Anritsu EMEA Limited
Changing now, to change the future.
On the occasion of the 120th anniversary of its founding, Anritsu is taking on the challenge of innovation for the next generation.
Anritsu EMEA Limited Articles
LG Electronics Demonstrated LTE USB Modem Performance Using Anritsu LTE Instruments
Anritsu Corporation announced that the Anritsu MD8430A LTE Signaling Tester and MX786201A Rapid Test Designer (RTD) software has been selected by LG Electronics (LG) as a primary test solution for device development, integration, and performance testing.
Strengthened Measurement Solution for Active Optical Devices
Anritsu Corporation announces the launch of its new high-speed, easy-to-use, MS9740A Optical Spectrum Analyzer the perfect measurement solution for higher productivity on active optical device manufacturing lines.The MS9740A is designed to measure the output characteristics of active optical devices used in optical communications systems. It features the high speeds required by makers of active optical devices used in optical communications, such...
Anritsu Introduces Microwave USB Power Sensor With Coverage up to 26 GHz Over 60 dB Dynamic Range
Anritsu has introduces the MA24126A Microwave USB Power Sensor that can make highly accurate power measurements from 10 MHz to 26 GHz over 60 dB of dynamic range. The sensor employs a “dual path” architecture that provides True-RMS measurements over a broad frequency range and a dynamic range of 0.1 µW to 100 mW (-40 dBm to +20 dBm), allowing engineers and field technicians to conduct average power measurements on CW, multi-tone, and digital...
Anritsu Enhances Handheld Analyzers’ W-CDMA and HSDPA Measurement Capability
Anritsu Company introduces options for its BTS Master MT8222A and Spectrum Master MS272xB series that expand the analyzers’ measurement capability on W-CDMA and HSDPA signals. The new options complement the handheld analyzers’ existing measurement capability, and allow field engineers and technicians to conduct W-CDMA and HSDPA measurements faster and more efficiently during the installation and maintenance of wireless networks.
Leading players in the Test industry working to enable Test capability for certification of next generation mobile devices
Anritsu and CETECOM have revealed to the industry their efforts and co-operation to enable Certification testing of the new generation ‘LTE’ mobile devices. As the expected launch dates in 2010 for LTE networks come closer, and various suppliers reveal plans and trials results for LTE devices, the test industry has shown that they are also prepared for the certification process for the launch of LTE devices.
Key enhancement for TD-SCDMA handset testing focused towards China mobile phone market, including GSM handover capability
Anritsu Corporation has further enhanced the functions of its MD8470A Signalling Tester to support R&D and verification of TD-SCDMA mobile terminals. The October 19 rollout of its TD-SCDMA/HSPA Signalling Unit along with the new TD-SCDMA/GSM Simulation Kit and TD-HSPA Software options has enabled this new capability. These test equipment options are supporting the 3.5G TD-SCDMA/HSDPA*1 high-speed data communications standard that is spreading rap...
Anritsu - Next-Generation Field OTDRs Generation
Anritsu Company, a global provider of test and measurement solutions for advanced and converged networks, introduces its ACCESS Master MT9083C high-performance OTDR Series. The MT9083C series delivers the best optical performance in the 45 dB mini-OTDR class with industry-leading resolution and the fastest measurement distance acquisition for mid- to long-range (>40 km) networks, providing field personnel with a test solution to accurately and qu...
Anritsu demonstrates a 3G LTE Virtual Network Demo
A 3G LTE test system which creates a virtual 3G LTE network will be displayed in Japan this week. Anritsu will display the system at CEATEC JAPAN 2009 running until 10th October in Chiba-city.
Anritsu Extends Frequency Range of VectorStar 4-port Solutions to Measure Passive High-Speed Balanced Transmission Lines and Connections
Anritsu Company has announced it has extended the low-end frequency of its MN469xB VectorStar 4-port test sets, making the instruments the first microwave multiport Vector Network Analyzer (VNA) solutions to measure down to 70 kHz.
Anritsu appoints Orbis as a Certified Service Partner for Site Master products in Finland, Sweden and the Baltics
Anritsu has appointed Orbis as a certified service and calibration partner for Site Master products in Finland, Sweden and Baltic countries. Customers in these regions can now benefit from a local Anritsu certified service centre for their Site Master products.
New test solutions to support development of next generation 40G/100G communications networks
Anritsu Corporation meets the demands of testing the technology for next generation communications networks as it introduces the new 56Gbit/s MUX/DEMUX modules to its MP1800 Signal Quality Analyzer.
Anritsu - Full Suite of LTE Base Station Measurements for Handheld Analyzers
Anritsu has introduced a comprehensive LTE base station measurement suite that allows field engineers and technicians to conduct tests necessary for the proper deployment, installation, and operation of LTE networks. The measurement suite is a set of optional measurement capabilities for Anritsu’s industry leading MS272xB Spectrum Master, and MT8222A and MT8221B BTS Master handheld analyzers that includes tests for RF signal parameters, modulat...
Anritsu Enhances DVB-T/H Digital Video Measurement Capability in Handheld Analyzers
Anritsu has announced enhanced DVB-T/H measurement capability for its industry leading MT8222A BTS Master and MS2721B Spectrum Master handheld products. The enhancements build off the measurement capability of the first version of DVB-T/H measurement capability by offering a more intuitive and streamlined graphical user interface (GUI), a minimum 40% measurement speed improvement and better compatibility of stored measured data.
Anritsu - LTE Device and Testing
In July, Anritsu and a leading device manufacturer in South Korea successfully demonstrated end-to-end LTE calls over an air interface. Over the last few months a number of mobile network operators have declared intent to roll-out LTE networks, starting from 2010. A frequently quoted barrier to this has been the availability of suitable devices and test equipment, but now there is good reason to be optimistic.
Anritsu Redefines Wireless Field Test with Introduction of ‘E’ Platform for Handheld Analyzer Family
Anritsu continues its leadership position in the wireless field test market with the introduction of an innovative new platform for its family of handheld analyzers, which is the de facto industry standard for field test instrumentation. The new platform features integrated functionality in a robust, lightweight, field-proven design that provides field personnel with all the tools necessary to deploy, maintain, and troubleshoot today’s most dem...
Configuration Replaces Multiple Instrument Alternatives to Reduce Cost and time of Test, and Lower Setup Costs
Anritsu Company introduces the MU150110A multi-rate/multi-channel unit for its MP1590B Network Performance Tester. The plug-in unit creates a single-instrument 10G transport test solution with the MP1590B mainframe and allows the tester to accurately evaluate the performance of SDH/SONET, OTN, and PDH/DSn equipment from 1.5M to 11.1G, as well as 10GbE interfaces during development and manufacturing.
Dedicated Bluetooth Audio Test Set Introduced by Anritsu Company
Anritsu Company introduces the MT8855A, the world’s first integrated test set capable of measuring the new generation of products using the Bluetooth Advanced Audio Distribution Profile (A2DP), headset profile, and hands-free profile. Providing frequency coverage of 20 Hz to 20 kHz, the MT8855A offers lower cost-of-test, significantly reduced development time, and greater confidence in the quality of products shipped compared to alternative mul...