Dengrove Electronic Components

Address:
The Stables,Grange Mill Farm
Old Linslade Road
Heath & Reach
Beds

LU7 ODU
United Kingdom

Phone: 01525 237731

Web: www.dengrove.com


Dengrove Electronic Components articles

Displaying 1 - 20 of 57

DC/DC converters offer space-saving solution

DC/DC converters offer space-saving solution
Now available from Dengrove Electronic Components, RECOM R2SX 2W isolated DC/DC converters measure only 15.24mm x 10.7mm x 8.0mm, delivering a space-saving solution for bus isolation and general industrial power applications.
11th September 2019

Reference designs aid UK RIA12 compliance

Reference designs aid UK RIA12 compliance
Two railway power supply reference designs from RECOM, available now at Dengrove Electronic Components, solve engineering challenges including filter layout for EN 50121-3-2 EMC compliance and surge prevention meeting the UK RIA12 specification.
23rd August 2019

Surface-mount line inductors simplify EMC compliance

Surface-mount line inductors simplify EMC compliance
Power supply designers facing EMC-compliance challenges are being offered the latest RLS series of surface-mount line inductors from RECOM by distributor Dengrove Electronics Components.
31st July 2019


DC/DC converters save board space

DC/DC converters save board space
For cost-sensitive applications where board space is at a premium, Dengrove Electronic Components has the new RECOM REC15E-Z isolated DC/DC converters featuring a 4:1 input-voltage range and compact 1”x1” footprint with built-in protection.
28th June 2019

DC/DC converters are compliant with DOSA footprint

DC/DC converters are compliant with DOSA footprint
For applications that require high power density and high efficiency, Dengrove Electronic Components is stocking RECOM RPM3.3 and RPM5.0 non-isolated DC/DC converters in power ratings from 3.3W to 30W. Compliant with the industry-standard 12.19mm x 12.19mm DOSA footprint, the 3.3V and 5.0V modules are available with rated output current of 1.0A, 2.0A, 3.0A, or 6.0A.
14th March 2019

DC-DC converters drive capacitive loads of up to 1000µF

DC-DC converters drive capacitive loads of up to 1000µF
Now available from Dengrove Electronic Components are RECOM’s R1DX dual-output isolated DC-DC converters offering a choice of ±5V, ±9V, ±12V or ±15V bipolar outputs. These open-frame, surface-mount power modules are convenient and compact, measuring just 15.2mm x 10.7mm and only 8.0mm high.
9th January 2019

Buck-boost converter shielding enhances thermal performance

Buck-boost converter shielding enhances thermal performance
Packaged as a 25-pad LGA with 6-sided shielding, the RECOM RBB10 buck-boost converter, now available from Dengrove Electronic Components, is ideal for equipment such as USB voltage regenerators, 3.3V-to-5V converters, and supercapacitor or Li-Ion battery regulators.
29th November 2018

AC/DC power supplies aimed at IoT, industrial applications

AC/DC power supplies aimed at IoT, industrial applications
RECOM encapsulated RAC AC/DC power supply modules from Dengrove Electronic Components are perfect for space-constrained applications that need great light-load efficiency and low standby power. Ideal for industrial controls, IoT infrastructure, smart-building devices, and household appliances, the range comprises 5W, 10W, 15W and 20W options.
30th October 2018

Evaluation board simplifies upgrade for wireless sensors

Evaluation board simplifies upgrade for wireless sensors
The latest RECOM evaluation board for the 3.3V R-78S boost converter enables small battery-powered wireless devices to run for longer. It is available at Dengrove Electronic Components. The R-78S Evaluation Board (R-78S3.3-0.1-EVM-1) maximises run-time by generating a regulated 3.3V output as the battery discharges to as low as 0.65V.
31st July 2018

Input DC/DC converter designed for high voltage systems

Input DC/DC converter designed for high voltage systems
  The ultra-wide input voltage range of the latest DC/DC converters from Dengrove Electronic Components gives extra flexibility when designing equipment to be powered from high voltage batteries, or to operate from various different standardised supply voltages.
26th March 2018

AC/DC power supplies offer medical 2-MOPP isolation

AC/DC power supplies offer medical 2-MOPP isolation
The latest RECOM RACM series 18W and 30W AC/DC power supplies, now available at Dengrove Electronic Components, have medical 2-MOPP isolation. They come in a compact, IP68-rated, encapsulated, plastic housing, and require no additional external components to meet Class-B emission limits.
18th January 2018

AC/DC converters target IoT applications

AC/DC converters target IoT applications
Described as the perfect power supplies for small IoT devices and industrial controls, Dengrove Electronic Components has released the RECOM RAC05-K series of highly integrated 5-Watt AC/DC converters.
18th December 2017

DC/DC Converters provide power for high-performance SiC gate drivers

DC/DC Converters provide power for high-performance SiC gate drivers
  Engineers working with silicon carbide (SiC) MOSFETs can overcome design challenges and increase system reliability with the latest DC/DC converters from Dengrove Electronic Components, which are designed specifically for powering high-slew-rate gate drivers.
9th November 2017

DC/DC converters aid system reliability

DC/DC converters aid system reliability
Engineers working with silicon carbide (SiC) MOSFETs can overcome design challenges and increase system reliability with Dengrove Electronic Components’ DC/DC converters. These are designed specifically for powering high-slew-rate gate drivers. SiC MOSFETs are increasingly chosen for the inverters of wind-turbine or solar power-conditioning systems, or variable-speed motor drives in appliances and machine tools, to boost efficiency and reliability.
2nd November 2017

DC/DC converter saves space energy and time

DC/DC converter saves space energy and time
Ready to save space in medical-device designs, the RECOM REM1 series, now available from Dengrove Electronic Components, is a 1W DC/DC converter family certified to medical IEC/EN/ANSI/AAMI 60601-1 and general IEC 62368-1 equipment safety standards. The series is also covered by a CB Test Report, which simplifies access to international markets.
13th October 2017

DC/DC converters drive capacitive loads up to 2200µF

DC/DC converters drive capacitive loads up to 2200µF
At only 5.5mm high, the latest RECOM R1SX 1W unregulated DC/DC converters, available now at Dengrove Electronic Components, are 20% slimmer than alternative converters, and are packaged as compact, 12.75mm x 10.8mm, surface-mount, open-frame modules. In addition to satisfying EN 55022/024 and IEC/UL/EN 60950-1, the modules are certified to the incoming IEC/UL/EN 62368-1 safety specification.
17th August 2017

DC/DC converters drive high capacitive loads

DC/DC converters drive high capacitive loads
The REC3A, REC5A and REC6A isolated DC/DC converters from RECOM are now available at Dengrove Electronic Components. They require no external filter components to pass EN 55022 class-A EMI tests. They will also pass the class-B tests for domestic products, with only a small capacitor added.
5th July 2017

Switching regulators operate at up to 93% efficiency

Switching regulators operate at up to 93% efficiency
A range of boost switching regulators that enable designers to power devices such as microcontrollers, radio modules, or energy-conscious IoT systems at up to 100mA for long periods from a single 1.5V cell is available at Dengrove Electronic Components. The RECOM R-78S 0.33W regulators ensure longer lifetime by maintaining a stable 3.3V output as the battery discharges as low as 0.65V.  
9th June 2017

Compact DIN-rail power supplies boost productivity

Compact DIN-rail power supplies boost productivity
New DIN-rail power supplies available from Dengrove Electronic Components can deliver up to 50% above rated power, which enables equipment to operate continuously during short-term overloads avoiding disruptive shutdown-reset, and allows designers to satisfy high system-demand peaks using smaller, lower-cost power supplies.
5th April 2017

DC/DC converters meet wide range of standards

DC/DC converters meet wide range of standards
The portfolio of EN50155-compliant DC/DC converters at Dengrove Electronic Components is extended with the RECOM RPA120H-RW, which delivers up to 120W in the industry-standard half-brick footprint of 61.0mm x 57.9mm. In addition to satisfying EN50155, the harmonised European standard covering electronic equipment for railway rolling stock, the RPA120H-RW also complies with the UL and IEC/EN 60950-1 industrial safety specifications and is therefore suited a wide range of communication, control and monitoring applications.
20th December 2016


Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

Connected World Summit 2019
22nd October 2019
United Kingdom The Business Design Centre, London
Hotspots Specials 2019
24th October 2019
Germany Böblingen, Germany
IoT Solutions World Congress 2019
29th October 2019
Spain Barcelona
Maintec 2019
30th October 2019
United Kingdom NEC, Birmingham
NOAH Conference 2019
30th October 2019
United Kingdom Old Billingsgate, London