Companies

ACAL Technology Limited

  • 3 The Business Centre Molly Millars Lane Wokingham Berkshire
    RG41 2EY
    United Kingdom
  • +44 (0) 1189 788878
  • http://www.acaltechnology.co.uk
  • +44 (0) 1189 776095

ACAL Technology Limited Articles

Displaying 61 - 80 of 83
Analysis
29th October 2009
Acal Proposes Acquisition Of Bfi Optilas S.A.S.

Acal has announced that it has agreed to acquire the entire issued share capital of BFi OPTiLAS (the “Acquisition”). BFi OPTiLAS is a private specialised distributor of electronic and photonic components, modules and systems across Europe, as well as supplying value-added calibration and maintenance services. BFi OPTiLAS will be acquired for a consideration of €10 million payable in cash and 2 million Acal ordinary shares to be issued on co...

Communications
16th October 2009
ACAL Technology - Reliable force sensing

The FSS-SMT Series, a low profile surface mount device that allows for automated assembly on a printed circuit board (PCB), often eliminating hand soldering and helping to reduce assembly costs. Cost-conscious customers will be attracted to the FSSSMT Series because it provides all four points of the Wheatstone bridge sensing element that gives them the flexibility to customize and integrate the sensor into other system electronics.

Communications
12th October 2009
ACAL Technology samples small Linux networking server

ACAL Technology announces samples of the world’s smallest, self-contained Linux networking server. Building on proven Lantronix XPort technology, XPort Pro is a production-ready server which operates on the Linux or Evolution OS operating systems. In addition to being the world’s smallest Linux networking server, XPort Pro also features a significant increase in on-board memory of 8MB SDRAM/16MB Flash, compared to the 256kB of current-generat...

Memory
4th August 2009
ACAL Technology cuts SRAM lead-times and future-proofs designs against loss of supply

ACAL Technology announce a new cross-matching service designed to eliminate extended lead-times for high-speed SRAM, and to future-proof designs by second-sourcing fit, form and function alternatives to virtually any existing SRAM.

Communications
24th June 2009
HARTING's compact industrial Ethernet switch connects up to 16 ports

A new compact industrial Ethernet switch from HARTING connects up to 16 ports in a compact 120 x 105.4mm footprint. Combining one of the smallest footprints with auto-negotiation, auto-polarity and auto-crossing functions for easy plug and play installation, the HARTING eCON 2160-A is designed for high-demand industrial networks. The unmanaged switch operates in store and forward switching mode and integrates a LED on each port for fast network...

Frequency
13th May 2009
Sub-miniature surface-mount crystals for space-constrained applications

ACAL has announced the availability of new sub-miniature surface-mount crystals which support the growing demand for stable and accurate RF clocking in portable or handheld wireless and other space-constrained applications.

Cables/Connecting
29th April 2009
Waterproof Ethernet connectors offer full EMI shielding

ACAL Technology announce the immediate availability of sample and production quantities of Bulgin’s full range of waterproof Ethernet connectors, including a new metal EMI-shielded backshell for use in applications with high levels of electrical noise in addition to harsh operating conditions.

Analysis
21st April 2009
ACAL Technology sign Honeywell Precision Sensors

ACAL Technology has announced the signing of a pan-European agreement to distribute Precision Magnetic and Pressure Sensors products from Honeywell. The agreement introduces magnetic and pressure sensors to ACAL’s linecard and follows increased demand from customers for sensors for use in applications such as GPS-enabled or other navigation products, as well as in air data systems, unmanned vehicles, test and measurement, and process control.

Analysis
6th November 2008
ACAL announces immediate availability of SiliconSystems drop-in replacements for end-of-life Solid State Storage products

Available immediately from ACAL Technology are three drop-in replacement from SiliconSystems for end-of-life solid-state drive (SSD) products recently announced by other manufacturers, with added enhancements that include patented PowerArmor, which provides protection from power fluctuations that can corrupt the data on competitive products, and SiSMART, which is a convenient way to determine the remaining in-service life of the drive.

Power
6th August 2008
1340W Configurable Power Supply Is Only 1U High

Now available through ACAL Technology - the new Xcite 1340W modular power supply from Excelsys Technologies, the world leading specialists in high efficiency configurable power supplies. Just 1U high and 268mm x 127mm the Xcite boasts industry leading 16W/in² power density with up to 90% efficiency and an innovative “plug and play” architecture which allows users to configure a custom power solution in less than 5 minutes.

