EtherCAT slave controller is first to integrate RT, latency-free I/O peripherals

18th August 2015
Posted By : Barney Scott
EtherCAT slave controller is first to integrate RT, latency-free I/O peripherals

TRINAMIC has announced an EtherCAT-compliant slave controller IC. It is the world’s first EtherCAT slave controller to integrate real-time, latency-free I/O peripherals. The TMC8460 slave controller is also the first device in an EtherCAT-compliant interface product line currently under development at TRINAMIC, based on the company’s active membership in the EtherCAT Technology Group.

TRINAMIC’s TMC8460 is the first EtherCAT slave controller IC to incorporate PWM and Step/Dir I/O peripherals that do not require routing through the firmware of an application processor, eliminating latency for applications requiring real-time response. The TMC8460 extends the feature set of the core EtherCAT technology with a broad array of peripherals and features: an integrated smart peripherals block accessible from an MCU or EtherCAT master and, in addition to a PWM unit and Step/Dir interface, an SPI master and encoder interface that can be directly mapped to the PDO (Process Data Object) by the memory manager. This unique SPI interface enables latency-free read from an ADC or write to a DAC.

The IC includes a standalone mode that enables direct mapping of integrated peripherals to bus registers, while in parallel an external MCU can perform higher layer protocol operations. To enable wide interoperability, the TMC8460 communication hardware has been verified as 100% compatible with the existing Beckhoff EtherCAT Slave controller through extensive interoperability testing.

"TRINAMIC has a well-established track record of delivering embedded motor drives with high-level bus interfaces for the industrial motion control market. We’re now responding to the increasing demand for EtherCAT support as this standard gains traction around the world,“ explained Michael Randt, CEO, TRINAMIC. “We are meeting an increasing demand for cutting-edge, real-time operation where jitter and latency caused by routing process data through a protocol stack is not accepted. So we decided to directly connect our EtherCAT slave controller to the motion control specific peripherals."

EtherCAT is a widely adopted communication protocol for industrial applications. Its flexible topology is uniquely suited for complex industrial deployments, which has attracted more than 3,000 member companies worldwide to endorse the standard. As an exceptionally stable standard that industrial developers can rely on for long life cycle products, EtherCAT continues to utilise the same interface first established in 2004, even as the protocol has continued to evolve.

Like all TRINAMIC devices, the TMC8460 benefits from TRINAMIC’s comprehensive development eco-system, called “Landungsbrücke”, which includes evaluation boards, reference designs and, for this device, sample EtherCAT software stacks for Cortex MCUs. All configuration and parameterisation tools are incorporated into TRINAMIC’s IDE. The device can be used with any MCU that comes with an SPI interface, or standalone in SPI emulation mode.

The TMC8460 is priced at $0.50 each in 1,000 unit volumes. The device comes in a BGA VFGG400 package. Components and evaluation boards are available for shipment in August 2015. The device meets the -40 to +125°C industrial temperature specification.


You must be logged in to comment

Write a comment

No comments




More from Trinamic Motion Control GmbH

Sign up to view our publications

Sign up

Sign up to view our downloads

Sign up

IoT Tech Expo 2019
25th April 2019
United Kingdom Olympia, London
Ceramics Expo 2019
29th April 2019
United States of America International Exposition Center (I-X Center)
PCIM 2019
7th May 2019
Germany Nürnberg Messe
Electronics & Applications 2019
14th May 2019
Netherlands Jaarbeurs Utrecht Hall 7 Jaarbeursplein
Agile for Automotive 2019
15th May 2019
United States of America Detroit, MI