Companies

Ericsson Power Modules AB

Ericsson Power Modules AB Articles

Displaying 81 - 100 of 126
Power
13th July 2010
Ericsson’s Digital DC/DC Converter Goes Surface Mount To Save Board Space

Based on the company’s ground breaking BMR453 DC/DC converter, Ericsson Power Modules’ BMR453 SI version adds the company’s innovative Floating Inserted Pins (FIP) technology to offer a surface mount version that enables higher density boards to be designed and used.

Power
29th June 2010
Ericsson's Floated Inserted Pin Simplifies The Utilization Of High-Power Surface Mount Modules

Ericsson Power Modules' has introduced a surface mount version of its 380W PKM4000B module with an input voltage of 36 to 75V and an output of 12V/33A. The PKM4000B SI addresses the increasing need for surface mount versions to meet the ever-increasing space saving requirements demanded by applications and designers.

Power
24th June 2010
Ericsson's Ultra Wide Input Range Power Module Simplifies Power Radio Applications

Designed for systems powered by 24V or 48V batteries, Ericsson Power Modules' PKM5000D is a quarter-brick, isolated DC/DC converter that is optimized to deliver the highest efficiency across an ultra wide input voltage range of 18V to 75V. It is suitable for a very large range of applications in ICT, offering systems' designers the opportunity to use the same DC/DC converter for use in 24V and 48V systems, also to power remote-feeding application...

Power
27th April 2010
Ericsson's 1/8 Brick Converter Offers High Performance And Cost Efficiency

Based on a well established electrical platform used by Ericsson Power Modules in its original eight-brick PKB, the latest PKB-A series is design-optimized to deliver 30A or 125W with high efficiency throughout the operating range for applications requiring an average power of 100W. With the heritage of the PKB series combined with elements of the cost efficient PKM-E platform, the PKB-A has been designed to meld two important market requirements...

Power
24th March 2010
Ericsson Power Modules Is Recognised And Awarded For Its Dc/Dc Converter Accomplishments

Ericsson Power Modules has been awarded the 2009 World Vertical Market Penetration Leadership Award in the Board Mount DC-DC Converter market from global research organisation Frost & Sullivan. The Vertical Market Penetration Leadership Award is prestigious recognition of Ericsson Power Modules' accomplishments in the board mounted DC-DC converter market. It is an unbiased, third party recognition. The award is presented each year to the company...

Analysis
17th March 2010
Ericsson Receives Award In Recognition Of Its Performance In Clean Design

Ericsson Power Modules has received the 2009 Frost & Sullivan Green Excellence Award in Product Innovation in the World DC-DC converter market, recognizing Ericsson Power Modules as a leading manufacturer of miniature and high-density DC-DC power modules including DC-DC converters developing very advanced board-mounted power solutions while keeping very high focus on reducing environmental impact.

Power
12th March 2010
Ericsson's 1/8 Brick Power Module Optimizes 5V Bus Voltage To Match Load Requirement

Optimized for 5V intermediate bus voltages and other applications requiring a tightly regulated 5V supply, Ericsson Power Modules' BMR454 0002/004 is the latest variant of the 3E world's first digitally controlled, PMBus compliant, BMR454 DC/DC module that was launched last year.

Power
4th March 2010
ERICSSON adds FULL PMBUS READ AND WRITE CAPABILITY to VOLTAGE REGULATORS

Ericsson Power Modules' BMR450 and BMR451 point-of-load voltage regulators are now able to write as well as read data via the power management bus; PMBus. Customers buying these revision 2A products will have access to the internal memory of Ericsson's 3E point-of-load voltage regulators, providing high flexibility to program functional parameters to match specific profiles required by FPGA, ASIC, memories and other components. Revision 2A compli...

Power
18th February 2010
Ericsson's Evaluation Kit Unlocks The Power Of Its PMBus-enabled 3E Digital DC-DC Converters

Complementing Ericsson's 3E family of digitally-controlled intermediate-bus and point-of-load regulators, the 3E GUI Silver Edition evaluation kit makes it easy for engineers to monitor, program, and test the full range of BMR45x-series parts within a representative hardware and software environment. The kit's software package features a graphical user interface that is exceptionally easy to use, unlocking the power of these PMBus-programmable de...

Power
19th January 2010
Ericsson Power Modules and Power-One Enter Agreement on Digital Power Technology

In a worldwide agreement, Ericsson Power Modules has been granted a license on a patent portfolio for digital power technology (DPT) from Power-One. The non-exclusive license agreement provides Ericsson Power Modules with access to Power-One's portfolio of DPT patents for incorporation in Power Modules award winning series of 3E digitally controlled point-of-load devices.

Power
9th December 2009
Ericsson Power Modules among finalists at Elektra awards with its 3E digital power concept

Ericsson's 3E concept focuses on optimizing performance, flexibility and value for the end-user. 3E stands for Enhanced Performance, Energy Management, and End-user Value - the main benefits of the concept. Ericsson becomes the first company to offer a complete range of board-mounted-products based on digital control and monitoring, and in doing so, contribute to reduce energy consumption, and CO2 emissions.

Power
4th November 2009
Ericsson's 1/8 brick DC/DC converter optimized for power amps and cold-wall cooling environments

Designed to operate in sealed enclosures where cooling is not based on conventional forced-air cooling and fans, but via passive cold-wall technology in applications such as power-amplifiers and transceivers, Ericsson Power Modules' PKB4513PINBLC is a 50W eighth-brick DC/DC converter that powers 12V intermediate bus architectures.

Power
29th September 2009
Ericsson receives Chinese top 10 DC/DC award for its 1/8 brick digital power module

Ericsson Power Modules' BMR454 series of digital DC/DC converters has received a top 10 DC/DC award from Electronic Products China magazine, reflecting the company's expertise and commitment to energy efficiency.

Power
17th September 2009
Ericsson's expertise in digital power control to be showcased at dedicated DP forum

Ericsson Power Modules will present two papers at Darnell's sixth annual Digital Power Forum (DPF '09), to be held in Santa Ana, California, on September 21-23. Ericsson's Director of Marketing and Communications, Patrick LeFevre, will also run a demo of Ericsson's BMR453 and BMR454 digital power modules at the PMBus evening. LeFevre is also a panelist of the Round Table.

Power
3rd September 2009
Ericsson Power Module's POLA devices improve performance of power supplies

Based on the popular POLA platform, two point-of-load (POL) devices from Ericsson Power Modules provide easy paralleling making it possible for power servers and memory storage designers to access extremely flexible solutions for the next generation of low voltage supplies with very high DC currents approaching 100A.

Power
17th June 2009
240W wide-input range 1/8 brick module has digital interface for greater control

Ericsson Power Modules’ BMR454 DC/DC converter delivers double the power of most conventional eighth-brick modules that address a similar range of applications; a wide input voltage range of 36 to 75V, and a tightly regulated output. The BMR454 eighth-brick family delivers up to 240W with an efficiency rating up to 95% at full load and in an industry first, a PMBus interface is included.

Power
7th May 2009
Ericsson Power Block provides flexible, highly efficient power solution for processors

Addressing the emerging technology in power distribution and management called Centralized Control Architecture, Ericsson Power Modules has introduced a 30A Power Block. Specially designed to meet the demanding requirements of multiple power rails applications where cost, efficiency and flexibility are mandatory, the ROA1283003 is the perfect solution to power FPGA, and other processors.

Power
17th April 2009
Ericsson wins award for its digital DC/DC converter

Ericsson Power Modules has received an award from EDN magazine for its BMR453 DC/DC converter. This is the fourth time this product has received an award, highlighting its high level of innovation in improving energy efficiency and unprecedented levels of control via a digital platform.

Power
20th March 2009
Ericsson awarded for its digital DC/DC converter in China, confirming worldwide success

Ericsson Power Modules has received an award from Electronic Products China magazine for its BMR453 DC/DC converter. Presented annually, Electronic Products China's ‘Product of the Year’ award is given to products that show significant progress in technology, innovative design or offer distinct price/performance improvements compared to competing devices.

Power
3rd March 2009
Ericsson's 3E digital power solution reduces power consumption

Ericsson Power Modules has announced its 3E concept. 3E stands for Enhanced Performance, Energy Management, and End-user Value, the main benefits of the solution. With its 3E power solution, Ericsson claims to be the first company to offer a complete range of board-mounted-products based on digital control and monitoring, and in doing so, contribute to reduce energy consumption, and CO2 emissions.

First Previous Page 5 of 7 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier