Companies

Jennic

  • Furnival Street Sheffield
    S1 4QT
    United Kingdom
  • +44 (0) 114 281 2655
  • http://www.jennic.com
  • +44 (0) 114 281 2951

Jennic Articles

Displaying 1 - 20 of 30
Communications
24th November 2009
Jennic Enable Wireless Transportation of Real-time Logistics Data

Jennic, a manufacturer of innovative 32-bit wireless microcontrollers announces the release of its Logistics Reference Design, providing a comprehensive platform for use in monitoring and tracking of Goods in transportation. Based upon Jennic’s Patented Sleeping Beacon Technology, the platform allows battery powered, time-synchronised sleeping wireless sensor networks to be evaluated for Logistics applications. Sensors in the network periodical...

Wireless Microsite
30th October 2009
Jennic demonstrates ultra low-power ZigBee based transmissions using only 100µJ of harvested energy

Jennic, a manufacturer of innovative 32-bit wireless microcontrollers has demonstrated the capability of its JN5148 to perform multiple packet transmissions from 100µJ of energy harvested from an electro-mechanical switch. Jennic is the first wireless microcontroller vendor to show ZigBee communications are possible with such low energy consumption. The demonstrator shows how a single switch press is all that is required to enable the JN5148 to ...

Wireless
30th October 2009
Jennic demonstrates ultra low-power ZigBee based transmissions using only 100µJ of harvested energy

Jennic, a manufacturer of innovative 32-bit wireless microcontrollers has demonstrated the capability of its JN5148 to perform multiple packet transmissions from 100µJ of energy harvested from an electro-mechanical switch. Jennic is the first wireless microcontroller vendor to show ZigBee communications are possible with such low energy consumption. The demonstrator shows how a single switch press is all that is required to enable the JN5148 to ...

Wireless Microsite
22nd September 2009
Jennic - ZigBee modules based on industry’s lowest-power wireless microcontroller

Jennic has announced the availability of a range of integrated modules, based on its JN5148 wireless microcontroller. This new family of wireless modules allows Jennic’s customers to get to market quickly and easily while benefiting from the low power and high memory footprint of the JN5148, and without incurring the expense and time of designing an RF board or going through RF regulatory approvals.

Wireless
22nd September 2009
Jennic - ZigBee modules based on industry’s lowest-power wireless microcontroller

Jennic has announced the availability of a range of integrated modules, based on its JN5148 wireless microcontroller. This new family of wireless modules allows Jennic’s customers to get to market quickly and easily while benefiting from the low power and high memory footprint of the JN5148, and without incurring the expense and time of designing an RF board or going through RF regulatory approvals.

Pending
16th July 2009
Energy-harvesting to power IEEE802.15.4, ZigBee and 6LoWPAN wireless sensor networks

Jennic, a manufacturer of innovative 32-bit wireless microcontrollers and modules, announces a demonstration platform that successfully harvests thermal, solar, radio frequency (RF) and vibrational energy, to power wireless sensor networks based on the IEEE802.15.4 standard such as ZigBee PRO and 6LoWPAN.

Analysis
9th June 2009
Wireless microcontroller technology from Jennic plays key role in ensuring greater energy efficiency

Jennic’s JN5139 wireless microcontroller unit has been used by Gloucestershire based electronics consultancy firm MicroWatt to give its KnowWatt energy monitoring systems reliable RF data links. The JN5139 is optimised for low power operation, and boasts a work rate of 3MIPS for every mA of current that it draws. The device has a 32-bit RISC core, 192kB of ROM and 96kB of RAM. It incorporates a 4-input 12-bit analogue-to-digital converter, tw...

Wireless Microsite
13th November 2008
Jennic enhances wireless sensor network management and control with the release of JenNet 1v4

Jennic, a manufacturer of 32-bit wireless microcontrollers for IEEEE802.15.4 based low-power wireless applications, has released the next generation of its wireless networking protocol stack, JenNet 1v4. The new release introduces a list of new features for enhanced network management and control, addressing the requirements of applications such as building monitoring and control, industrial control and automation, medical, asset tracking and s...

