Euroquartz has today announced that it will be showcasing its new ranges of high precision low jitter oscillators and VCXOs at the Electronics Design Show, Coventry, 2-3 October 2013. Offering a low cost and technically superior solution for new and existing designs, the new QF series oscillators and VCXOs are available with very quick delivery leadtimes.

Euroquartz has today revealed that it will be showing its wide range of high reliability crystal and oscillator products at the Defence & Security Equipment International 2013 exhibition, ExCeL, London, 10 to 13 September 2013. Euroquartz supplies markets where high reliability components are essential. These include crystals and oscillators for electronic systems used in satellites, civil and military aircraft and a broad range of ‘defence rel...

Euroquartz have today introduced two new ranges of high precision low jitter oscillators that are available on very quick delivery leadtimes and offer a low cost and technically superior solution for new and existing designs. Typically available in as little as 5 to 10 days, the new HTQF and HPQF series have been developed as precision frequency control components providing CMOS (HTQF) and LVPECL (HPQF) output clock oscillators offering low curre...

Euroquartz has added another oscillator to the company’s range of Spread Spectrum low-EMI oscillators that reduces electromagnetic interference by up to 15dB. The new 18HM series oscillators have a supply voltage of 1.8V. The part is available in three standard surface mount package sizes: 3.2 x 2.5mm, 5 x 3.2mm and 7 x 5mm. The oscillators are drop-in replacements for standard clocks.

Euroquartz have launched a new, micro-miniature TCXO, the EM22S series. At 2.5 x 2.0 x 0.8mm the micro-miniature packaged TCXO offers excellent stability and general perfomance. Utilizing crystals in fundamental-mode this clipped sine wave output, 4 pad SMD TCXO has low jitter and excellent phase noise performance.

Euroquartz has introduced a new range of high performance surface mount clock oscillators offering tolerance and stability parameters close to that of temperature-compensated oscillators but at clock oscillator prices. Offering frequency range from 20.0 to 60.0MHz, the new XOE oscillators feature tolerance of ±1ppm at 25°C and maximum of ±5ppm frequency stability over the industrial -40 to +85°C temperature range.

Euroquartz has introduced Statek’s latest crystal oscillator that is designed for high temperature, high shock applications. Offering frequency output from 460kHz to 50MHz, the new Statek HGXOHT is capable of operation up to 225°C and can survive extremely high shocks – up to 100,000g. Suitable applications include downhole instrumentation, rotary shaft sensors, underground boring tools and avionics.

Euroquartz has announced the release of two new series of surface mount PECL oscillators offering high performance at a surprisingly low cost. The new HPK5361 and 5761 series PECL oscillators offer ultra-low phase noise of -138dBc/Hz at 10kHz and femtosecond integrated phase jitter (200fs typical).

Euroquartz has today announced the introduction of a new high-performance range of surface mount clock oscillators offering high precision and high temperature stability. Offering frequency range from 1.0 to 56.0MHz, the new XOR91 oscillators exhibit superior phase noise performance of -145dBc/Hz at 10kHz and -150dBc/Hz at 100kHz and integrated phase jitter of 300fs typical, 12kHz to 20MHz.

Euroquartz has today revealed the introduction of a new range of duplexers enabling simultaneous transmit and receive from a single antenna. Enhancing the company’s crystal filter offering, the new duplexers are three-port devices comprising a combination of transmit and receive filters with a common antenna port.

Euroquartz has announced the release of two new ranges of low power oscillators in miniature surface mount packages. The new XOK53 and XOK91 series offer low supply current operation of less than 1.7mA with 1.8V power supply and less than 2 micro in disabled mode.

Euroquartz has today announced that it is promoting its XOR range of high stability clock oscillators and its latest miniature SMD crystal in the smallest package yet at the forthcoming Electronica 2012 exhibition, 13th to 16th November, Munich, Germany. Euroquartz is exhibiting on stand 528 in hall B5.

Euroquartz has announced the release four new ranges of low voltage crystal oscillators in miniature surface mount packages. The new XO22, XO32, XO53 and XO91 series offer supply voltages from 5V down to 1.0V enabling current consumption as low as 2.0mA and making the oscillators ideal for use in battery powered applications.

Euroquartz is pleased to unveil a new range of voltage controlled crystal oscillators in miniature surface mount packages. The new G534 VCXOs are housed in miniature 5 x 3.2 x 1.2mm SMD packages and are available in the frequency range 625kHz to 50MHz. The small package size makes these oscillators ideal for use in a wide range of applications including phase-locked loop, SONET/ATM, set-top boxes, MPEG, audio/video modulation, video games cons...

Euroquartz has announced the release of its latest ultra-miniature AT-cut crystals covering the frequency range 16 to 60MHz in fundamental mode. The new X22 crystals are housed in a microminiature 2.5 x 2.0 x 0.6mm surface mount package making them ideal for use in miniaturised hand-held equipment such as PDAs, GPS, PCMCIA and similar high density applications where space is at a premium.

Euroquartz has launched a new surface mount temperature compensated crystal oscillator (TCXO) from Greenray Industries, Inc. that offers temperature stabilities more usually associated with oven controlled temperature compensated (OCXO) devices - as low as ±7 x 108 over an operating temperature range as wide as -50 to +95°C. Equally impressive, the new T1220 features current consumption of less than 30mA.

Frequency control specialist Euroquartz offers design engineers a wide range of crystals and oscillators on a quick turnaround service to enable them to speed up initial design-in timescales. Factory programmed oscillators can be supplied in any frequency on a 48 hour turnaround from the company's UK facility. These oscillators can be supplied in a variety of formats such as the popular 7 x 5mm SMD, as well as standard through-hole packages, 14 p...

Frequency control specialist, Euroquartz has introduced a new range of configurable surface mount oscillators that are available on a two week leadtime for production quantities. XpressO oscillators are high performance frequency control devices of choice with or without fast delivery.