSEI 2019

Rugged connectors to feature at DSEI 2019
An extensive range of cables and standard off-the-shelf rugged multi-pin pull push connectors will be highlighted by LEMO at this year’s Defence and Security Equipment International (DSEI) exhibition at ExCel, London (September 10-13).
17th July 2019

LED connector available in three different designs

LED connector available in three different designs
It has been announced that LEMO connectors has enhanced its range of Halo connectors with additional product sizes and models. Initially launched in the B series, this product is now also available in the T series, a watertight IP68 connector. This new product range, configurable through the embedded electronics, features a wide range of colours with a RGB indicator arranged in a ring around the connector. 
5th February 2019


Expanded high performance range of interconnect solutions

Expanded high performance range of interconnect solutions
It has been announced that LEMO will be exhibiting its latest addition to the high performance Anglissimo range of interconnect solutions at Southern Manufacturing Exhibition, 5th to 7th February 2019 at FIVE, Farnborough Stand E180. 
21st November 2018

Lightweight sealed connectors designed for outdoor applications

Lightweight sealed connectors designed for outdoor applications
  LEMO will be exhibiting its latest compact lightweight sealed connectors, specifically designed for outdoor applications, at the Electronic Design Show, Ricoh Arena, Coventry from 17th-18th October this year.
17th August 2018

Lightweight connectors lined up for EDS show

Lightweight connectors lined up for EDS show
Compact lightweight sealed connectors, specifically designed for outdoor applications will be featured by LEMO at the Electronic Design Show, Coventry (October 17-18).  
17th August 2018

New hybrid fibre optic connector launched

New hybrid fibre optic connector launched
LEMO has launched a new connector for inter connection of HD video cameras in professional broadcast industry. The new hybrid connector called 3K.93C.Y series is fully compatible with existing SMPTE and ARIB standard. This recent LEMO design has less components allowing easy assembly and reducing the termination costs for the hybrid fibre optic connector. 
5th July 2018

New broadcast products launched at BVE 2018

New broadcast products launched at BVE 2018
Exhibiting two new innovative products at the Broadcast Video Expo 2018, LEMO attended the big event, which is the UK´s largest entertainment and media tech event. The first of the new products launched by LEMO at the show was a new range of 3K.93C.Y SMPTE 304M connectors. This product is the next generation version of LEMO´s industry-standard HD camera connectors which offers users the additional benefits of a lower total cost of ownership.
7th March 2018

New broadcast products launched at BVE 2018

Exhibiting two new innovative products at the Broadcast Video Expo 2018, LEMO attended the big event, which is the UK´s largest entertainment and media tech event. The first of the new products launched by LEMO at the show was a new range of 3K.93C.Y SMPTE 304M connectors. This product is the next generation version of LEMO´s industry-standard HD camera connectors which offers users the additional benefits of a lower total cost of ownership.
7th March 2018

Electrical interconnect solutions on display at Southern Manufacturing

Electrical interconnect solutions on display at Southern Manufacturing
LEMO will be exhibiting its latest range of electrical, electronic and fibre optic interconnect solutions from the 6th-8th February 2018, at the Southern Manufacturing & Electronics exhibition. This is the UK’s largest electronics show which is being held at the new Farnborough International Venue and Events (FIVE) located within the Farnborough Aerodrome.
10th January 2018

LEMO supports startup company with its robotic challenge

LEMO supports startup company with its robotic challenge
Electronic and fibre optic connector manufacturer, LEMO, has been supporting a startup based in Switzerland. The company named Rovenso was the finalist of the Robotics Challenge of the International Atomic Energy Agency. The event was held in Brisbane Australia. The goal of this challenge was to identify robots that will assist IAEA inspectors in carrying out their tasks.
6th December 2017

Push-pull connectors feature at EDS in Coventry

Push-pull connectors feature at EDS in Coventry
Push-pull multi-pin connectors from its extensive interconnect portfolio are being showcased by LEMO at the Electronic Design Show. The LEMO push-pull connector with its distinctive chocolate-block casing has expanded to suit customers’ evolving requirements, including smaller, lighter and environmentally-sealed variants.
18th October 2017

Custom connectors sent to Coventry

Custom connectors sent to Coventry
The design and manufacture of precision custom connection and cable assembly solutions will be the focus for LEMO in its exhibit for the Electronic Design Show at the Ricoh Arena in Coventry (18-19 October).
28th September 2017

DSEI 2017: Rugged connector range takes centre stage

DSEI 2017: Rugged connector range takes centre stage
An extensive range of standard off-the-shelf rugged multi-pin connectors will be showcased by LEMO at this year’s Defence and Security Equipment International (DSEI) exhibition. Of the many products on show will be the Group's M Series range of miniature high density ratchet locking circular connectors, which offer customers, space and weight saving benefits without compromises in performance, reliability or functionality.
22nd August 2017

Multi concentric contact connectors designed for low speed rotation

Multi concentric contact connectors designed for low speed rotation
  Electronics manufacturer, Lemo, has released a new range of multi concentric contact connector products dedicated to setups where connectors need to allow some rotation. Applications include petroleum downhole drilling systems and turret applications.
6th July 2017

Push-pull connectors accommodate epoxy sealing compound

Push-pull connectors accommodate epoxy sealing compound
The founder of LEMO, Léon Mouttet, invented a latching system 60 years ago. This invention was initiated from a personal problem he had encountered as he found that connectors accidentally disconnected when he undertook wildlife photography. LEMO launched the first ever range of push-pull connectors, offering customers a user-friendly and fail-safe alternative to the traditional screw or bayonet locking systems available at the time.
6th June 2017

Cable assembly production expanded by LEMO

Cable assembly production expanded by LEMO
  To meet the growing demand for 'plug-and-play' interconnect solutions, LEMO has announced a 50% expansion of its UK cable assembly service. This significant investment is part of an initiative the company has undertaken to support the growing manufacturing trend for OEM’s to outsource their non-core connector termination activities.
27th April 2017

New design for S series connector range

New design for S series connector range
    The S series connector is one of the initial designs of the LEMO Push-Pull connector system.
28th February 2017

Multi-shack and rotatable right-angled connector launched

Multi-shack and rotatable right-angled connector launched
Launching its new ANGLISSIMO range of rotatable right-angled connectors, LEMO (UK) will be at the Broadcast Video Expo 2017. This new range of push pull connectors offers users the ability to configure cable exit angles during installation and therefore minimise system costs through simplified assembly and a consolidation of connector variants required.    
23rd January 2017

Rotatable connector at Southern Manufacturing & Electronics 2017

Rotatable connector at Southern Manufacturing & Electronics 2017
  Launching its new ANGLISSIMO range of rotatable right-angled connectors, LEMO (UK) will be appearing at Southern Manufacturing & Electronics exhibition 2017.
16th January 2017


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

EMO Hannover 2019
16th September 2019
Germany Hannover
European Microwave Week 2019
29th September 2019
France Porte De Versailles Paris
HETT 2019
1st October 2019
United Kingdom EXCEL, London
World Summit AI 2019
9th October 2019
Netherlands Taets Park, Amsterdam
New Scientist Live 2019
10th October 2019
United Kingdom ExCeL, London