Hirose Electric Europe B.V.
- Hirose Electric Europe B.V.
Hogehilweg 8,
Amsterdam
1101 CC
Netherlands - https://www.hirose.com/eu/
Hirose Electric Europe B.V. Articles
Enhanced current carrying capacity for wire-to-board connectors
Developer of innovative connector solutions, Hirose, has expanded the current carrying capacity of the EnerBee power connector family. The DF60 Series wire-to-board connector now supports applications requiring current ratings up to 65A. Featuring a compact space-saving design, the DF60 Series power connector has a pitch of only 10.16mm.
Waterproof industrial push-on bayonet lock connector
Specialist manufacturer in connectors, HIROSE Electric, has introduced its new robust lightweight circular EM30M Series. The series is suited to connect wind power generation systems, medical equipment, and factory automation machinery applications. The push-on bayonet lock saves users time and reduces the risk of electrical shock with the IP2X rated specification designed for contact touch protection against access to hazardous parts.
In-line power connector features single action lock
HIROSE Electric has introduced the EF2 series of robust power connectors to meet the increased demand for high powered connectors offering advanced reliability for industrial equipment. The EF2 series consists of DIN rail mount type in-line power connectors that uses a single action robust lock connection method for inserting standard ring terminals to maintain a stable and secure connection.
Wire-to-board connectors designed for range of applications
HIROSE Electric has introduced the DF51 series of robust Wire-to-Board Connectors for applications requiring more strength and durability. A wide range of applications are suitable such as industrial machinery, medical devices, smart meters, and industrial robots.
USB Type-C connector product offering for high current requirements
The compact USB 3.1 Gen2 Type-C connector family from Hirose with the introduction of four new versions that offer high current performance, waterproof certification and vertical orientation for enhanced design flexibility in a compact form factor.
High current connector offers resistance to rough handling
HIROSE Electric has introduced its new robust lightweight circular EM52M Series. The series is suitable to connect wind power generation systems, medical equipment, and factory automation machinery applications. The push-on bayonet lock save designers valuable time and reduce the risk of electrical shock with the IP2X rated specification designed for finger protection against access to hazardous parts.
Board-to-board connector delivers high transmission speeds
Hirose has developed a miniature board-to-board connector that combines a rugged design with high-speed transmission speeds of more than 10Gpbs to support a number of industrial applications. Featuring a pitch of only 0.8mm pitch, the ER8 Series contacts are optimised for signal integrity performance, ensuring reliable high-speed performance.
Industrial connector offering expanded
Expanding its ix Industrial Series product offering, an insulation displacement connector (IDC) plug assembly for faster installation and a 'B' Key version for non-Ethernet applications has been introduced by Hirose, a the development of innovative connector solutions.
Connectors support high speed transmission for industrial applications
HIROSE has introduced the ER8 series of connectors that supports high speed transmission of more than 10Gbps for industrial applications.
Connector combines higher power rating with lower profile
Hirose has launched a miniature FPC-to-board connector designed for power line connection in portable devices such as drones, IoT modules, laptops, medical devices, smart phones, tablets, wearables and more. With a space-saving design that includes a 0.35mm pitch, stacking height of only 0.6mm, and depth of 1.7mm, the low-profile BM28 Series hybrid FPC-to-board offers design flexibility and enables the miniaturisation of portables devices.
Miniature connector suitable for industrial Ethernet
At ENOVA Paris which took place 19th to 21st September 2017, Electronic Specifier met with Hirose Electric Europe. The Japanese connector company were excited to present its new products for the first time in France, and we got the chance to interview John de Graaf (pictured), Hirose’s Deputy General Manager for Sales and Marketing. At the show, Hirose presented its ix Industrial connector which features a small and robust de...
FFC/FPC connectors meet harsh automotive requirements
Suitable for industrial and automotive applications, HIROSE has introduced the FH63 series range of Flat Flexible Circuit/ Flat Printed Circuit (FFC/FPC) connectors to allow automated insertion of a FFC/FPC. The connector series is 105°C heat resistant and meets severe automotive requirements, and supports the signal transmission requirements of Embedded Display Port 1.3, HDMI 1.4a, USB 3.0, and V-by-One HS.
Compact connector for development of thinner portable devices
Designer and manufacturer of innovative connector solutions, Hirose, has developed a compact flexible printed circuit (FPC) connector that offers a low-profile of only 0.5mm with a space-saving 0.25mm pitch and depth of 3.15mm when locked. The FH64MA series contributes to profile reduction in a variety of portable and consumer devices including active trackers, electronic labelers, laptops/tablets, portable audio players, portable gaming devices,...
Wire-to-board connector replaces traditional terminal blocks
Designer and manufacturer of connector solutions, HIROSE, has launched a user-friendly, wire-to-board connector for LED lighting module applications. The KN27 series was developed to replace traditional terminal blocks in LED lighting module applications. The design eliminates the need to screw down the connection and check for loosened terminal block screws, and offers a more reliable termination that reduces installation variation, time, and co...
Board-to-board connector ensures correct and safe mating
A versatile board-to-board connector system has been launched by Hirose that combines specialised floating contact alignment with a high-current carrying capability up to 25A. Part of the FunctionMAX connector family, FX30B series has a contact design that can absorb misalignment up to ±0.3mm in the X and Y directions and 1.0mm in Z direction. This is particularly beneficial when multiple connectors are used on the same PCB, as the fl...
Power connector features secure one-step connection
To support a wide range of power control and battery applications, Hirose has developed a single-pole 160A in-line power connector. The high-current EF1 series power connector utilises a crimp contact that offers a quick and secure one-step connection. The snap-in lock produces a secure, locking connection and eliminates the need for contact screws, ensuring a stable and consistent connection. The EF1 series has a highly reliable contact spr...
Compliant Interface Connector developed with efficient design
A mid-mount USB 3.1 Type-C receptacle with an efficient design, has been developed by Hirose, which offers a compact footprint to save valuable board space. Featuring a depth of only 8.35mm, the shorter design creates additional board space for optimising antenna designs and space for larger batteries. By comparison, conventional Type-C connectors are significantly longer, up to 9.4mm, which uses valuable board space.
High-current power connector simplifies installation
Hirose has launched a new high-current power supply connector with a snap-lock mechanism that ensures a safe and secure connection. Available in panel mount and DIN rail versions, the snap-lock EM35M Series power connector reduces wiring procedures and eliminates screw loosening commonly found in buss bar applications. Designed for manufacturing power control boxes, generators, fuel batteries, and more, the EM35M Series power connector suppo...
Connector simplifies PCB layout
Hirose has developed a serial digital interface (SDI) compliant connector that supports high transmission speeds up to 12Gbps. The miniature BNC75 Series radio frequency (RF) connector features an optimized centre contact design that simplifies PCB layout and supports SMT processing, decreasing labour and assembly time.
SDI connector simplifies PCB layout and reduces labour
A Serial Digital Interface (SDI) compliant connector has been developed by Hirose that supports high transmission speeds up to 12Gbps. The miniature BNC75 series Radio Frequency (RF) connector features an optimised centre contact design that simplifies PCB layout and supports SMT processing, decreasing labour and assembly time. The BNC75 series connector supports 3, 6 and 12G transmission, and is available in thread-fastened and bulkhea...