ERNI Electronics GmbH

ERNI Electronics GmbH Articles

Displaying 41 - 60 of 60
25th March 2014
Connectors meet requirements of modern lighting applications

Highly reliable, extremely compact in design and supporting a high current carrying capacity, ERNI Electronics offers connector solutions in a multitude of variants to satisfy the requirements of modern lighting technology, such as dashboard lighting units in cars, accent lighting in homes and enterprises and power-saving street and building lighting systems.

18th February 2014
ERNI expands COM portfolio at embedded world 2014

At embedded world 2014, February 25-27 in Nuremberg, Germany, ERNI Electronics will present their expanded COM portfolio from Hall 4, Booth 348. The current models in the WHITEspeed COM family are complemented with new variants for higher performance and also for highly cost-sensitive applications.

24th January 2014
Connectors achieve 25Gbps data rates

Data rates of more than 25Gbps are now possible the MicroSpeed family of connectors from ERNI Electronics. Previously permitting data rates of up to 20 Gbps (differentially), current measurements and simulations now prove that, with corresponding design criteria and layout (-2dB insertion loss, 5 mm board-to-board spacing), 25Gbps data rates can now be achieved.

10th December 2013
Wire-to-board connector for demanding environments

ERNI Electronics has introduced the iBridge single-row cable connector system. Supplied in a 2.0mm pitch form factor and providing up to 5A per contact at 20°C when paired with an appropriate discrete wire, the compact and economical wire-to-board interconnect solution is ideal for use in demanding environments that require reliable connections.

26th November 2013
Central electrical systems for commercial vehicles

ERNI Electronics introduce the BLUEcontact line of central electrical systems. Developed using the company's extensive expertise in pressfit technology, these central control and supply units set new standards in terms of shock and vibration resistance. Ensuring reliable and compact connections with high current load capacity, the BLUEcontact line is ideal for the commercial vehicle sector, where a reliable conn...

8th October 2013
ERNI Electronics Provides Tailor-Made Protection for Electronic Assemblies

ERNI Electronics expands its service offering providing efficient and reliable coating for electronic boards and assemblies. The company addresses the increasing market need on reliable protection of modern boards and electronic components. To fulfill the various application demands ERNI offers three different coating processes. When selecting the process technologies, the goal was to avoid complex and time consuming manual masking work - as is o...

23rd September 2013
ERNI Electronics' extremely compact angled M12 PCB connector

ERNI Electronics has added an innovative 90 degree version of the M12 connector to its M12 product line. Solutions for standard applications (pin and socket) and for M12 sensor tubes (pin) are available. The new angled M12 connectors are the first of their kind that are suitable for automated Pick&Place assembly and reflow soldering processes.

30th May 2013
ERNI Electronics Extends Portfolio of PowerElements for the Automotive Industry

Within the scope of its BLUEcontact Solutions, ERNI Electronics has extended its offering of versatile PowerElements for the automotive industry. The portfolio of PowerElements with a combined flexible/massive press-fit zone has been extended with variants with purely massive press-fit contacts. In doing this, ERNI is further extending its services and portfolio of key components for automotive customers on the basis of its wealth of expertise in...

4th April 2013
ERNI Electronics with new management structure

ERNI Electronics today announced the reorganization of its corporate management. This restructuring measure will further strengthen and optimise the Distribution and Manufacturing divisions. Furthermore, in the wake of this reorganisation, the company sees itself as being better positioned for the international market.

29th October 2012
ERmet ZD and ERmet ZDplus Connectors Enable Performance Increase in New AdvancedTCA 3.1R2 Specification

PICMG recently announced the adoption and availability of the AdvancedTCA 3.1R2 specification. The new specification increases system bandwidth by four times, allowing a single chassis to handle data transfers up to 10 terabits per second for full mesh designs. This translates into transporting and switching over 2 million High Definition video channels at the same time.

16th October 2012
ERNI Electronics extends MicroCon connector family

ERNI Electronics has significantly extended the MicroCon connector family. In addition to the 50-pin straight male and female connectors originally introduced, other versions with different numbers of pins, heights and also in angled variants are available for delivery at short notice.

20th July 2012
ERNI Electronics Launches New Website

ERNI Electronics has given its website a complete makeover. The idea here being to take the company’s extended product and service offering into account, which is summarised under the slogan ERNI WoR&D. The service offering now includes state-of-the-art cable assembly, wide-ranging design services through to fully assembled and tested systems in addition to efficient Electronic Manufacturing Services with assembly, soldering and reworking.

11th June 2012
ERNI Electronics Offers Comprehensive Services and Key Components for Commercial Vehicles

Based on its vast expertise in the field of connectors and board design, ERNI Electronics is expanding its services and offering of key components for the central electronics in commercial vehicles. In this regard, the company is addressing the areas of the driver’s cab, the exterior and the engine compartment of buses, construction machines, trucks, tractors and tractor units. To ensure reliable connections also in the case of higher currents,...

30th January 2012
ERNI Electronics Enters the COM Market

ERNI Electronics today announced its entry into the growth market of computer-on-modules (COM). At Embedded World in Nuremberg, the company is presenting the first products of the new WHITEspeed family. With these products, ERNI is addressing the requirements of the market for powerful, reliable and space-saving embedded computers.

10th November 2011
ERNI Electronics Extends Range of Services

Based on its comprehensive portfolio of high performance connectors, ERNI Electronics is constantly and consistently further developing its range of services. The offering includes state-of-the-art and highly efficient cable assembly, wide-ranging design services through to complete and tested systems in addition to comprehensive electronic manufacturing services (EMS) with assembly, soldering and repair/rework. In the area of system technology, ...

18th October 2011
ERNI Electronics Awarded ISO TS 16949:2009 Certification

Following the successful audit by the TÜV Rheinland Technical Inspectorate, ERNI Electronics has been awarded ISO TS 16949:2009 certification. The ISO TS 16949 Technical Specification is the first globally valid certification standard for quality management systems of automotive suppliers and their sub-suppliers. It combines the contents of current quality standards such as QS 9000 (USA), VDA 6.1 (Germany), EAQF (France) and AVSQ (Italy). ISO TS...

14th October 2011
ERNI Electronics Launches New Dual-Row SMT Connector Family with 0.8mm Pitch

ERNI Electronics today introduced a new fine pitch connector family leveraging from its huge expertise with miniaturized SMT connectors. The dual-row MicroCon series with 0.8mm pitch is ideal for various demanding applications in the industrial, medical, lighting, automotive and consumer market. Due to the small dimensions - the 50-pin male connectors show dimensions of only 24.2mm x 4.7mm with different heights - robustness was crucial during th...

26th September 2011
ERNI Electronics Enables Reliable PCB Connection At Minimal Required Space

ERNI Electronics enables reliable PCB connections in extremely miniaturized applications like bulbs or LED systems. The new IDC-PCB terminal with a total height of only 2.9mm eliminates manual preparation of wires prior termination. The IDC dual contact provides a reliable gas tight connection to conductor of wire. These means that the costly and unreliable hand soldering can be replaced and no special tool is required for termination

15th March 2011
ERNI Electronics extends SMC family with additional pin numbers in all variants

ERNI Electronics is enhancing its popular two-row SMC connector family in a 1.27mm pitch with versions featuring additional pin numbers in all the available configurations (straight and angled male and female connectors plus female IDC connectors for ribbon cable systems).

15th March 2011
ERNI Electronics Expands its MicroSpeed Family With the Introduction of 90° Variants

ERNI Electronics has expanded its 1.0mm MicroSpeed connector family to include a 2-row 90° version in addition to the standard vertical male and female connectors designed for typical Mezzanine applications.

First Previous Page 3 of 3 Next Last

Featured products

Product Spotlight

Upcoming Events

View all events
Latest global electronics news
© Copyright 2021 Electronic Specifier