Bruel & Kjaer UK Ltd

  • Jarman Way Royston Hertfordshire
    SG8 5BQ
    United Kingdom
  • +44 1223 389 918
  • +44 01223 389919

Bruel & Kjaer UK Ltd Articles

Displaying 21 - 40 of 71
Test & Measurement
8th May 2013
Put smart recording in the driver's seat - Sonoscout NVH Recorder

An intuitive new sound and vibration recorder lets engineers analyse their measurements on the go, using an iPad to manage data and listen to recordings. Using the portable Sonoscout system, engineers can validate recordings in real-time, to remove the risk of recording bad data and then having to repeat expensive testing.

Test & Measurement
18th February 2013
Outdoor Noise Measurement With Integrated Weather Parameters

Outdoor noise measurements are now fully supported in Brüel & Kjær’s Type 2250, 2270 and 2250L sound level meters, with a new Weather Station Kit for measuring noise and weather parameters simultaneously. Weather conditions significantly affect the propagation of sound and therefore affect measured noise levels.

Test & Measurement
28th January 2013
Amp It Up With Brüel & Kjær

Brüel & Kjær has launched the world’s first preamplifier and preamplifier/microphone combinations to withstand temperatures up to 125 degrees. The high-temperature 1706 Microphone Preamplifier enables engineers to make acoustical measurements, nearer to the sound or noise source of hot devices, such as engines and gas turbines.

Test & Measurement
18th December 2012
180°C universal accelerometers from Brüel & Kjær

Brüel & Kjær has released a new CCLD accelerometer, Type Type 4527, that can operate at a continuous temperature of 180°C, making it ideally suited for automotive powertrain uses. Type 4527 has wide dynamic, frequency and temperature ranges, making the transducer well-suited to general-purpose use. It has low sensitivity to electro-magnetic interference due to low output impedance and also features a very low noise floor. All o...

5th December 2012
Thanks for 70 years of driving innovation

In the last 70 years, Brüel & Kjær systems have measured sound on the International Space Station and ensured all of NASA‘s Mars rovers survived the journey there. Our accelerometers have turned the Golden Gate Bridge into a giant harp and helped maintain hydroelectric generators around the world, while our world-leading microphones and hydrophones have investigated everything from submarines off Sweden to the pressure in Boeing’s wind tunn...

Test & Measurement
27th November 2012
Vehicle simulator improves Commercial Vehicle Group’s test capabilities

A Desktop Noise Vibration Harshness (NVH) Simulator has vastly improved Commercial Vehicle Group’s (CVG) customer relations and jury testing capabilities.

12th November 2012
Join Brüel & Kjær’s 70th anniversary celebration

The roar of a car’s engine and the feel of the ride; the clear audio of a hearing aid; the drone of planes from a busy airport; the quality of a mobile phone. Sound and vibration is all around us and constantly affects our lives. Helping people solve their sound and vibration challenges is in the DNA of Brüel & Kjær - just like our iconic green instruments and our red shakers.

Test & Measurement
5th November 2012
Brüel & Kjær launch Version 4.1 software update for its hand-held analyzers

Brüel & Kjær has launched a software update for its hand-held analyzers - Version 4.1. Designed for the company’s 2250, 2270 and 2250 Light hand-held analyzers - and their PC software ‘Measurement Partner Suite’ - the new version 4.1 is the first feature update of Brüel & Kjær’s fourth generation (G4) hardware and software, which was launched in April 2012.

16th October 2012
Bruel & Kjaer release comprehensive course calendar

Bruel & Kjaer UK has added a new noise and vibration control training course for 2013. These acoustic requirements are imposed by more stringent regulations and can only be met by considering noise and vibration control as an integral part of the product creation process, which in turn puts tremendous pressure on the industrial design engineer.

Test & Measurement
20th September 2012
Applus IDIADA invest in PULSE Vehicle Pass-by Test System

Automotive engineering expert, Applus IDIADA has expanded its measurement capabilities with a full pass-by system from Brüel & Kjær, for testing both ground operation and in-vehicle (one-man) operation.

Test & Measurement
4th September 2012
Angular analysis, structural correlation and more with Brüel & Kjær’s PULSE 17

For vehicles and powertrain engineers, PULSE 17 brings important developments, with new angular analysis software providing a new post-processing application for analysing sound and vibration in the angle domain. Primarily designed for crank-angle analysis of internal combustion engine/powertrain systems, it can however be used to analyse any rotating system where cyclic phenomena need to be investigated.

23rd August 2012
Brüel & Kjær Sound & Vibration A/S acquires NoViSim to consolidate its position in Simulation and NVH decision making

The move brings on board the NVH Simulator and SoNoScout products as well as the development team that produced them, adding a wealth of signal processing and automotive NVH knowledge to the company. “Our long association with many automotive companies has allowed us to develop unique solutions to the difficult issues facing NVH engineers,” said Mark Allman-Ward of NoViSim. “Being part of Brüel & Kjær Sound & ...

18th July 2012
Brüel & Kjær simulator drives Magneti Marelli's automotive development

Magneti Marelli is a tier-one supplier to automotive manufacturers throughout the world, developing components such as exhaust systems to exacting specifications and targets.

4th July 2012
Brüel & Kjær and Sikorsky sign Memorandum of Understanding

Brüel & Kjær and Sikorsky Aircraft Corporation have signed a Memorandum of Understanding to strengthen industrial cooperation between the two companies. Sikorsky are bidding their MH-60R Seahawk helicopter to replace the Danish military Lynx helicopters. The MOU is conditioned on the decision by the Danish government to procure the Seahawk.

Test & Measurement
3rd July 2012
Brüel & Kjær’s radiation-resistant accelerometers

Vibration measurements in harsh industrial environments is much easier for engineers with Brüel & Kjær’s new Type 8347-C Accelerometer. The Type 8347-C accelerometer can withstand temperatures ranging from -196°C (-321°F) to +482°C (+900°F) and has high resistance to radiation.

Test & Measurement
11th June 2012
Breakthrough 4G phone quality system from Brüel & Kjær and Agilent Technologies

A new system for testing the next generation of 4G phones that use Voice-over-LTE technology has been developed by Agilent Technologies and Brüel & Kjær. “The Agilent and Brüel & Kjær solution enables operators and smartphone developers to make highly reliable and integrated Voice-over-LTE audio quality measurements,” said Andy Botka, Vice President and General Manager of Agilent's Microwave and Communications Division.

Test & Measurement
14th May 2012
Noise measurements to finished report: The fastest route

Measurement Partner Suite is the free, new post-processing software for Brüel & Kjær’s sound level meters and hand-hand analyzers. For the first time, Brüel & Kjær now includes post-processing functionality in the same program that users upload their data to.

14th May 2012
Brüel & Kjær sponsors aerospace laboratory at Virginia Tech

Virginia Polytechnic Institute and State University has opened their new ‘Brüel & Kjær Laboratory for Aerospace Vibration and Acoustics’. The laboratory is part of Virginia Tech’s new National Institute of Aerospace (NIA) Research and Innovation Laboratories in Hampton, Virginia. It contains state-of-the-art instrumentation and equipment for measuring and analyzing vibration and sound, and is sponsored by Brüel & Kjær.

Test & Measurement
20th March 2012
Shorten time-to-market with Test-FEA integration

Brüel & Kjær offers advanced test-to-Finite Element Analysis (FEA) tools to help vehicle manufacturers speed up their time-to-market process.

7th March 2012
Bruel & Kjaer VTS at Best Factory Awards Conference

Brüel & Kjær Vibration Test Systems will be presenting one of the sessions at at this year’s Best Factory Awards Conference, running on 27th and 28th March at Chesford Grange, Kenilworth. Managing Director, Dr Lawrence Grasty and Head of Operations Bruel & Kjaer Royston, Andrew Turner will host a session focusing on “Agility and workforce ability” - describing how the vibration test systems manufacturer cut inventory, which resulted in a ...

First Previous Page 2 of 4 Next Last

Featured products

Upcoming Events

View all events
Latest global electronics news