Wireless
13th November 2008
Jennic enhances wireless sensor network management and control with the release of JenNet 1v4

Jennic, a manufacturer of 32-bit wireless microcontrollers for IEEEE802.15.4 based low-power wireless applications, has released the next generation of its wireless networking protocol stack, JenNet 1v4. The new release introduces a list of new features for enhanced network management and control, addressing the requirements of applications such as building monitoring and control, industrial control and automation, medical, asset tracking and s...

Wireless Microsite
3rd September 2008
Tridium’s Sedona Framework enabled by Jennic 6LoWPAN Stack and Wireless Microcontrollers

Jennic has announced that its 6LoWPAN software stack and wireless microcontrollers are enabling Tridium’s new ground-breaking Sedona Framework to add low-cost wireless IP-connectivity to a wide range of sensors and actuators in M2M applications.

Wireless
3rd September 2008
Tridium’s Sedona Framework enabled by Jennic 6LoWPAN Stack and Wireless Microcontrollers

Jennic has announced that its 6LoWPAN software stack and wireless microcontrollers are enabling Tridium’s new ground-breaking Sedona Framework to add low-cost wireless IP-connectivity to a wide range of sensors and actuators in M2M applications.

Micros
23rd June 2008
Jennic's 32-bit ZigBee PRO wireless microcontroller

Jennic has announced the introduction of a ZigBee PRO software stack to run on its JN5139 32-bit single chip wireless microcontroller. Both embedded single chip and co-processor configurations are supported, allowing designers of industrial automation, energy metering and home or building control applications to create highly-integrated, cost-effective products.

Wireless Microsite
19th May 2008
Jennic stack enables low-power IP communications for wireless applications

Jennic announces the industry’s first networking stack to enable a single-chip implementation for next-generation low-power wireless IP in embedded devices. By extending the widely understood IP protocol into the low power wireless domain, applications may leverage existing IP infrastructure and knowledge base, reducing development costs and time to market.

Wireless
19th May 2008
Jennic stack enables low-power IP communications for wireless applications

Jennic announces the industry’s first networking stack to enable a single-chip implementation for next-generation low-power wireless IP in embedded devices. By extending the widely understood IP protocol into the low power wireless domain, applications may leverage existing IP infrastructure and knowledge base, reducing development costs and time to market.

Design
15th April 2008
Jennic Starter Kit de-skills low power wireless connectivity for just $219

Jennic announces the immediate availability of a new low-cost Starter Kit which allows developers with little or no wireless experience to develop products. Priced at just $219, the JN5139-EK020 IEEE802.15.4/JenNet Starter Kit, simplifies the evaluation and application development of low power wireless connectivity products using Jennic’s robust and reliable JenNet networking stack.

Analysis
3rd February 2008
Jennic appoints Tony Gallagher as COO

Jennic Ltd. has appointed Tony Gallagher as chief operating officer to coordinate all operations and product development within Jennic as it becomes a volume supplier exploiting the opportunities emerging in the wireless microcontroller market.

Wireless Microsite
10th December 2007
Jennic launches JenNet stack for scalable wireless sensor networks

Jennic Ltd. has introduced JenNet, a new free proprietary wireless networking stack for its powerful range of 32 bit single chip wireless microcontrollers. Based on the IEEE802.15.4 standard, it is specially designed to be easy to use and is fully scalable from just a few nodes to large networks of up to 1,000 nodes.

Wireless
10th December 2007
Jennic launches JenNet stack for scalable wireless sensor networks

Jennic Ltd. has introduced JenNet, a new free proprietary wireless networking stack for its powerful range of 32 bit single chip wireless microcontrollers. Based on the IEEE802.15.4 standard, it is specially designed to be easy to use and is fully scalable from just a few nodes to large networks of up to 1,000 nodes.

Design
18th June 2007
New Jennic reference design is first to provide speech audio solution for IEEE 802.15.4 applications

Jennic’s new IEEE802.15.4 voice reference design enables secure full duplex transmission of speech with long battery life for use in point to point and large wireless sensor networks

Design
18th June 2007
Jennic announces ZigBee starter kit for under $200

Jennic Ltd. has announced a new starter kit for under $200 to address the needs of developers who want to add IEEE802.15.4 and ZigBee wireless connectivity to their product ranges but have little or no RF design or software development experience. It is the first design kit at this price point to offer ZigBee functionality as standard. The starter kit provides three hardware nodes (based on Jennic’s JN5139 wireless microcontroller modules) tha...

First Previous Page 1 of 2 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier