Companies

FCT Assembly

  • 1309 North 17th Avenue Greeley, CO
    80631
    United States of America
  • +1 970-346-8002
  • http://

FCT Assembly Articles

Displaying 1 - 20 of 24
Events News
26th January 2015
FCT Assembly to exhibit at SMTA Rocky Mountain Expo

At the SMTA Rocky Mountain Expo Tech Forum, FCT Assembly will be available to discuss the company’s NanoSlic Gold stencil and line of solution driven solder pastes. The event is scheduled to take place on 28th January 2015 at the West Club of the Mile High Stadium in Denver, CO.

Events News
20th January 2015
Solder paste evaluation process presented at IPC APEX

A new process for evaluating solder pastes will be demonstrated by FCT Assembly in Booth #713 at IPC APEX, 24th to 26th February in California. Tony Lentz, Field Application Engineer, will present the paper written on the new evaluation process. 'Dispelling the Black Magic of Solder Paste' will be held during the Fluxes Technical Conference Session on 24th February from 1.30 to 3pm.

Optoelectronics
26th November 2014
Laser direct structuring enhances design flexibility

FCT Assembly announces that its A-Laser Division will discuss its Laser Direct Structuring (LDS) capability in Booth 235 at the BIOMEDevice Show, scheduled to take place 3rd to 4th December at the San Jose Convention Center, California. The introduction of LDS has revolutionised the moulded interconnect device market, bringing flexibility to design and enhancing product capability.

Events News
25th November 2014
Gold stencil & solder paste range on show at Expo & Tech forum

FCT Assembly has announced plans to exhibit at the Space Coast and Tampa Bay Expo & Tech Forum, scheduled to take place on 4th December 2014 at the Park Inn by Radisson in Kissimmee, Florida. Solder expert Rodney Wade will be available to discuss FCT’s NanoSlic Gold stencil and line of solution-driven solder pastes.

Events News
2nd September 2014
Development Chemist to lead SMTAI Poster Session

Development Chemist Brittney Nolan, from FCT Assembly, will make a presentation entitled “The Impacts of the Environment on the Printability of Solder Paste” at SMTAI 2014. The presentation will take place on Tuesday 30th September from 12-2pm in the Exhibit Hall at the Donald Stephens Convention Center in Rosemont, IL.

Events News
2nd September 2014
'Changing the Rules of Stencil Design' at SMTAI

Tony Lentz, Field Application Engineer, FCT Assembly, will present a paper exploring nano coatings at SMTA International. The paper, titled 'Performance Enhancing Nano Coatings: Changing the Rules of Stencil Design', will be presented during Session SMT4, “Stencil Printing Advances for Today’s Electronics", on October 1st.

Events News
27th August 2014
Gold stencil to take centre stage at SMTA International 2014

Exhibiting in Booth #221 at SMTA International 2014, FCT Assembly will demonstrate the NanoSlic Gold stencil and Step and Relief Stencils. Company representatives will also be on hand to answer any questions about FCT’s stencils and its coating technology.

Events News
11th August 2014
Stencil coating to be exhibited at SMTA Expos

Representatives from FCT Assembly plan to exhibit the company's NanoSlic stencil coating and its solder pastes at the 2014 SMTA Philadelphia and SMTA West Penn Expos. The former is scheduled to take place on the 12th of August, at the Crowne Plaza Philadelphia in Cherry Hill, New Jersey, and the latter on the 14th of August, at the Doubletree Hotel in Monroeville.

Analysis
16th June 2014
FCT Assembly appoint Sales Manager

FCT Assembly have announced the promotion of employee Rodney Wade to Regional Sales Manager within the Souteast.

Component Management
5th March 2014
FCT Assembly exhibit stencils and coating technology

At the SMTA Dallas and SMTA Houston Expos (March 4th and 6th in Plano and Stafford, Texas, USA), FCT Assembly will exhibit the company's latest stencils and coating technology. Company representative, Greg Smith, who works locally in the Texas area, will be on site to answer any questions about stencils and coating technology.

Events News
5th February 2014
Tony Lentz to discuss stencil applied coatings at APEX 2014

At this year's IPC APEX EXPO, FCT Assembly's Tony Lentz will be presenting “Can Nano Coatings Really Improve Stencil Performance?”. During and after the poster session, held between 3:30-4:30 p.m at the Mandalay Bay Convention Center in Las Vegas, Mr. Lentz will be available to answer any questions regarding stencil coatings, solder paste, solder fluxes and printing issues.

Component Management
3rd February 2014
Solder pastes reduces tombstoning potential

Providing a way in which to reduce the potential for tombstoning, FCT's anti-tombstoning solder pastes are now available as an option with each of its solder paste fluxes.

Component Management
22nd January 2014
Stencil confronts electronic assembly demands

Claiming to be the world’s most advanced stencil technology for solder paste printing, FCT Assembly have launched the NanoSlic Gold stencil. The stencil recieved the 2013 NPI Award for coatings/encapsulates.

Test & Measurement
13th May 2013
FCT Assembly Installs New Micrometers to Improve Stencil Accuracy

FCT Assembly today announced that it has installed new Mitutoyo Deep Throat Micrometers to accurately measure the step etch depth over the entire surface of the stencil. This is another example of the improvements FCT Assembly is putting in place since the purchase of Global Stencil.

Analysis
6th March 2013
FCT Assembly Appoints Tony Lentz to Field Application Engineer

FCT Assembly today announced the appointment of Tony Lentz to field application engineer. For the last 14 years, Tony has worked for FCT companies as a chemical laboratory manager and facility manager.

Analysis
6th February 2013
FCT Assembly Acquires Global Stencil and MRC

FCT Assembly announces that on February 1, 2013, Global Stencil became part of Fine Line Stencil, a subsidiary of FCT Assembly. Global Stencil has a great reputation and Fine Line Stencil plans to continue to fulfill customer needs with great products and service.

Analysis
18th January 2013
FCT Assembly To Debut New NanoSlic Multilayer Coating At The IPC APEX EXPO

FCT Assembly announces that it will highlight its new NanoSlic Multilayer Coating for the first time in booth #2627 at the upcoming IPC APEX EXPO, scheduled to take place February 19-21, 2013 at the San Diego Convention Center in California. Florida CirTech has developed the world’s first user upgradeable Nano Coating technology for solder paste stencils. It is comprised of 1) A Nano base coat applied over its proven Slic stencil and; 2) A user...

Events News
28th September 2012
FCT Assembly’s Sergio Juarez Offered Helpful Tips for Lead-Free Soldering during the SMTA Austin Expo and Tech Forum

FCT Assembly announces that Sergio Juarez, Sales Manager Mexico & C.A., held a successful presentation at the recent SMTA Austin Expo and Tech Forum that took place on Wednesday, September 26, 2012 at the Norris Conference Center in Austin, TX. Juarez’s presentation entitled “Impact of Strain on Lead-Free Alloys” was well attended and accepted by the audience.

Analysis
12th October 2011
A-Laser to Highlight Laser Cutting for Medical Components at MD&M Minneapolis

A-Laser, a division of FCT Assembly will feature laser cutting for medical components in Booth #1531 at the upcoming Medical Design & Manufacturing (MD&M) Exposition, scheduled to take place November 2-3, 2011 at the Minneapolis Convention Center in Minnesota.

Analysis
29th September 2011
FCT Assembly Appoints Promark Electronics

FCT Assembly announces the appointment of Promark Electronics, Inc. as its representative for New York State and Eastern Pennsylvania. “Promark Electronics can offer new leads and prospects in their territory that are essential to the growth of our company,” commented Mike Scimeca, President & CEO of FCT Assembly.

First Previous Page 1 of 2 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier