Fairview Microwave
-
1130 Junction Dr., suite 100
Allen
TX 75013
United States of America - +1 (972) 649-6678
- http://www.fairviewmicrowave.com
Fairview Microwave Articles
Electromechanical switches have low insertion loss repeatability
Supplier of on-demand RF and microwave components, Fairview Microwave, has unveiled a new series of low insertion loss repeatability electromechanical switches. These electromechanical switches exhibit low insertion loss repeatability which is guaranteed over millions of switching cycles. This performance is extremely useful to help maintain overall system measurement accuracy.
High speed millimetre-wave connectors launched
Supplier of on-demand microwave and RF components, Fairview Microwave has released a new line of high speed end launch connectors. They are suitable for signal integrity measurements, chip evaluations, coplanar waveguide, 25GbE, SERDES, substrate characterisation and test fixture applications.
Waveguide to coax adapters available in various sizes
Fairview Microwave Inc. has launched a new series of waveguide to coax adapters that cover a frequency range of 1.7 GHz to 110 GHz in 22 waveguide bands. Typical applications include test benches, instrumentation, high efficiency RF/Microwave transmission, MILCOM, SATCOM, radar and telecom. Fairview’s new line of waveguide to coax adapters consists of 77 models in sizes of WR-10 to WR-430.
New low pass filters designed for frequency bands
Supplier of on-demand microwave and RF components, Fairview Microwave has introduced a new series of low pass and bandpass filters for use with multiple popular frequency bands.
PLL frequency synthesisers cover 25MHz-27GHz bandwidths
A line of USB-controlled, phase locked loop (PLL) frequency synthesisers has been released by Fairview Microwave. In RF and Microwave communications systems where signal integrity is priority, PLL synthesisers offer superior frequency stability and accuracy with exceptional phase noise characteristics that allow components in the signal chain to perform at their optimal levels.
Portable test cables facilitate RF analysis
Supplier of on-demand microwave and RF components, Fairview Microwave, has introduced a new series of rugged, portable, phase stable RF analyser cables. Typical applications include handheld network analysers, base station analysers, portable spectrum analysers, field testing, tower measurements, distance-to-fault measurements and site maintenance.
Waveguide sections offered in sizes from WR-10 to WR-137
Supplier of on-demand microwave and RF components, Fairview Microwave, has launched a line of straight waveguide sections that operate in the frequency range of 5.85 to 110GHz and in 13 waveguide bands from C to W band.
Oscillators cover frequencies of 10 MHz up to 4350 MHz
Fairview Microwave has released 16 new voltage-controlled oscillator (VCO) models covering bands from 10 MHz to 4350 MHz. Unlike traditional oscillators with a single fixed frequency, VCOs allow the frequency of the output signal to be varied by adjusting the amplitude of the input tuning voltage. These products are used in military electronics, SATCOM, test and measurement and wireless communications.
BMA connectors provide low VSWR
Supplier of microwave and RF components, Fairview Microwave, has launched a product line of 45 BMA connectors with Voltage Standing Wave Ratio (VSWR) as low as 1.2:1, and seven BMA adapters with VSWR as low as 1.15:1.
Connectors and adapters provide maximum operating frequency
Fairview Microwave has released 18 new 4.3-10 connectors and adapters with low-PIM performance of -166 dBc typical and a maximum operating frequency of 6GHz. Typical applications include wireless base stations, small cells, custom cable assemblies, antenna feeder cables, mobile communications systems and Distributed Antenna Systems (DAS).
Flexible VNA test cables operate up to 110GHz
Supplier of on-demand microwave and RF components, Fairview Microwave, has introduced a new line of 1.0mm flexible cables operating up to 110GHz. These cables are designed to provide precision results for Vector Network Analyser (VNA) testing, automotive radar testing, semiconductor probe testing and military radar testing. These VNA cables are suitable for use in radar, test bench, millimeter wave radio and microwave radio applications.
Analogue phase shifters use TTL logic interface for precise control
A supplier of on-demand microwave and RF components, Fairview Microwave, has introduced a series of 8-bit programmable phase shifters that are adjustable over a full 360° range. These three new models can produce a discrete set of phase states of up to 256 total steps in 1.4° increments with superior accuracy and minimal phase shift error.
Waveguide Gunn oscillator can be tuned up to +/-1.0GHz
A waveguide Gunn oscillator from Fairview Microwave offers a cost-effective source for microwave power with excellent frequency and power stability while generating low-phase-noise. Typical applications include transmit and receive oscillators for radio communications, local oscillator source that can be multiplied for higher mm-wave frequency test and measurement, military and commercial radar sources, police radar, Doppler sensors and security ...
MMBX connectors and adapters aid circuit board connectivity
Fairview Microwave offers small form factor MMBX connectors and adapters most commonly used on circuit boards and their associated input/output connections for industrial, telecom and consumer product applications. MMBX-style connectors and adapters are specifically designed to provide versatile and easy PCB-to-PCB connections as well as coax-to-PCB connections. Their mechanical design also allows them to work well in backplane applications.
Right-angle waveguide to coax adapters operate up to 65GHz
A supplier of on-demand microwave and RF components, Fairview Microwave, has released a line of 1.85, 2.4 and 2.92mm waveguide to coax adapters with operating ranges up to 65GHz. These waveguide adapters are ideal for numerous applications requiring a transition from coax to waveguide or vice versa, including SATCOM, wireless communications, industrial, test and measurement and defense systems.
Waveguide bends support frequencies up to 90GHz
A line of waveguide bends operating from 5.85-90GHz across 12 frequency bands (from C band to W band) has been launched by Fairview Microwave. These waveguide bends are frequently used in applications such as high efficiency RF, test benches, instrumentation, microwave and mm-wave transmissions, MILCOM, SATCOM, radar and telecom.
Waveguide twists operate across seven frequency bands
A family of precision waveguide twists operating across seven frequency bands from 18-110GHz has been unveiled by Fairview Microwave. These twists are specifically designed to prevent unwanted distortion in the signal’s transmission and are useful for systems requiring a turn in the polarisation and waveform.
Zero bias detectors display flat frequency response
Supplier of on-demand microwave and RF components, Fairview Microwave, has expanded their portfolio of zero bias Schottky detectors that display extremely flat frequency response over broad RF and microwave frequencies from 10MHz-26.5GHz.
Switches offer high performance covering DC to 40 GHz
Fairview Microwave has announced that it offers a line of electromechanical relay transfer switches that cover frequencies from DC to 40 GHz and feature exceptional performance with low insertion loss and high isolation levels. This product line consists of 43 unique electromechanical relay transfer switches that can be utilised for numerous applications to increase system level capabilities and help simplify the overall design approach.
Solid state GaN power amplifiers save design time
Fairview Microwave has announced a line of solid state GaN power amplifiers offering designers a unique solution of off-the-shelf components, typically requiring months of lead time to acquire.