Analysis
8th January 2008
ACAL Technology sign exclusive pan-European agreement following RFMD acquisition of Sirenza/PDI/Microlinear

ACAL Technology have been named by RFMD as their exclusive pan-European distribution partner in 13 European countries following RFMD’s acquisition of Sirenza Microdevices/PDI/Microlinear. The agreement covers the UK, France, Germany, Austria, Switzerland, Italy, Netherlands, Belgium, Luxemburg, Sweden, Denmark, Norway and Finland.

Passives
29th November 2007
Ferrite Chip Beads from NIC

The NCB series provides current ratings up to 6 amps in standard EIA case sizes from 0402 to 1812. The NCB-H series is rated for currents up to 5 amps in case sizes from 0603 to 1812. Both series provide high impedance over a wide frequency range and operate in temperatures from minus 40 to +125 degrees Centigrade. They are compatible with automated pick-and-place equipment and can be soldered with either flow or reflow techniques.

Passives
1st November 2007
EMI suppression capacitors from EPCOS

ACAL Technology has announced compact Y2 EMI suppression capacitors from EPCOS. Connected to protective ground between the neutral conductor and phase to suppress high-frequency interference and transients, they protect the equipment and allow it to operate reliably. Typical applications include power supplies and household appliances. The Y2 capacitors offer a rated AC voltage of 300 VAC and a temperature stability of 110 °C. Their design en...

Analysis
17th October 2007
ACAL Technology and Integration Associates Inc in distribution agreement

A new franchise agreement between ACAL Technology, and Integration Associates Inc., brings ACAL-level design support, on Integration’s wireless, wired and power management ICs, to customers in the UK and France.

Analysis
4th October 2007
ACAL Technology signs Wolfson Microelectronics

ACAL Technology has signed a technical distribution agreement for the UK, Ireland and Benelux with Wolfson Microelectronics for its mixed-signal IC range. This agreement covers inventory and technical support for geographic accounts and is complementary to the existing Wolfson direct sales force, enabling Wolfson to extend its reach to a broader customer base in the region.

Analysis
22nd August 2007
New online resource centre simplifies Ferrite selection

ACAL Technology and EPCOS announce an extensive, new online resource which simplifies and speeds the selection process for ferrite components. The new ferrite design centre at www.acaltechnology.co.uk/ferrites features a free design tool as well as comprehensive information on ferrite materials, data on all EPCOS ferrites and accessories, and a list of ACAL Technology’s inventory of EPCOS ferrites.

Passives
6th July 2007
High-current contactor is the smallest, lightest and lowest-cost in its class

ACAL Radiatron announces the immediate availability of the industry’s smallest and lowest-cost high-current, sealed contactor rated for operation up to 500 amps. Weighing just 0.43kg, the Kilovac EV200 is also the lightest product in its class.

Passives
2nd April 2007
Electrolytics withstand reflow soldering to +260°C

New surface-mount V-chip aluminium electrolytic capacitors from ACAL Components are designed to withstand reflow soldering to +260°C. Manufactured by NIC Components, the six new families of liquid electrolyte, aluminium capacitors are compatible with the Sn-Ag-Cu (SAC) alloy lead-free soldering process which has emerged as the industry-standard replacement for Sn-Pb solder alloys for RoHS-compliant products.

Analysis
15th February 2007
ACAL Semiconductor partners with SiliconSystems™ in new Franchise Agreement

ACAL Semiconductors today announced that they have signed a franchise agreement to partner with SiliconSystems™ Inc, a world leader in advanced storage technology engineered exclusively for the Enterprise System OEM market, to provide Solid-State Disc (SSD) storage systems for customers in the UK.

Analysis
24th October 2006
New General Manager for Acal Components

ACAL Components announces the appointment of Louise Early as General Manager for Passive, Inductive & Battery Products. Early will head the team selling a strong mix of products which includes the ACT range of batteries, the complete spectrum of capacitor and resistor technologies, as well as inductive products such as baluns, coils, EMC filters, transformers, ferrite cores and chip beads.

First Previous Page 4 of 5 Next Last

Product Spotlight

Upcoming Events

View all events
Newsletter
Latest global electronics news
© Copyright 2024 Electronic Specifier