Solderless terminals and splices from Tyco Electronics

18th March 2008

ES Admin

0 0

The new range of pre-insulated, solderless Euro-Crimp terminals and splices from Tyco Electronics provides reliable, low cost and easy terminations for wire sizes 0.5sqr – 6.0sqr (22AWG – 10AWG) and is ideally suited to meet the cost and performance requirements of a wide range of commercial applications.

Euro-Crimp terminals and splices consist of precision formed metal wire barrel insulated with PVC and benefit from a continuous maximum operating temperature of 75 degrees Celsius. The devices are designed for single applications featuring solid or stranded wire. The insulation allows insertion of wires with a maximum voltage rating of up to 600V. Tyco Electronics’ F crimp termination ensures life long performance

The colour coded vinyl insulation by wire size of all Euro-Crimp terminals and splices enables easy identification. In addition, terminals are marked with the respective wire size range on the tongue. Serrations inside the wire barrel provide maximum contact and tensile strength after crimping. Terminals suitable for mounting accept stud sizes M3 through to M12.

Euro-crimp terminals and splices are available in loose-piece for terminating with manual hand held tools and come packed either in bulk or re-sealable dispensing plastic containers for in-field installation. All common versions of the components are UL listed under File E13288 with full CSA and VDE approvals expected late Spring 2008.