Kvaser AB Articles
Ethernet to CAN/CAN FD interface for DIN Rail mounting
Specialist in CAN (Controller Area Network) interfaces and data loggers, has announced the release of a multichannel, programmable Ethernet to CAN/CAN FD interface for DIN Rail mounting. The Kvaser DIN Rail SE400S-X10 has four CAN/CAN FD channels and supports up to four, optional Kvaser DIN Rail SE400S-X10 I/O add-on modules; analog, digital and relay.
Pro-level multiple bus interface launched
Kvaser has released the Kvaser Hybrid Pro 2xCAN/LIN, a flexible, dual-channel interface that allows automotive engineers to configure either channel as CAN, CAN FD (Controller Area Network Flexible Data-rate) or LIN (Local Interconnect Network). The Pro-level device can host user-developed programmes designed to accomplish advanced tasks such as CAN node simulation or the creation of a LIN to CAN gateway.
Leaf Light interface connects PC to marine electronics system
Controller Area Network (CAN) interface specialist, Kvaser AB, is pleased to announce a marine version of its highly popular Leaf Light HS v2 interface. With a USB 2.0 connector at one end and a 5-pin National Marine Electronics Association (NMEA) approved CAN connector at the other, the Kvaser Leaf Light HS v2 Marine provides a simple way to connect a PC to the on-board computer of a marine electronics system.
CAN FD passes bit rate tests
The recent CAN FD plugfest event, held in Detroit on 6th-7th April, saw the CAN with Flexible Data-Rate (CAN FD) IP from Kvaser get put through some rigorous bit rate tests – which it passed.
Kvaser updates its Leaf CAN interfaces
Swedish CAN hardware specialist Kvaser AB is pleased to announce two additions to its well-known Kvaser Leaf CAN to USB interface family, the Kvaser Leaf Pro HS v2 and Kvaser Leaf Pro HS v2 OBDII. This evolution of the Leaf family brings programmability to user’s fingertips, as well as CAN with Flexible Data-Rate (CAN FD).
Microchip & Kvaser collaborate to support CAN FD
Following a strategic collaboration between the two companies to support CAN FD (CAN with Flexible Data-rate), Microchip will be integrating Kvaser’s CAN and CAN FD IP in future controller products destined for automotive and industrial applications while Kvaser will benefit from Microchip’s extensive integration expertise and test capabilities.
CAN card is CAN-FD ready
A highly integrated, high speed CAN card that adds four high speed CAN channels to any standard computer board with PCIe capability has been introduced by Kvaser. Offering silent mode, error frame detection/generation and an on-board buffer, the Kvaser PCIEcan 4xHS fits many embedded data acquisition systems and is CAN-FD ready.
Device is a five-channel CAN-to-USB interface & datalogger
Allowing users to monitor and log data from multiple CAN channels using just one device, the Memorator Pro 5xHS five-channel CAN-to-USB interface and datalogger has been released Kvaser. The high-speed device not only time synchronises the data transmitted and received across all five buses but also automatically synchronises with other Kvaser interfaces connected to the same PC, resulting in a more accurate multichannel data capture.
CAN interface designed for automotive applications
Already available as a bare board version for embedded applications, Kvaser has introduced application-specific versions of its popular Leaf Light v2 interface. These latest version of the Controller Area Network (CAN) interfaces are designed for automotive and commercial vehicle diagnostic applications.
Kvaser Ethercan Light HS: The simplest way to connect CAN over Ethernet
Kvaser AB announce the Kvaser Ethercan Light HS CAN to Ethernet interface. Effectively, the Kvaser Ethercan Light HS facilitates the adoption of the Internet of Things (IoT) concept within modern manufacturing environments by enabling data from any CAN product or system to be accessed over the Internet, via an Ethernet equipped PC.
BlackBird v2 provides 75% better range
An upgrade to the original BlackBird CAN to WLAN interface, the BlackBird v2 HS CAN 2.0 to WLAN interface has been unveiled by Kvaser AB. Incorporating a new radio chip that gives it up to 75% better range, the Blackbird v2 can be accessed from any tablet PC or smartphone due to a new REST-based API.
Low-Profile CAN Board Suits Small Embedded Systems
The Kvaser Mini PCI Express HS is a highly integrated CAN add-on board that adds a single, high speed controller area network (CAN) channel to any standard computer board with mini PCI Express capability. Offering silent mode, error frame detection and an on-board buffer, the small form factor board is ideal for any embedded data acquisition systems, but is particularly envisaged for fleet management.
Kvaser AB is pleased to announce an updated version of its well-known Leaf Light CAN to USB interface
Evolution of the successful predecessor sees galvanic isolation become a standard feature of the new look interface, which features a sleek, ergonomically designed housing that makes the Leaf Light v2 easier to hold and to use than ever. The Leaf Light is perhaps the easiest way to connect a computer to a CAN bus network by means of the USB 2.0 compliant connector and 9-pin D-SUB connector.
Kvaser releases CAN data logger with scripting functionality
Kvaser AB has introduced a new high-speed controller area network (CAN) to USB data logger that boasts the ability to run user-developed scripts to suit a wide variety of CAN networking applications. Kvaser Eagle, a flexible, versatile, enhanced evolution of the Kvaser Memorator Professional, has been designed with engineers in mind who need customised features such as CAN protocol converters, CAN gateways, advanced CAN logging functionality, C...