Power interface connectors with crimp termination

31st October 2011

ES Admin

0 0

HARTING has introduced new crimp termination versions of its Han(R) Q 2/0 family of high-voltage power interface connectors. The connectors use HARTING's proven Han(R) C power contacts in the cross-section range from 1.5 mm2 to 10 mm2 or 16 AWG to 8 AWG. The performance of this range of connectors makes them suited to a wide range of industrial applications including drives and controls, automotive engineering and rail technology.

The standard Han(R) Q 2/0 version has a rated voltage of 400 V at a nominal current of 40 A, while the higher-voltage version offers a rated voltage of
830 V to satisfy more demanding applications.

The connector pairs are plug-compatible with the existing axial screw termination models, in spite of the different termination technology. This enables the use of combinations such as a male insert with crimp contacts on the device side and a female insert with axial screw contacts on the cable side.

Users also have a full range of options available for connector assembly, from efficient processing of the contacts with an automatic crimping tool to field installation with a simple hexagonal wrench.

Like the axial screw version, the crimp termination device also provides the safety of finger protected contacts and the availability of 16 coding options to avoid confusion with other interfaces. All these features are incorporated in a size 3 A housing: the most compact that HARTING offers with up to IP 67 protection.